• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.84-90
• /
• 2000

Biodegradation of vanous medium-chain-length polyhydroxyalkanoates (MCL-PHAs) by an extracellular depolymerase system from Pseudomonas sp. RY-1 was investigated under laboratoly conditions. The degradation rate of the polymers was determined by quantitative clem zone technique, enzyme (turbidity) assay, and respirometry assay. Although the enzyme system secreted by Pscudomor~as sp. RY-1 was capable of degrading all MCL-PHAs tested. its secretion was influenced by the availability of secondary carbon sources. The rate of enzymatic degradation of MCL-PHAs was dependent upou the monomeric composition of the polyesters and reduced as the chain lengths of the monomer m t s in the polyesters increased. MCL-PHAs containing C-even monomer units showed faster degradation rate than MCL-PHAs containing C-odd monomer units. Respiration rates of MCL-PHAs with C-even monomer uuts were also much faster than those of MCL-PHAs with C-odd monomer units. The degmdation rate of MCL-PHAs bearing unsaturated substituents was faster than that of mcl-PHAs without functional substituents, which is suggesting the correlation between the degradation rate and the crystallinity of MCL-PHAs.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.3
• /
• pp.371-377
• /
• 2012

The present study describes medium-chain-length polyhydroxyalkanoates (mcl-PHAs) production by the Pseudomonas Gl01 strain isolated from mixed microbial communities utilized for PHAs synthesis. A two-step fed-batch fermentation was conducted with glucose and waste rapeseed oil as the main carbon source for obtaining cell growth and mcl-PHAs accumulation, respectively. The results show that the Pseudomonas Gl01 strain is capable of growing and accumulating mcl-PHAs using a waste oily carbon source. The biomass value reached 3.0 g/l of CDW with 20% of PHAs content within 48 h of cultivation. The polymer was purified from lyophilized cells and analyzed by gas chromatography (GC). The results revealed that the monomeric composition of the obtained polyesters depended on the available substrate. When glucose was used in the growth phase, 3-hydroxyundecanoate and 3-hydroxydodecanoate were found in the polymer composition, whereas in the PHAs-accumulating stage, the Pseudomonas Gl01 strain synthesized mcl-PHAs consisting mainly of 3-hydroxyoctanoate and 3-hydroxydecanoate. The transcriptional analysis using reverse-transcription real-time PCR reaction revealed that the phaC1 gene could be transcribed simultaneously to the phaZ gene.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.406-420
• /
• 1995

Polyhydroxyalkanoates[PHAs] are the polyester of hydroxyalkanoates(HAs) synthesized by numerous bacteria as an intracellular carbon and energy storage compound and accumulated as granules in the cytoplasm of the cells under unbalanced growth condition in the presence of excess carbon source. Even though PHAs have been recognized as good candidates for biodegradable plastics, their high price compared with conventional plastics has limited their use in a wide mange of applications. To reduce the high production cost of PHAs, many group of scientists have devoted much efforts to improve productivity by employing various microorganisms and by developing efficient culture techniques. The strategies of producing PHAs to a high concentration with high productivity and their potential applications are reviewed.

• Journal of Microbiology
• /
• v.45 no.2
• /
• pp.87-97
• /
• 2007

Medium-chain-length polyhydroxyalkanoates (MCL-PHAs), which have constituents with a typical chain length of $C_{6}-C_{14}$, are polyesters that are synthesized and accumulated in a wide variety of Gram-negative bacteria, mainly pseudomonads. These biopolyesters are promising materials for various applications because they have useful mechanical properties and are biodegradable and biocompatible. The versatile metabolic capacity of some Pseudomonas spp. enables them to synthesize MCL-PHAs that contain various functional substituents; these MCL-PHAs are of great interest because these functional groups can improve the physical properties of the polymers, allowing the creation of tailor-made products. Moreover, some functional substituents can be modified by chemical reactions to obtain more useful groups that can extend the potential applications of MCL-PHAs as environmentally friendly polymers and functional biomaterials for use in biomedical fields. Although MCL-PHAs are water-insoluble, hydrophobic polymers, they can be degraded by microorganisms that produce extracellular MCL-PHA depolymerase. MCL-PHA-degraders are relatively uncommon in natural environments and, to date, only a limited number of MCL-PHA depolymerases have been investigated at the molecular level. All known MCL-PHA depolymerases share a highly significant similarity in amino acid sequences, as well as several enzymatic characteristics. This paper reviews recent advances in our knowledge of MCL-PHAs, with particular emphasis on the findings by our research group.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.206-215
• /
• 2005

Polyhydroxyalkanoates (PHAs) are homo or hetero polyesters of (R)-hydroxyalkanoates accumulated in various microorganisms under growth-limiting condition in the presence of excess carbon source. They have been suggested as biodegradable substitutes for chemically synthesized polymers. Recombinant Escherichia coli is one of the promising host strains for the economical production of PHAs, and has been extensively investigated for the process development. The heterologous PHA biosynthetic pathways have been established through the metabolic engineering and inherent metabolic pathways of E. coli have been redirected to supply PHA precursors. Fermentation strategies for cultivating these recombinant E. coli strains have also been developed for the efficient production of PHAs. Nowadays, short-chain-length (SCL) PHAs are being re-invited due to its improved mechanical properties and possible applications in the biomedical area. In this article, recent advances in the development of metabolically engineered E. coli strains for the enhanced production of SCL-PHAs are reviewed. Also, medical applications of SCL-PHAs are discussed.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.363-370
• /
• 2015

