• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.127-129
• /
• 2008

This paper describes a method of approximate reasoning for fuzzy control of servo system, based on decomposition of -level fuzzy sets. It is propose that logic circuits for fuzzy PI+PD are a body from fuzzy inference to defuzzificaion in cases where the output variable u directly is generated PWM. The effectiveness for robust and faster response of the fuzzy control scheme is verified for a variable parameter by comparison with a PID control and fuzzy control. A position control of DC servo system with a fuzzy logic controller successfully demonstrated.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.155-164
• /
• 2006

This paper focuses on a new optimization technique of a fuzzy logic based proportional integral (FLPI) load frequency controller by the multiple tabu search (MTS) algorithm. Conventionally, the membership functions and control rules of fuzzy logic control are obtained by trial and error method or experiences of designers. To overcome this problem, the MTS algorithm is proposed to simultaneously tune proportional integral gains, the membership functions and control rules of a FLPI load frequency controller in order to minimize the frequency deviations of the interconnected power system against load disturbances. The MTS algorithm introduces additional techniques for improvement of the search process such as initialization, adaptive search, multiple searches, crossover and restart process. Simulation results explicitly show that the performance of the proposed FLPI controller is superior to conventional PI and FLPI controllers in terms of overshoot and settling time. Furthermore, the robustness of the proposed FLPI controller under variation of system parameters and load change are higher than that of conventional PI and FLPI controllers.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.209-216
• /
• 1996

This paper deals with the speed control of the switched reluctnace motor using fuzzy PI controller. A fuzzy logic control provides a good approach to nonlinear system because it does not require a detailed mathematical model to formulate the algorithm. The fuzzy PI controller is implemented by MCS80C196KB, a 16 bit one-chip microcontroller, and an EPROM is used for the commutation logic of the SRM. The simulation and experimental results show that the performance of the fuzzy PI controller is superior to that of the conventional PI controller in terms of response time, settling time and overshoot. In particular, the robustness of the system is largely improved.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.234-239
• /
• 2009

In this article we present the simulation results of induction motor speed regulation by direct torque control with a classic PI regulator. The MATLAB Simulink programming environment is used as a simulation tool. The results obtained, using a fuzzy logic, shows the importance of this method in the improvement of the performance of such regulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.164-170
• /
• 2013

Quadrotor UAV (Unmanned Aerial Vehicle) is a flying robotic platform which has drawn lots of attention in the recent years. The attraction comes from the fact that it is able to perform agile VTOL (Vertical Take-Off Landing) and hovering functions. In addition, the efficient modular structure composed of four electric rotors makes its design easier compared to other single-rotor type helicopters. In many cases, a quadrotor often utilizes vision systems in order to obtain altitude control and navigation solution in hostile environments where GPS receivers are not working or deniable. For carrying out their successful missions, it is essential for flight control systems to have fast and stable control responses of heading angle outputs. This paper presents a Fuzzy Logic based lateral PI controller to stabilize and control the quadrotor vehicle equipped with vision systems. The advantage of using the fuzzy based PI controller lies in the fact that it could acquire a desired output response of a heading angle even in presence of disturbances and uncertainties. The performance comparison of the newly proposed Fuzzy-PI controller and the conventional PI controller was carried out with various simulation results.

• Journal of Korea Multimedia Society
• /
• v.18 no.11
• /
• pp.1400-1407
• /
• 2015

In the paper, we suggest bettered EHMECS(Enhanced Hybrid Multi Electrical Cupping System) to regulate automatically vacuum pressure using many cupping cup at once. We controlled accurately the pressure using S-PI control technique in pump motor to input the air inside cupping cup. S-PI control compared constant velocity, load and velocity variance between existing PI and FLC(Fuzzy Logic Control). The stabilization time of suggested S-PI control improve 20% of existing PI and 8% of FLC. The error constant of normal condition improved 71% of existing PI and 62% of FLC in steady speed and 80% of existing PI and 67% of FLC in load change. Also the error constant about velocity variance improve 45% of PI control. It is prove the suggested S-PI control technique. When use long time vacuum pressure of cupping cup regulated the suggested S-PI control technique, can loosen knotted muscles.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.299-308
• /
• 1998

In this paper, reliable switched reluctance motor(SRM) drive system and 4-rule based fuzzy logic modifier(FLM) of the conventional PI controller are presented. The i80C196KC, low-cost one-chip microcontroller is used for designing SRM drive controller which include the speed controller and the starting sequence. The fuzzy logic modifier which exhibits a stabilizing effects on the closed-loop system, has good robustness regarding the improperly tuned PI controller. The simulation and experimental results are performed to verify the capability of proposed control method on 6/4 salient type SRM.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.891-894
• /
• 1993

To improve limitations of fuzzy PI controller especially when applied to high order systems, we propose two types of fuzzy logic controllers that take out appropriate amounts of accumulated control input according to fuzzily described situations in addition to the incremental control input calculated by conventional fuzzy PI controllers. The structures of the proposed controller were motivated by the problems of fuzzy PI controllers that they generally give inevitable overshoot when one tries to reduce rise time of response especially when one tries to reduce rise time of response especially when a system of order higher than one is under consideration. Since the undesirable characteristics of the fuzzy PI controller are caused by integrating operation of the controller, even though the integrator itself is introduced to overcome steady state error in response, we propose two fuzzy controllers that fuzzily clear out integrated quantities according to situation. The first contr ller determines the fuzzy resetting rate by situations described fuzzily by error and error rate, and the second one by error and control input. The two structures both give reduced rise time as well as small overshoot. To show the usefulness of the proposed controller, that are applied to systems that are difficult to get satisfactory response by conventional fuzzy PI controllers.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1147-1150
• /
• 2001

This paper represents a realization of a fuzzy PI control method for a speed control of BLDC motor. In other words, the gains of the PI controller is tuned by a fuzzy logic controller. Simplified reasoning methods are used for fuzzy reasoning. Fuzzy logic speed controller is designed by using the high performance of DSPchip(TMS320F240). By experiment, it is confirmed that the speed of BLDC motor well follows an command speed in the load variables or speed variables.

• Journal of Power Electronics
• /
• v.11 no.6
• /
• pp.914-921
• /
• 2011

Commencing with incandescent light bulbs, every load today creates harmonics. Unfortunately, these loads vary with respect to their amount of harmonic content and their response to problems caused by harmonics. The prevalent difficulties with harmonics are voltage and current waveform distortions. In addition, Electronic equipment like computers, battery chargers, electronic ballasts, variable frequency drives, and switching mode power supplies generate perilous amounts of harmonics. Issues related to harmonics are of a greater concern to engineers and building designers because they do more than just distort voltage waveforms, they can overheat the building wiring, cause nuisance tripping, overheat transformer units, and cause random end-user equipment failures. Thus power quality is becoming more and more serious with each passing day. As a result, active power filters (APFs) have gained a lot of attention due to their excellent harmonic compensation. However, the performance of the active filters seems to have contradictions with different control techniques. The main objective of this paper is to analyze shunt active filters with fuzzy and pi controllers. To carry out this analysis, active and reactive current methods ($i_d-i_q$) are considered. Extensive simulations were carried out. The simulations were performed under balance, unbalanced and non sinusoidal conditions. The results validate the dynamic behavior of fuzzy logic controllers over PI controllers.