• Applied Science and Convergence Technology
• /
• 제23권1호
• /
• pp.44-47
• /
• 2014

In this study, we investigated the basic properties of N-doped ethylcyclohexene plasma polymer thin films that deposited by radio frequency (13.56 MHz) plasma-enhanced chemical vapor deposition (PECVD) method with controlled ammonia flow rate. Ethylcyclohexene was used as organic precursor with hydrogen gas as the precursor bubbler gas. Additionally, ammonia ($NH_3$) gas was used as nitrogen dopant. The as-grown polymerized thin films were analyzed using ellipsometry, Fourier-transform infrared [FT-IR] spectroscopy, UV-Visible spectroscopy, and water contact angle measurement. We found that with increasing plasma power, film thickness is gradually increased while optical transmittance is drastically decreased. However, under the same plasma condition, water contact angle is decreased with increasing $NH_3$ flow rate. The FT-IR spectra showed that the N-doped ethylcyclohexene plasma polymer films were completely fragmented and polymerized from ethylcyclohexane.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제1권1호
• /
• pp.87-94
• /
• 2001

Silicon nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) are useful for a variety of applications, including anti-reflecting coatings in solar cells, passivation layers, dielectric layers in metal/insulator structures, and diffusion masks. PECVD systems are controlled by many operating variables, including RF power, pressure, gas flow rate, reactant composition, and substrate temperature. The wide variety of processing conditions, as well as the complex nature of particle dynamics within a plasma, makes tailoring SiN film properties very challenging, since it is difficult to determine the exact relationship between desired film properties and controllable deposition conditions. In this study, SiN PECVD modeling using optimized neural networks has been investigated. The deposition of SiN was characterized via a central composite experimental design, and data from this experiment was used to train and optimize feed-forward neural networks using the back-propagation algorithm. From these neural process models, the effect of deposition conditions on film properties has been studied. A recipe synthesis (optimization) procedure was then performed using the optimized neural network models to generate the necessary deposition conditions to obtain several novel film qualities including high charge density and long lifetime. This optimization procedure utilized genetic algorithms, hybrid combinations of genetic algorithm and Powells algorithm, and hybrid combinations of genetic algorithm and simplex algorithm. Recipes predicted by these techniques were verified by experiment, and the performance of each optimization method are compared. It was found that the hybrid combinations of genetic algorithm and simplex algorithm generated recipes produced films of superior quality.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.447-455
• /
• 2014

본 연구에서는 4H-SiC MOSFET의 주요 문제점인 $SiC/SiO_2$ 계면의 특성을 향상시키기 위해 PECVD (plasma enhanced chemical vapor deposition) 공정을 이용하여 n-based 4H-SiC MOS Capacitor를 제작하였다. 건식 산화 공정의 낮은 성장속도, 높은 계면포획 밀도와 $SiO_2$의 낮은 항복전계 등의 문제를 극복하기 위하여 PECVD와 NO어닐링 공정을 사용하여 MOS Capacitor를 제작하였다. 제작이 끝난 후, MOS Capacitor의 계면특성을 hi-lo C-V 측정, I-V 측정 및 SIMS를 이용해 측정하고 평가하였다. 계면의 특성을 건식 산화의 경우와 비교한 결과 20% 감소한 평탄대 전압 변화, 25% 감소한 $SiO_2$ 유효 전하 밀도, 8MV/cm의 증가한 $SiO_2$ 항복전계 및 1.57eV의 유효 에너지 장벽 높이, 전도대 아래로 0.375~0.495eV만큼 떨어져 있는 에너지 영역에서 69.05% 감소한 계면 포획 농도를 확인함으로써 향상된 계면 및 산화막 특성을 얻을 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.16.2-16.2
• /
• 2011

