• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.619-624
• /
• 2007

Spectral element method (SEM) is introduced for the fully coupled structural dynamic problems, In this paper, the beam with passive constrained layered damping (PCLD) treatments is considered as a representative problems. The beam consists of a viscoelastic layer that is sandwiched between the base beam structure and an elastic layer, The fully coupled equations of motion for a PCLD beam are derived, The equations of motion are derived first by using Hamilton's principle, From this equations of motion, the spectral element is formulated for the vibration analysis by use of the SEM, As an illustrative example, a cantilevered beam is considered. It is shown that, as the thickness of VEM layer vanishes, the results become a simple layer beam's that.

• 한국음향학회지
• /
• 제28권1호
• /
• pp.25-31
• /
• 2009

본 논문에서는 수동감쇠 적층보에 대한 스펙트럴요소법을 유도하였다. 수동감쇠 적층보의 중심층인 점탄성층은 주파수에 따라 값이 변하는 복소 계수를 가지고 있다. 그래서 점탄성층의 주파수 종속적인 복소 계수를 계산하기 위하여, 스펙트럴요소법을 주파수축 상에서 파동해로부터 얻은 엄밀해를 기반으로 하는 동적형상함수를 사용하여 유도하였다. 유도된 수동감쇠 적층보에 대한 스펙트럴요소의 신뢰성과 정밀도를 검증하기 위하여 스펙트럴요소법과 유한요소법을 사용하여 구한 주파수응답함수와 동적응답을 비교하였다. 비교 결과 수동감쇠 적층보에 대한 스펙트럴요소가 유한요소에 비해서 보다 신뢰성 있는 결과를 제공하는 것을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1032-1038
• /
• 2002

The Active Constrained Layer Damping(ACLO) combines the simplicity and reliability of passive damping with the low weight and high efficiency of active control to attain high damping characteristics. The proposed ACLD treatment consists of a viscoelastic damping which is sandwiched between an active piezoelectric layer and a host structure. In this manner, the smart ACLD consists of a Passive Constrained Layer Damping(PCLD) which is augmented with an active control in response to the structural vibrations. The Arc type shell model is introduced to describe the interactions between the vibrating host structure, piezoelectric actuator and visco damping, The system is modeled by applying ARMAX model and changing a state-space form through the system identification method. An optimum control law for piezo actuator is obtain by LQR(Linear Quadratic Regulator) Method. The performance of ACLD system is determined and compared with PCLD in order to demonstrate the effectiveness of the ACLD treatment, Also, the actuation capability of a piezo actuator is examined experimentally by using various thickness of Viscoelastic Materials(VEM).

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.193-200
• /
• 2004

The Active Constrained Layer Damping(ACLD) combines the simplicity and reliability of passive damping with the low weight and high efficiency of active control to attain high damping characteristics. The proposed ACLD treatment consists of a viscoelastic damping which is sandwiched between an active piezoelectric layer and a host structure. In this manner, the smart ACLD consists of a Passive Constrained Layer Damping(PCLD) which is augmented with an active control in response to the structural vibrations. The arc type shell model is introduced to describe the interactions between the vibrating host structure, piezoelectric actuator and viscoelastic damping. The system is modeled by applying ARMAX model and changing a state-space form through the system identification method. An optimum control law for the piezo actuator is obtain by LQR(Linear Quadratic Regulator) method. The performance of the ACLD system is determined and compared with PCLD in order to demonstrate the effectiveness of the ACLD treatment. Also, the actuation capability of a piezo actuator is examined experimentally by varying thickness of viscoelastic material(VEM).

• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.387-396
• /
• 2019

This paper deals with the effect of ply orientation and control gain on tip transverse displacement of functionally graded beam layer for both active constrained layer damping (ACLD) and passive constrained layer damping (PCLD) system. The functionally graded beam is taken as host beam with a bonded viscoelastic layer in ACLD beam system. Piezoelectric fiber reinforced composite (PFRC) laminate is a constraining layer which acts as actuator through the velocity feedback control system. A finite element model has been developed to study actuation of the smart beam system. Fractional order derivative constitutive model is used for the viscoelastic constitutive equation. The control voltage required for ACLD treatment for various symmetric ply stacking sequences is highest in case of longitudinal orientation of fibers of PFRC laminate over other ply stacking sequences. Performance of symmetric and anti-symmetric ply laminates on damping characteristics has been investigated for smart beam system using time and frequency response plots. Symmetric and anti-symmetric ply laminates significantly reduce the amplitude of the vibration over the longitudinal orientation of fibers of PFRC laminate. The analysis reveals that the PFRC laminate can be used effectively for developing very light weight smart structures.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권1호
• /
• pp.37-42
• /
• 2003

