• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.84-87
• /
• 2002

This paper presents an adaptive PID control scheme with fuzzy model for nonlinear system. TSK(Takagi-Sugeno-Kang) fuzzy model was used to estimate the error of control input, and the parameter of PID controller was adapted from the error The parameter of TSK fuzzy model was also adapted to plant by comparing the activity output of plant and model output. PID controller which was adapted the uncertainty of nonlinear plant and the change of parameter can be designed by using the presented method. The usefullness of algorithm which was proposed by the simulation of several nonlinear system was also certificated.

• International Journal of Automotive Technology
• /
• v.4 no.4
• /
• pp.181-191
• /
• 2003

Since the nonlinearity and uncertainties which inherently exist in vehicle system need to be considered in active suspension control law design, this paper proposes a new control strategy for active vehicle suspension systems by using a combined control scheme, i.e., respectively using a genetic algorithm (GA) based self-tuning PID controller and a fuzzy logic controller in two loops. In the control scheme, the PID controller is used to minimize vehicle body vertical acceleration, the fuzzy logic controller is to minimize pitch acceleration and meanwhile to attenuate vehicle body vertical acceleration further by tuning weighting factors. In order to improve the adaptability to the changes of plant parameters, based on the defined objectives, a genetic algorithm is introduced to tune the parameters of PID controller, the scaling factors, the gain values and the membership functions of fuzzy logic controller on-line. Taking a four degree-of-freedom nonlinear vehicle model as example, the proposed control scheme is applied and the simulations are carried out in different road disturbance input conditions. Simulation results show that the present control scheme is very effective in reducing peak values of vehicle body accelerations, especially within the most sensitive frequency range of human response, and in attenuating the excessive dynamic tire load to enhance road holding performance. The stability and adaptability are also showed even when the system is subject to severe road conditions, such as a pothole, an obstacle or a step input. Compared with conventional passive suspensions and the active vehicle suspension systems by using, e.g., linear fuzzy logic control, the combined PID and fuzzy control without parameters self-tuning, the new proposed control system with GA-based self-learning ability can improve vehicle ride comfort performance significantly and offer better system robustness.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.218-226
• /
• 2003

Due to the friction characteristics of pump, cylinder packing and passenger car, in the elevation system actuated with hydraulic inverter, there exist dead zones. which cannot be controlled by a PID controller. To overcome the drawbacks, in this paper, we propose a new hybrid fuzzy-sliding mode control scheme, which controls the controller output between a sliding mode control output and a PID control output by fuzzy control method. The proposed hybrid control scheme achieves an improved control performance by using both controllers. We first propose a design method of the hybrid controller far a hydraulic system controlled by inverters, then propose a design method of a hybrid fuzzy-sliding mode centre] scheme. The effectiveness of the proposed control scheme is shown by simulation results, in which the proposed hybrid control method yields better control performance then the PID controlled scheme, not only in the zero-crossing speed region but also in the overall control region including steady-state region.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1242-1244
• /
• 1992

This Paper deals with a Auto-Tuning Fuzzy PID Controller used in real time and its application for induction motor. The control strategy of the controller is able to develop and improve automatically. The new Auto-Tuning Fuzzy PID Control algorithm which modifies the fuzzy control decision table is presented in this paper. It can automatically refine an initial approximate set of fuzzy rules. The possibility of applying fuzzy algorithms in faster response, and more accurate was compared with other industrial processes, such as AC Motor driver. The performance of Proportional_Integral Derivative(PID) control and this fuzzy controllers is compared in terms of steady_state error, settling time, and response time. And then, Limitations of fuzzy control algorithms are also described.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.807-815
• /
• 2004

This paper describes the design principle of a fuzzy PID controller with fixed parameters, proposes the simulified form of a fuzzy PID controller to increase the computational efficiency and analyzes stability of a proposed fuzzy PID controller. After a detailed stability analysis using ‘small gain theorem’, a simple and practical sufficient condition for the BIBO stability of the overall feedback control system is derived. The derived stability condition offers a calculation method to obtain parameters of a fuzzy PID controller from parameters of a stable PID controller. Finally several computer simulations are executed to confirm the effectiveness of the fuzzy PID controller with fixed parameters.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2251-2260
• /
• 2021

The motion control of the divertor maintenance system of the China Fusion Engineering Test Reactor (CFETR) was studied in this paper, in which CFETR Multi-Functional Maintenance Platform (MFMP) was simplified as a parallel robot for the convenience of theoretical analysis. In order to design the motion controller of parallel robot, the kinematics analysis of parallel robot was carried out. After that, the dynamic modeling of the hydraulic system was built. As the large variation of heavy payload on MFMP and highly nonlinearity of the system, A Fuzzy-PID controller was built for self-tuning PID controller parameters by using Fuzzy system to achieve better performance. In order to test the feasibility of the Fuzzy-PID controller, the simulation model of the system was built in Simulink. The results have showed that Fuzzy-PID controller can significantly reduce the angular error of the moving platform and provide the stable motion for transferring the divertor.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.274-280
• /
• 2005

The system parameters of gas turbine engine tend to change remarkably in real operating condition. It means that operators have to consider environment and suitably control fuel flow. The conventional PID controller, however, can not guarantee good control performance in the aspect of system parameter change. This paper, therefore, proposes a scheme for integrating PID control and fuzzy technique to obtain the good performance of gas turbine engine speed control on the whole operating range. The effectiveness of the proposed fuzzy PID controller is verified through computer simulation.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.338-341
• /
• 1994

This paper presents a Fuzzy-PID controller based on Fuzzy logic. Up to now PID controller has had the difficulty of obtaining the optimal gain, and Fuzzy controller has had the difficulty of determining scale factor affecting the performance of control. So that a Fuzzy-PID controller is presented here self tuning of the scale factor and optimal gain. The results of simulation show a good performance in comparison with Ziegler-Nichols controller, having the generality of determining the components of scale factor in Fuzzy rule.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2352-2360
• /
• 2007

Due to the friction characteristics of cylinders and the rail of a passenger car, in the elevator actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. In this paper, the friction characteristics of a cylinder is examined, which may cause the abrupt increase of the acceleration in the zero-costing speed region. To overcome the drawbacks of a PID controlled hydraulic elevator system, a zooming fuzzy logic controller is designed and finally an improved hybrid fuzzy controller is proposed. The effectiveness of the proposed control scheme are shown by simulation and experimental results, which the proposed fuzzy hybrid control method yields good control performance not only in the zero-crossing speed region but also in the overall control region including steady-state region.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.621-623
• /
• 1999

In this paper, Model following PID control system, which is combined PID controller with Model Reference Adaptive Controller, is proposed. To decrease complex and much calculation which is produced in tuning process, the tuning method of parameter with fuzzy algorithm is introduced. Fuzzy algorithm isn't used in the form of controller generally much used, but tuner. Experimental results show that proposed controller has the PID parameter be tuned by fuzzy algorithm. Therefore, We expect model following PID to be operated in the real-time control.