Graphene has attracted significant attention due to its unique characteristics and promising nanoelectronic device applications. For practical device applications, it is essential to synthesize high-quality and large-area graphene films. Graphene has been synthesized by eloborated mechanical exfoliation of highly oriented pyrolytic graphite, chemical reduction of exfoliated grahene oxide, thermal decomposition of silicon carbide, and chemical vapor deposition (CVD) on metal substrates such as Ni, Cu, Ru etc. The CVD has advantages over some of other methods in terms of mass production on large-areas substrates and it can be easily separated from the metal substrate and transferred to other desired substrates. Especially, plasma-enhanced CVD (PECVD) can be very efficient to synthesize high-quality graphene. Little information is available on the synthesis of graphene by PECVD even though PECVD has been demonstrated to be successful in synthesizing various carbon nanostructures such as carbon nanotubes and nanosheets. In this study, we synthesized graphene on $Ni/SiO_2/Si$ and Cu plate substrates with CH4 diluted in $Ar/H_2$ (10%) by using an inductively-coupled PECVD (ICPCVD). High-quality graphene was synthesized at as low as $700^{\circ}C$ with 600 W of plasma power while graphene layer was not formed without plasma. The growth rate of graphene was so fast that graphene films fully covered on substrate surface just for few seconds $CH_4$ gas supply. The transferred graphene films on glass substrates has a transmittance at 550 nm is higher 94%, indicating 1~3 monolayers of graphene were formed. FETs based on the grapheme films transferred to $Si/SiO_2$ substrates revealed a p-type. We will further discuss the synthesis of graphene and doped graphene by ICPVCD and their characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.253-253
• /
• 2012

Low temperature SiOx film process has being required for both silicon and oxide (IGZO) based low temperature thin film transistor (TFT) for application of flexible display. In recent decades, from low density and high pressure such as capacitively coupled plasma (CCP) type plasma enhanced chemical vapor deposition (PECVD) to the high density plasma and low pressure such as inductively coupled plasma (ICP) and electron cyclotron resonance (ECR) have been used to researching to obtain high quality silicon oxide (SiOx) thin film at low temperature. However, these plasma deposition devices have limitation of controllability of process condition because process parameters of plasma deposition such as RF power, working pressure and gas ratio influence each other on plasma conditions which non-leanly influence depositing thin film. In compared to these plasma deposition devices, neutral beam assisted chemical vapor deposition (NBaCVD) has advantage of independence of control parameters. The energy of neutral beam (NB) can be controlled independently of other process conditions. In this manner, we obtained NB dependent high crystallized intrinsic and doped silicon thin film at low temperature in our another papers. We examine the properties of the low temperature processed silicon oxide thin films which are fabricated by the NBaCVD. NBaCVD deposition system consists of the internal inductively coupled plasma (ICP) antenna and the reflector. Internal ICP antenna generates high density plasma and reflector generates NB by auger recombination of ions at the surface of metal reflector. During deposition of silicon oxide thin film by using the NBaCVD process with a tungsten reflector, the energetic Neutral Beam (NB) that controlled by the reflector bias believed to help surface reaction. Electrical and structural properties of the silicon oxide are changed by the reflector bias, effectively. We measured the breakdown field and structure property of the Si oxide thin film by analysis of I-V, C-V and FTIR measurement.

• 한국재료학회지
• /
• 제13권3호
• /
• pp.150-154
• /
• 2003

Amorphous carbon nitride films were deposited on Si(001) substrates by a plasma enhanced chemical vapor deposition technique (PECVD) using $CH_4$and $N_2$as reaction gases. The growth and film properties were investigated while the gas ratio and the working pressure were changed systematically. At 1 Torr working pressure, an increase in the $N_2$partial pressure results in a significant increase of the deposition rate as well as an apparent presence of C ≡N bonding, while little affecting the microstructure and amorphus nature of the films. In the case of changing the working pressure at a fixed $N_2$partial pressure of 98%, a film grown at a medium pressure of $1${\times}$10^{-2}$ Torr shows the most prominent C=N bonding nature and photoluminescent property.

