• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.301-306
• /
• 2003

PID controller is applied mostly to two-order system. In third-order or higher- system, it's impossible to get high response quality because of having more zero point than the number of zero point being in the PID controller. To solve those, Jung & Dorf suggested a new type of PIDA controller and solved problen of a third-order system. But, as the result of getting step response using PIDA controller, rising time is very quickly but wide overshoot is happened. Beside designing PIDA controller with using CDM(Coefficient Diagram Method) suggested by shunji manabe. But, In Performance standard, CDM decreases overshoot to desired but rising time is very slow. Therefore this paper suggest a PD-PIDA controller for low overshoot with PD type Pre-compensator. This paper applied designed PD-PIDA controller to position control of 3-Phase induction motor.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.239-242
• /
• 2008

본 논문은 3차 이상의 고차 시스템에 적용 가능한 Jung & R. C. Dorf이 제안한 새로운 형태의 PIDA 제어기 설계에서 오버슈트에 대한 문제점을 해결하기 위해 Shunji Manabe에 의해 제안된 CDM(Coefficient Diagram Method)을 이용하여 PIDA 제어기를 설계하고, PD형 보상기를 추가하여 PD-PIDA 제어기를 제안한다. 설계된 PD-PIDA 제어기를 이용하여 3상 유도전동기에 적용하고 그 결과를 비교하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.11a
• /
• pp.353-360
• /
• 2000

A design of PIDA(Proportional-Integral-Derivative-Acceleration) controller for the third-order plant using the CDM(Coefficient Diagram Method) is presented. Using CDM, the closed-loop system with the designed PIDA controller can be made stable and satisfied both the transient and steady state response specifications without any adjustment. The effect of output step disturbance can also be lastly rejected. The fast step response of the controlled system can be achieved by reducing the equivalent time constant. The MATLABs simulation results show that the performances of the designed controlled system using CDM is better than the performance of the controlled system using PIDA controller designed by its own technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1521-1523
• /
• 2005

PID controller is applied mostly to two-order system. In third-order or higher- system, it's impossible to get high response quality because of having more zero point than the number of zero point being in the PID controller. To solve those, Jung & Dorf suggested a new type of PIDA controller and solved problen of a third-order system.. But, as the result of getting step response using PIDA controller, rising time is very quickly but wide overshoot is happened. Beside designing PIDA controller with using CDM(Coefficient Diagram Method) of Shunji Manabe decreases overshoot to desired but rising time is very slow. Therefore this paper suggest a I-PDA controller for low overshoot and fast responsibility. This paper applied designed PD-PIDA controller to position control of 3-Phase induction motor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.10
• /
• pp.974-981
• /
• 2009

In this paper, a method of auto-tuning of PID (Proportional-Integral-Derivative) and PIDA (Proportional-Integral-Derivative-Acceleration) controllers is proposed that can be applied to a time-delayed second order model. The proposed identification method is based on step responses, but it can be easily automated rising digital controller unlike the existing graphical identification methods. We provide a ways to yield parameter identifications which is independent to initial values of the plants. The tuning rule is based on the pole-placement strategy and is formulated so that it can be implemented using a digital controller with ease.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.395-400
• /
• 1998

A design of PIDA (Proportional-Integral-Derivative-Acceleration) controller for the third-order plant using the CDM (Coefficient Diagram Method) is presented. Using CDM, the closed-loop system with the designed PIDA controller can be made stable and satisfied both transient and steady state response specifications without any adjustment. The effect of output step disturbance can also be lastly rejected. The fast step response of the controlled system can be achieved by reducing the equivalent time constant. The MATLAB's simulation results show that the performances of the designed controlled system using CDM is better than the performances of the controlled system using PIDA controller designed by its own technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.310-313
• /
• 2002

In industrial actual control system, PID controller has been used with its high delicate control system in position control system. PID controller has simple structure and superior ability in several characteristics. When the response of system is changed by delay time, variable load , disturbances and external environment, control gain of PID controller must be readjusted on the system dynamic characteristics. Therefore, a control ability of PID controller is degraded when the control gain is inappropriately determined. When the response characteristic of system is changed under a condition, control gain of PID controller must be changed adaptively to be a waited response of system. In this paper an PIDA controller is constructed by Two-Layers Neural Network applying back-propagation(BP) algorithm. Form the result of compute. simulation in the proposed controller, its usefulness is verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.732-735
• /
• 2007

Recently the control of induction motor for position control has been extensively studied. The representative method is PIDA controller proposed by Jung&Dorf. By designed PIDA controller' parameter had large value. Moreover, this method is very analyze, so that, not adapted controller parameter in disturbance. Besides using generalize fuzzy controller. Because input and output membership function is linguistic type, therefore system response is very slow. So, in this paper we used optimized fuzzy controller. Optimized fuzzy controller is output membership function is unity value. The controller performance was estimated applied to induction motor' position control.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.473-480
• /
• 2005

A three axes marine satellite antenna has been developed. As a design step, a CAD model for the antenna has been created according to the design requirements. Kinematic analyses are carried out to insure design specification and to check collision detection of the CAD model. Marine satellite antennas experience base motions, and a relevant control system should control the three antenna axis to point to the satellites accurately. A sensor fusion algorithm and a PIDA (Proportional, Integral, Derivative, Acceleration) control algorithm are designed and implemented to control the yaw, level, and cross-level angle of a small size satellite marine antenna. Antenna stabilization control experiments are performed using a test simulator which gives the antenna base motions. Experimental results show small pointing errors, which is less than 0.2 degree for the level, cross-level, and yaw axis.

• Journal of the Korean association of regional geographers
• /
• v.5 no.1
• /
• pp.163-185
• /
• 1999

The purpose of this study is to develop the model of constructivist multimedia-assisted instruction(CMAI) and to analyze the effect of it in the secondary school geography. The main results are as follows : (1) The conceptual model of CMAI can be defined as an instruction aiming at making a person who has self-directed learning ability through constructivism and multimedia. The procedural model of CMAI based on PIDA instructional strategy is divided into four stages : prediction & explanation, inquiry activity, discussion & fixation, application & synthesis stage. (2) CMAI is typed by offline CMAI and online CMAI. that is, O/WCMAI(online CMAI by web-based courseware). Offline CMAI is subdivided into P/TCMAI(offline CMAI by presentation-based courseware) and C/RCMAI(offline CMAI by cd-rom based courseware) according to authoring tool and function. (3) Offline constructivist multimedia course-ware(offline courseware) was developed for 2 periods as the material to analyze the effect of CMAI. Offline courseware is received development level of it. (4) After offline courseware being applied to the class, the effect of it according the types of the CMAI instruction(lecture instruction, whole teaching, individualized learning, cooperative learning) was analyzed. As the result of analyzing the descriptive statistics of the level of learning achievement and instruction response, there isn't big relationship between them. As the result of analyzing the inferential statistics of the level of learning achievement, there wasn't significant difference between the types of CMAI instruction in whole student of the classes and certain students who improved their grades. But as the result of analyzing of the level of instruction response, there was significant difference between lecture instruction and other types of the CMAI instruction(whole teaching, individualized learning, cooperative learning).