• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.61-62
• /
• 2008

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.59-64
• /
• 2009

본 연구에서는 대기압 플라즈마를 이용하여 polylactic acid(PLA) 필름의 표면 특성 변화를 알아보았다. 극성 용매인 물과 비극성 용매인 Diiodomethane을 사용하여 표면의 접촉각을 측정하고, 이 값을 이용해 표면자유에너지 값을 계산하였다. 또한 대기압 플라즈마의 처리 조건에 따른 PLA 필름의 접촉각과 표면자유에너지 값을 최적화하였다. 그 결과 대기압 플라즈마 처리 시간 30 sec, RF-power 70 W, Ar 가스 유량은 6 lpm, 공기 중의 노출 시간은 5 min이었을 때가 가장 낮은 물 접촉각을 나타내었고, 표면자유에너지는 가장 높은 값을 나타내었다. XPS 분석을 통해서 대기압 플라즈마 처리 전 후 PLA 필름의 화학적 관능기의 변화를 분석하였으며, PLA 표면에 -C=O, -CO, -COO 등의 변화를 관찰하였다.

• 한국염색가공학회지
• /
• 제29권4호
• /
• pp.181-194
• /
• 2017

The biodegradability of polylactic acid(PLA) fabrics was evaluated by two methods: enzyme and soil degradation. Three different enzymes were selected to evaluate. Degradation times were measured at optimal enzyme treatment conditions. Biodegradation by enzymatic hydrolysis was compared with soil degradation. As a result, biodegradation created cracks on the fiber surface, which led to fiber thickening and shortening. In addition, new peak was observed at $18.5^{\circ}$ by degradation. Moreover, cracks indicating biofragmentation were confirmed by enzyme and soil degradation. By enzyme and soil degradation, the weight loss of PLA fabrics was occurred, there through, the tensile strength decreased about 25% by enzyme hydrolysis when 21 days after, and 21.67% by soil degradation when 60 days after. Furthermore, the biodegradability of PLA fabrics by enzymatic and soil degradation was investigated and enzymatic degradation was found to be superior to soil degradation of PLA fabrics. Among the three enzymes evaluated for enzymatic degradation, alcalase was the most efficient enzymes. This study established the mechanism of biodegradation of PLA nonwovens, which might prove useful in the textile industry.

• 청정기술
• /
• 제19권4호
• /
• pp.401-409
• /
• 2013

폐플라스틱에 의한 환경오염 증가로 생분해성 고분자에 대한 관심이 커지고 있다. 본 연구에서는 생분해성 고분자인 폴리 L-락타이드(polylactic acid, PLA)와 폴리 L-락타이드(polylactic acid, PLA)/폴리 부틸렌 숙신산(polybutylene succinate, PBS)(90/10)수지를 기지재료로 하고 유기 크로사이트(cloisite ) 20을 나노 클레이(clay) 20으로 사용하여 이축압출기에서 Clay-20 함량별 로 압출시켜 나노복합체를 제조하였다. 사출성형기로 사출성형시편을 제조하여 나노복합체의 열적, 기계적, 형태학적 및 라만 분광학 특성을 시차열량분석기(differential scanning calorimeter, DSC), 인장시험기, 주사전자현미경(scanning electron microcopy, SEM), 라만-현미경 분광광도계로 조사하였고, 또한 가수분해특성을 조사하였다. 시차열량분석기와 주사전자현미경 시험 결과에서 PLA/Clay-20과 PLA/PBS/Clay-20 나노복합체의 결정화도가 Clay-20 함량이 증가함에 따라 증가하였고, Clay-20과 PLA 및 PLA/PBS 수지가 서로 상용성이 있는 것으로 확인되었다. 또한 Clay-20 함량이 증가함에 따라 두 나노복합체의 인장강도는 감소하지만 신도, 충격강도, 인장탄성률 및 굴곡탄성률이 증가하였다. 특히 Clay-20이 5 wt% 첨가된 PLA/Clay-20과 PLA/PBS/Clay-20 나노복합체의 충격강도는 순수 PLA와 PLA/PBS (90/10) 보다 2배 이상으로 증가하였다. Clay-20 3 wt% 첨가된 PLA/Clay-20 나노복합체의 가수분해속도는 순수 PLA 가수분해속도보다 두 배 정도 빨랐다. 이는 유기화 처리된 Clay-20 나노입자 표면의 친수성으로 계면에서 가수분해가 쉽게 일어나기 때문인 것으로 판단된다. 본 연구에서 적당량의 Clay-20 첨가로 PLA의 기계적특성 개선과 생분해 특성 조절 가능성을 확인하였다.

• 한국의류학회지
• /
• 제35권6호
• /
• pp.670-677
• /
• 2011

This study is to optimize the enzymatic processing conditions of Polylactic Acid (PLA) fiber using lipase from Porcine pancreas as an environmental technology. Hydrolytic activity dependent on pH, temperature, enzyme concentration, and treatment time, and structural change of PLA fiber were evaluated. The PLA fiber hydrolysis by lipase was maximized at 50% (o.w.f) lipase concentration $50^{\circ}C$ for 120 minutes under pH 8.5. There was a change of the protein absorbance in the treatment solution before and after the lipase treatment. In addition, there was no substantial change in the molecular and crystalline structures of PLA by lipase treatment as confirmed by DSC, XRD, and FT-IR.