Active control of flexural vibrations of smart laminated composite beams has been carried out using piezoceramic sensor/actuator and viscoelastic material. The beams with passive constrained layer damping have been analyzed by formulating the equations of motion through the use of extended Hamilton's principle. The dynamic characteristics such as damping ratio and modal damping of the beam are calculated for various fiber orientations by means of iterative complex eigensolution method. This paper addresses a design strategy of laminated composite under flexural vibrations to design structure with maximum possible damping capacity.

• 한국보건간호학회지
• /
• 제31권2호
• /
• pp.257-271
• /
• 2017

Purpose: The hepatitis B virus is a major cause of chronic liver disease. The clinical guidelines recommend that inactive chronic hepatitis (ICH) patients also check their liver function every 6 to 12 months and manage the potential risks. This study compared the hepatitis B knowledge, self-care practice, and quality of life in patients with HBV according to the disease activity. Methods: This study was conducted in a university hospital and surveyed on 65 ICH patients and 68 progressive chronic liver disease (PCLD) patients from November in 2012 to September in 2013. Results: The knowledge of hepatitis B was lower in the group of a lately perceived HBV infection and ICH. Self-care practice was lower in the male and the patients group with a perceived HBV infection within 5 years. The "taking regular liver function test" score was lower in the ICH. Eight out of 12 Liver Disease Quality of Life instrument (LDQOL) subscales were lower in PCLD. Conclusion: The hepatitis B knowledge and self-care practice are relatively lacking in ICH and the patients group with a perceived HBV infection within 5 years. More effective education programs will be necessary to enhance the hepatitis B knowledge and self-care for patients with HBV and even for ICH.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.950-955
• /
• 2002

The coupled finite/boundary element method is used in numerical analysis for acoustic radiation from the vibration of rectangular composite plate which is simply supported. This analysis is validated using the Wallace equation for an isotropic plate. Active control of sound fields has been tarried out using 3 pairs of piezoelectric sensor/actuator and a pair of viscoelastic material by Passive constrained layer damping treatment. The results show that the optimal placement of piezoelectric sensor/actuator and VE patch is required to control the sound fields from a vibrating composite plate.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.964-969
• /
• 2002

The flexural vibration of laminated composite beams with passive constrained layer damping has been investigated to design structure with maximum possible damping capacity. The equations of motion are derived for flexural vibrations of symmetrical, multi-layer laminated beams. The damping ratio and modal damping of the first bending mode are calculated by means of Iterative complex eigensolution method. This paper addresses a design strategy of laminated composite under flexural vibrations.

• 폴리머
• /
• 제35권4호
• /
• pp.320-324
• /
• 2011

폴리카프로락톤디올을 디이소시아네이트와 반응하여 우레탄 아크릴레이트를 합성하였고 부틸 아크릴레이트 혹은 부착증진제를 배합하여 그 물성을 조사하였다. 이소포론 디이소시아네이트를 사용한 자외선 경화형 수지에 부틸 아크릴레이트를 일정성분비로 첨가하여 경화 시 수축현상 개선의 정도를 조사해 본 결과 부틸 아크릴레이트의 함량이 15 wt%일 때가 가장 좋은 물성을 발현하였다. 자외선 경화형 수지의 부착력을 증진시키기 위해 2-에틸 헥실 아크릴레이트와 에틸 아크릴레이트를 $85^{\circ}C$에서 4시간동안 합성하여 부착증진제를 얻었으며 이를 자외선 경화형 수지에 일정성분비로 첨가하여 물성을 확인해 보았다. 부착증진제의 함량이 높아질수록 부착력이 증가하였지만 15 wt% 이후로는 연성의 성질이 지나치게 강하여 오히려 부착력이 감소함을 확인할 수 있었다.