The production of polyhydroxyalkanoates (PHAs) using Sequencing Batch Reactor (SBR) was investigated. The experiments were performed in two fabricated SBRs (4 L) of different oxidation state. Synthetic wastewater was used as substrate, using C/N/P ratio of 42:10:1. SBR 1 and SBR 2 were operated in aerobic dynamic feeding (ADF) and anaerobic/oxic dynamic feeding (AODF) condition, respectively. ADF provide feast and famine in aerobic condition, while AODF in anaerobic/oxic condition. PHAs production was found high in AODF than AOF. Maximum PHAs content of 40.0% (w/w)of biomass were produced in AODF mode. Produced PHAs structural and thermal property were good.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.3
• /
• pp.594-601
• /
• 2010

Azotobacter chroococcum H23 (CECT 4435), Azotobacter vinelandii UWD, and Azotobacter vinelandii (ATCC 12837), members of the family Pseudomonadaceae, were used to evaluate their capacity to grow and accumulate polyhydroxyalkanoates (PHAs) using two-phase olive mill wastewater (TPOMW, alpeorujo) diluted at different concentrations as the sole carbon source. The PHAs amounts (g/l) increased clearly when the TPOMW samples were previously digested under anaerobic conditions. The MNR analysis demonstrated that the bacterial strains formed only homopolymers containing $\beta$-hydroxybutyrate, either when grown in diluted TPOMW medium or diluted anaerobically digested TPOMW medium. COD values of the diluted anaerobically digested waste were measured before and after the aerobic PHA-storing phase, and a clear reduction (72%) was recorded after 72 h of incubation. The results obtained in this study suggest the perspectives for using these bacterial strains to produce PHAs from TPOMW, and in parallel, contribute efficiently to the bioremediation of this waste. This fact seems essential if bioplastics are to become competitive products.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.1
• /
• pp.110-116
• /
• 2022

Polyhydroxyalkanoates (PHAs) are emerging as alternatives to plastics by replacing fossil fuels with renewable raw substrates. Herein, we present the construction of engineered Escherichia coli strains to produce short-chain-length PHAs (scl-PHAs), including the monomers 4-hydroxyvalerate (4HV) and 3-hydroxyvalerate (3HV) produced from levulinic acid (LA). First, an E. coli strain expressing genes (lvaEDABC) from the LA metabolic pathway of Pseudomonas putida KT2440 was constructed to generate 4HV-CoA and 3HV-CoA. Second, both PhaAB enzymes from Cupriavidus necator H16 were expressed to supply 3-hydroxybutyrate (3HB)-CoA from acetyl-CoA. Finally, PHA synthase (PhaC_Cv) from Chromobacterium violaceum was introduced for the subsequent polymerization of these three monomers. The resulting E. coli strains produced four PHAs (w/w% of dry cell weight): 9.1 wt% P(4HV), 1.7 wt% P(3HV-co-4HV), 24.2 wt% P(3HB-co-4HV), and 35.6 wt% P(3HB-co-3HV-co-4HV).

• Journal of Microbiology and Biotechnology
• /
• v.13 no.4
• /
• pp.632-635
• /
• 2003

Novel poly(3-hydroxyalkanoates), PHAs, having either methoxy or ethoxy groups as the terminal hydrophilic moieties, were biosynthesized by Pseudolnons oleovorans. grown either solely with 11-alkoxyundecanoic acid or 8-alkoxyoctanoic acid, or grown with a mixture of 6-alkoxyhexanoic acid and nonanoic acid. The PHA synthesized from 11-methoxyundecanoic acid consisted of 88 mol% 3-hydroxy-7-methoxyheptanoate and 12 mol% 3-hydroxy-9-methoxynonanoate. However, the PHA produced from 11-ethoxyundecanoic acid consisted of 56 mol% 3-hydroxy-5-ethoxypentanoate and 44 mol% 3-hydroxy-7-ethoxyheptanoate. The high solubility of the PHAs in methanol and ethanol indicated that the alkoxy groups in the side chains resulted in the formation of PHAs with an enhanced hydrophilicity.

• Elastomers and Composites
• /
• v.50 no.3
• /
• pp.175-183
• /
• 2015

A series of fluorinated aromatic poly(hydroxyamide)s (PHAs) were synthesized by direct polycondensation of diacides containing 2,6-dimethylphenoxy group and quinoxaline ring in the main chain with 2,2-bis-(3-amino-4-hydroxyphenyl) hexafluoropropane. The PHAs had relatively low inherent viscosities in the range of 0.35~0.43 dL/g at $35^{\circ}C$ in DMAc solution. All PHAs exhibited excellent solubility in aprotic solvents such as NMP, DMAc, DMF and DMSO as well as in common organic solvents such as pyridine, THF, and m-cresol at room temperature. However, the poly(benzoxazole)s (PBOs) were quite insoluble in all organic solvents except partially soluble in concentrated sulfuric acid. The PBOs showed glass transition temperatures between 233 and $284^{\circ}C$ by DSC and maximum weight loss temperatures in the range of $536-546^{\circ}C$ by TGA.