• 한국의류학회지
• /
• 제37권7호
• /
• pp.952-961
• /
• 2013

This study optimizes a suitable dyeing method for polylactic acid (PLA) fabrics using disperse dyes. For this, disperse red 60 (DR 60), disperse blue 56 (DB 56), and disperse yellow 54 (DY 54) were used and dyed on PLA fabrics dependent of dyeing temperature and time. The fastness of PLA fabrics dyed with three disperse dyes were evaluated; in addition, dye exhaustion, color strength (K/S value), and colorimetric properties of PLA fabrics were compared with PET fabrics. The experiments indicated optimum dyeability of PLA fabrics with disperse dyes. The dyeing temperature was $90^{\circ}C$ for every dye and the dyeing time were 20 min, 60 min, and 40 min for DR 60, DB 56, DY 54, respectively. PLA fabrics had good color fastness to washing, dry cleaning fastness, hot pressing fastness, rub fastness, and perspiration fastness by DR 60, DB 56, and DY 54. The dye exhaustion of PLA fabrics were lower than PET fabrics; however, K/S values were higher than PET fabrics.

• 한국축산식품학회지
• /
• 제36권3호
• /
• pp.421-426
• /
• 2016

Polylactic acid (PLA) is a biodegradable and renewable polymer, which represents a valuable alternative to plastic packaging films, often associated with environmental problems. In this study, we tested the suitability of PLA as a biodegradable packaging film and assessed the antimicrobial activity of lemongrass oil (LO), incorporated into the PLA film in different concentrations. To obtain the optimal physical properties for PLA films, tensile strength, elongation at break, and water vapor permeability were measured under different preparation conditions. In addition, the antimicrobial activity of the LO contained in the PLA film against Listeria monocytogenes was investigated by disc diffusion and viable cell count. Among all concentrations tested, 2% LO was the most suitable in terms of antimicrobial activity and physical properties of the PLA film. Based on these results, we used the PLA film containing 2% LO to pack pork sausages; after 12 d of storage at 4℃, the population of inoculated L. monocytogenes in the sausage samples wrapped with the PLA film containing 2% LO was reduced by 1.47 Log CFU/g compared with the control samples. Our data indicate that PLA films containing 2% LO represent a valuable means for antimicrobial sausage packaging.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.67-78
• /
• 2006

Modification of polylactic acid (PLA) and 10% maleic anhydride (MAH) with 15% dicumyl peroxide (DCP) based on MAH weight was conducted in the kneader at $160^{\circ}C$ and 30~70 rpm, for 15 min. The resulting MAH-modified PLA (PLA-MA) was then evaluated as a compatibilizer for PLA-wood flour (WF) composites. The FTIR and $^1H$-NMR analysis gave evidence of PLA-MA formation. After kneading and reacting with MAH and DCP, the number (Mn) and the weight average (Mw) molecular weights of PLA decreased as compared to the original PLA. The presence of WF in the composites decreased the tensile strength and several other physical properties. The higher the WF loading resulted in the greater the reduction of tensile strength. An addition of 10% PLA-MA as a compatibilizer to the composites improved the tensile strength and several other physical properties, increased the flow temperature, and decreased the melt viscosity. The improved composite revealed 1.42 times increased in tensile strength but not over PLA alone, and absorbed considerably less water compared to those of the composites free-compatibilizer.

• 한국산업융합학회 논문집
• /
• 제16권2호
• /
• pp.47-52
• /
• 2013

Aim of this study is to investigate the dimensional and shrinkage characteristics of the weft knitted fabrics with Polylactic acid(PLA) knitted yarn. This PLA knitted yarn was made of the biodegradability fiber. The structure of weft knitted fabrics that was utilized for this study is the plain stitch, which is the most basic structure among all weft knitted fabrics. As the stitch length is shorter, the stitch density, courses density, and wales density are more increasing. The stitch density increased as pre-treatment process and dyeing process progressed. On the contrary, the heat setting process made it decreasing. The MR(Machine Relaxation) and DR(Dry Relaxation) standard area shrinkage were increasing as wet process progressed and as the stitch lengths are long.

• 폴리머
• /
• 제39권2호
• /
• pp.261-267
• /
• 2015

The inclusion complexes (ICs) between polylactic acid (PLA) and ${\beta}$-cyclodextrin (CD) were prepared by co-precipitation method in this work. The orthogonal experiments were designed to investigate the influence of different factors on the formation of inclusion complexes. The results suggested that the optimum scheme of inclusion compounds could be obtained when the feeding ratio of CD to PLA (wt%) was 20:1, stirring speed was 6 kr/min and the stirring time was 30 min. The structures and properties of the inclusion complexes were characterized by $^1H$ NMR, FTIR, DSC, FT-Raman, XRD and TGA. The DSC results demonstrated that the crystallization behavior of the inclusion complexes nearly disappeared. It was found that ${\beta}$-CD-PLA inclusion complex had a better thermal stability compared with the neat PLA. The model of the inclusion complexes was proposed on the basis of XRD, $^1H$ NMR and DSC results.