• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.242-249
• /
• 2007

Recently, International Telecommunication Union approved several methods for objective video quality measurements to be included in international standards. These methods are mainly developed to measure quality of digital video on professional CRT monitors. In this paper, we performed subjective tests in order to examine the applicability of the standard quality assessment methods for different display monitors such as common CRT, PDP, and LCD TV monitors as well as professional CRT monitors. Subjective testing on different display monitors shows that there exist relatively high correlations between the various display monitors, which indicates the standard quality assessment methods can be used on the display monitors under the given conditions of subjective duality assessment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.871-888
• /
• 2020

With the development of display engineering and technology, the screen and sound quality of information devices such as TVs are improving. The screen used LEDs via LCD and PDP and a large flat panel in the early CRT to create super-high resolution. The sound is improved by directly vibrating a thin and simple panel, such as an OLED. In our previous study, the exciter speaker was attached to the rear of the OLED panel to be used as the diaphragm of the speaker, and the sound quality was as good as that of the TV using the existing dynamic speaker. This method supplied the viewer with the direct sound coming from the panel, delivering clear sound, and the sound and image came from the same location, thus giving the viewer high immersion and maximizing the effect of information transfer. OLED exciter speakers, however, have a special directivity, which tends to slightly attenuate the tone at the very center of the screen. This study improves the sound quality by improving the structure of the exciter speaker and the radiated sound of the flat panel display. A 2-in-1 Exciter is made into a single core to improve the speaker's radiation pattern.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.663-675
• /
• 2019

During the last decade, the dominant design of display has been LCD, and it has been led by Korean manufacturers. However, their leading positions has been recently threatened by Chinese manufacturers, Korean manufacturers are endeavoring to move toward next generation display technologies. They embarked on standards battle to win dominant design especially in the next generation display market for TVs by launching new technologies such as Quantum-dot display and OLED. While there are a number of factors of dominant design, it is expected that the technical attributes of the technology itself may be the most significant factor. For this reason, this research scrutinizes consumer preferences for technical attributes, and attempts to provide implications for standards battle in the display (for the TVs) sector. For this purpose, we employed a conjoint analysis for the preferences of potential consumers. The results show that potential consumers prefer displays with higher resolution, natural color, and durabillity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.243-246
• /
• 2004

In this paper, we have proposed the contrast control method using brightness preserving on the FPD(Flat Panel Display). The proposed algorithms consist of three blocks: the contrast enhancement, the white-level-expander, and the black-level-expander. The proposed method has employed probability density function in order to control the brightness of the image changed extremely. In order for real-time processing, we have calculated cumulative density function using the linear approximation method. The image histogram and image quality were compared with the conventional image enhancement algorithms. The proposed methods have been used in display devices that need image enhancement such as LCD TV, PDP, and FPD.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.2
• /
• pp.71-82
• /
• 2008

In this study, 3 dimensional non-linear race car vehicle model including Chassis, steering and suspension systems were modeled by using Multi-Body Dynamics Simulation Program, DADS 9.5(Dynamic Analysis and Design System),which was used in kinematic and dynamic analysis. A full race car vehicle dynamics model using DADS program was presented and analysis was carried out to estimate the handling characteristics that may be very useful to design a race car in early design stage. The simulation of vehicle handling behavior for step steering input was simulated and compared with different design parameters: torsional stiffness of the front and rear anti roll bars, the motion ratio of the front and rear suspension system, the location of the tie rod joint, in multibody dynamic model. Therefore this simulation model before race car construction in early design step will be helpful for race car designer to save time and limited budget.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.534-537
• /
• 2001

This paper deals with the active clamp ZVS flyback converter for RF generator. The proposed converter has the characteristics of the low switching noise and high efficient regarding conventional flyback converter. To verify validity of the proposed converter, the 100kHz, 48V, 300W converter are simulation and experimental result. This converter will be apply to the discharge drive circuit for PDP(Plasma Display Panel) TV.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.146-149
• /
• 2008

