• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.113-118
• /
• 2011

According to the high accuracy of semiconductor equipments, PCB substrate with much thin thickness is required. However, it is very difficult to sustain the PCB substrate without deformation in case of horizontal installation, due to low bending stiffness. In this research, new PCB process equipment with vertical installation has been developed in order to solve the problem of PCB substrate damage during etching process. As the main parts of etching system on PCB substrate, PCB substrate and JIG are analyzed through finite element method and experimental test. Through the analysis results of stress state, we could find the optimal JIG design to make the damage as low as possible.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.12
• /
• pp.1533-1540
• /
• 2001

In this paper, we described extraction method of electrical parameters and modeling method of PCB nets on PCB design process. To analyze electrical characteristics of real PCB structure, we selected a cache memory system as an experimental board and designed 6 layer PCB substrate. For extraction of the electrical parameters, we divided circuit elements into the components of conductor types which are wires, via holes, BGA balls etc. and combined the calculated value by real net structure to modeling the PCB nets. We analyzed the electrical characteristics of the PCB nets with the simulation tools of SPICE and XNS. The simulation analysis has shown that the maximum signal delay was 2.6ns and the maximum crosstalk noise was 281 mV and we found that the designed substrate was adequate to system specification.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.8
• /
• pp.1219-1226
• /
• 2013

This study is the analysis and verification process of the L-band satellite communications repeater thought PCB & circuit EM analysis. System performance can be vulnerable to various spurious inside the L-band satellite transponder, power conversion board, digital signal board, TM/TC board, such as control panels and blocks that are linked signal components when the winch is increased due to the noise component. So the whole system can cause performance degradation. PCB resonance analysis and EM simulation can be easily analyzed for a variety of optimal. Also, by setting the ports on the PCB, H/W designer wants to can easily analyze system.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.88-95
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand fur high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The geometrical relationship between PCB, cameras, and xy$\theta$ stage is derived, and analytical equations for alignment errors are also obtained. The unknown parameters including camera declining angles and etc. can be obtained by initialization process. Finally, the proposed algorithm is verified by experiments by using test bench.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2335-2338
• /
• 2003

This paper presents a real-time PCB (Printed Circuit Board) vision inspection system. This system can detect the OPEN and SHORT of the PCB which of the line width is 150$\mu\textrm{m}$. Our PCB inspection system is based on the referential method. Since the size of the captured PCB image is very large, the image is divided into 512${\times}$512 images to apply the accurate alignment efficiently. To correct the misalignment between the reference image and the inspection image, pattern matching is performed. In order to implement the proposed algorithm in real-time, we use the SIMD instruction and the double buffering structures. Our experiential results show the effectiveness of the developed inspection algorithm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.664-670
• /
• 2018

In modern society, CCTV, which is the eye of surveillance, is being used to collect image data in various ways in daily life. CCTV is used not only for security, surveillance, and crime prevention but also in many fields such as automobile and black box. In this paper, we have developed a STM32F407 ARM chip based camera system for various applications. In order to develop camera system, modeling of camera system based on 3D structure was carried out in SolidWorks environment. The PCB board design was developed to extract the PCB parts from the camera system modeling files into iges files, convert them from the Altium Designer tool into 3D and 2D boards, After designing the camera system circuit and PCB, we have been studying the implementation of the stable system by using TRM (Thermal Risk Management) tool to cope with the heat simulation generated on the board.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.10
• /
• pp.1170-1176
• /
• 2001

Objective : The purpose of the study was to evaluate the clinical and radiological results after discectomy and Lubboc bone graft in the surgical management of the cervical diseases with a new titanium interbody implant and integrated screw fixation(PCB) by anterior approach. Methods : The authors retrospectively analyzed 28 cases of anterior cervical fusion with PCB system and Lubboc bone(xeno graft) from september 1998 to december 2000. Twenty-eight patients with cervical diseases underwent decompression cervical lesion and followed from 5 to 27 months with a mean follow-up of 14 months. There patients were evaluated with clinically and radiologically at immediate postoperative period and at 3, 6, 9, and 12 months. Result : The authors investigated the pre- and postoperative intervertebral disc space, clinical outcomes, radiography fusion rate, and Cobb angle in the fixed segments by anterior approach. The lordotic angles and height of disc space were increased after the operation. The clinical outcome of patients follow-up was good or excellent result based on Odom's criteria with improvement of clinical symptom in about 92.9% of the cervical diseases. Two patients showed loosening of the lower and upper cervical screw of PCB instruments, and two patients showed swallowing difficulty and wound infection Conclusion : The PCB system is a new implant for anterior cervical interbody fusion in the degenerative cervical disease and disc herniations. It provides immediate stability and segment distraction. The results of this study indicate that the PCB system is safe, easy handling of hardware, less complications, high fusion rate, and has provide the keeping the intervertebral disc space height and lordotic angles.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.109-112
• /
• 1996

The more integrated and smaller SMD are needed, new solder joints packaging technologies are developed in these days such as BGA(Ball Grid Array), Flip Chip, J-lead etc. But, it's unable to inspect solder joints in those devices by visual inspection methods, because they are hided by it's packages. To inspect those new SMD packages, an X-ray system for acquiring a cross-sectional image of a arbitrary plane is necessary. In this paper, an analysis for designing X-ray cross sectional imaging system is presented including the way for correcting the distortion of image intensifier. And we show computer simulation of that system with a simple PCB model to show it's usefulness in applying PCB solder joint inspection.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.882-885
• /
• 2018

Recently, signal integrity on PCB (printed circuit board) becomes very important as the system operation speed increases. So far, PCB is customarily designed to minimize area and cost. However, ultra-high-speed PCB often fail to operate properly, unless it is precisely and carefully designed considering dielectric characteristics, line width, line spacing, and impedance matching. This paper surveys many problems in ultra-high-speed PCB and various design methods to mitigate them.

• The KIPS Transactions:PartA
• /
• v.8A no.3
• /
• pp.269-278
• /
• 2001

Routing region modeling method of auto_routing systems are use the grid and the non-grid type. Though grid type has a few electrical and physical element on PCB, grid type has disadvantage which decrease the auto-routing speed dur to constraint with board and gird size. Thus it increase the memory capacity, Non-grid type(Shape baed type) use the region processing type, so it has 44.2% memory decrease effect than grid type in routing region. Thus, via number has 55% decrease effect, total routing time is increased 83.8% than conventional PCB system. In this paper we developed high speed PCB auto-routing system without memory waste by using shaped type applicant with auction algorithm which reaching the destination from one-point with best speed and solving the path problem. Also, this system developed by Visual C++ in IBM Pentium computer Window environment, and compatible with other PC.