• 전기의세계
• /
• 제34권8호
• /
• pp.470-475
• /
• 1985

우주물질의 대부분이 플라즈마 상태에 있지마는 지구상에서는 천둥이 칠 때 생기는 방전이나 극지방에서 볼 수 있는 오로라와 같이 극히 일부분이 자연상태의 프라즈마로 존재한다. 지금까지 플라즈마의 이용은 그것이 내는 밝은 빛을 이용한 조명이나, 높은 열을 이용한 용접이나 절단이 고작이었으나, 최근에 들어 초고온, 고밀도 플라즈마를 이용한 핵융합 에너지 연구나 Free Electron Laser나 Gyrotron과 같이 새로운 Radiation Source로써 종래의 Source가 만들지 못하던 주파수 영역이나 Glow Discharge에서 생기는 저온 Plasma를 이용한 Plasma Etching PECVD(Plasma Enhanced CHemical Vapor Deposition), Plasma Ashing, Sputtering등은 VLSI의 제조에 필요불가결한 공정의 일부분이 되고 있다. 앞으로 수회에 걸쳐 본 기술해설란을 통하여 이들 Plasma의 이용 기술을 소개하고자 하며 본회에서는 그중에서 Plasma Etching에 대해서 그 원리와 기술상의 특징을 살펴보고자 한다.

• 한국진공학회지
• /
• 제1권2호
• /
• pp.277-285
• /
• 1992

플라즈마 화학기상증착법과 저압 화학기상증착법을 사용하여 실리콘 기판 위에 텅 스텐 박막을 증착하였다. 반응기체로 WF6를 사용하였으며 환원기체로는 SiH4를 사용하였다. 플라즈마 증착법에 의한 텅스텐 박막의 성장은 환원기체의 유무에 상관없이 주로 기상 반응 에 의한 텅스텐 덩어리들의 증착에 의하여 이루어졌으며 비교적 균일도가 낮은 박막표면을 이루었다. 저압 화학증착법의 경우 환원기체를 사용하지 않았을 때에는 실리콘 기판에 의한 제한된 환원반응에 의해 텅스텐이 증착되었으나, 환원기체를 사용했을 때에는 초기의 실리 콘 기판에 의한 환원반응과 이어 일어나는 SiH4 기체와의 불균일계 환원반응의 두 단계반응 에 의하여 텅스텐 박막 증착이 이루어졌다. 저압 화학증착법의 경우 텅스텐 박막의 특성은 플라즈마 증착법에서 보다 우수하였으며 박막 성장은 island by island 양식을 따르는 것으 로 추정되었다. 박막은 $\alpha$-W의 체심입방 구조로 이루어졌으며 박막이 성장함에 따라 단결정 구조가 증가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.306-306
• /
• 2010

A high density (> $10^{11}\;cm^{-3}$) and low electron temperature (< 2 eV) plasma is produced by using a conventional HF (13.56 MHz) plasma enhanced chemical vapor deposition (PECVD) with an additional ultra high frequency (UHF, 314 MHz) plasma source utilizing two parallel antenna assembly. It is applied for the high rate synthesis of high quality nanocrystalline silicon (nc-Si) films. A high deposition rate of 1.8 nm/s is achieved with a high crystallinity (< 70%), a low spin density (< $3{\times}10^{16}\;cm^{-3}$) and a high light soaking stability (< 1.5). Optical emission spectroscopy measurements reveal emission intensity of $Si^*$ and $SiH^*$, intensity ratio of $H{\alpha}/Si^*$ and $H{\alpha}/SiH^*$ which are closely related to film deposition rate and film crystallinity, respectively. A high flux of precursor and atomic hydrogen which are produced by an additional high excitation frequency is effective for the fast deposition of highly crystallized nc-Si films without additional defects.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2006년도 춘계학술발표회 초록집
• /
• pp.127-127
• /
• 2006