최근 대기전력저감기능을 갖는 PWM IC를 적용한 플라이백 컨버터는 대기전력 모드 시 Burst 스위칭 동작에 의해 소모 전력을 최소화 할 수 있지만 경 부하 및 대기전력모드 시 변압기를 통해 흐르는 큰 여자전류에 의해 여전히 낮은 효율특성을 가지는 문제점이 있었다. 본 논문에서는 경 부하 및 대기전력모드 동작 시 변압기에 흐르는 여자전류를 최소화함으로 효율을 개선한 회로를 제안하였으며 50인치 PDP TV PSU (Power Supply Unit)에 있어서 대기전력 및 보조전원으로 사용된 74W 플라이백 컨버터에 적용하여 비교 검토하여 보았다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1932-1933
• /
• 2007

본 연구에서는 sustain 펄스의 개수와 폭의 변화에 따른 sustain 방전의 휘도특성을 측정하였다. 실험을 위하여 PDP 구동실험장치에 사용하는 디지털 시스템과 고전압 펄스 driver 회로부를 개발하였다. 실험결과, 1TV-field 동안 인가되는 sustain 펄스의 개수가 증가할수록 휘도는 완만한 포화곡선을 나타내며 증가하였고 펄스의 폭이 좁아질수록 휘도가 증가하였다. 그리고 펄스폭에 대한 휘도의 증가 정도는 펄스의 개수가 증가할수록 커졌다.

• The Safety technology
• /
• no.190
• /
• pp.21-23
• /
• 2013

스테코(주)는 삼성의 최첨단 반도체 조립기술과 일본 TORAY의 베이스필름 기술의 전략적 제휴로, 1995년 설립된 LCD 구동 IC제조업체다. 응용제품으로 노트북PC, LCD, PDP TV, LCD모니터, 핸드폰 등의 액정 판넬을 구동시키는 반도체를 제조하고 있으며, LDI제품 Package 전문반도체 회사로는 세계 최고의 생산성과 기술력을 보유하고 있다는 평가를 받고 있다. 이곳은 18년의 LDI Package경험, 지속적인 연구개발 노력, 그리고 최고 수준의 품질로 비메모리 반도체 제품 분야에서는 전례를 찾기 힘든 경영성과를 달성했다. 2007년과 2008년에 국가생산성대상을 수상한 것이 이를 뒷받침한다. 이러한 기업성장의 원동력은 안전보건에서 찾을 수 있다. 2008년 산업보건 우수사례발표대회 금상, 2010년 무재해사업장 우수사례발표대회 은상, 2009년에는 제8회 대한민국안전대상에서 행정안전부장과의 영예를 안았다. 또한 그 시기 OHSAS18001 및 ISO 14001 인증도 취득하고, 최근에는 무재해 10배수라는 대기록을 달성하면서 명실상부한 최고의 아전기업을 자리 잡게 됐다. 이렇듯 스테코(주)는 빠른 시간 안에 기업반전과 안전보건이라는 두 마리 토끼를 모두 잡으면서 지역 산업현장의 모범이 되고 있는 사업장이다. 스테코(주)를 찾아가 기업발전의 토대가 되고 있는 안전보건활동이 어떻게 이뤄지고 있는지 살펴봤다.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2013

Recently Digital TV industry has drastically been moving the illuminating system, which causes an obvious product change from PDP and LCD to LED model to provide high-definition image. Due to strong competition in the digital industry, TV manufacturers make a great efforts to reduce production cost by using low-priced materials such as steels instead of aluminum and plastic etc. In this paper we have developed a new low-priced electrogalvanized steel sheet, which has a black resin composite layer, to substitute conventional high-priced PCM steel and plastic mold for rear cover panel in the digital TV. The black resin composite was prepared by mechanical dispersion of the mixture solution that consists of high solid polyester resin, melamine hardener, black pigment, micronized silica paste, polyacrylate texturing particle and miscellaneous additives. The composite solution was coated on the steel sheet using roll coater followed by induction furnace curing and cooling. Although the coated layer has a half thickness compared to the conventional PCM steels having $23{\mu}m$ thickness, it exhibits excellent quality for the usage of rear cover panel. The new steel sheet was applied to test products to get quality certification from worldwide electronic appliance customers. Detailed discussion provides in this paper including preparation of composite solution, roll coating technology, induction curing technology and quality evaluation from customers.