• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.15-20
• /
• 2005

This paper describes the PCB drilling using an ultra high-speed air bearing spindle system and micro drill. For this research, we have developed the ultra high-speed air bearing spindle of 125,000 rpm and made an experiment for the application possibility in the PCB drilling. In order to estimate the drilling performance, we have investigated the size and damage of drilled hole, and the wear of drill at 90,000rpm. Results are as follows; we have confirmed the possibility in the PCB drilling of air bearing spindle. In case of micro-drilling PCB at $0.1mm\sim0.3mm$, the increase in the number of drilling has resulted in a bigger size of holes and also a bigger size of damage. It has been found that the wear of micro drill tends to concentrate in the main cutting edge.

• 한국산학기술학회논문지
• /
• 제6권5호
• /
• pp.412-417
• /
• 2005

본 논문에서는 PCB의 제작 공정에 있어 기준구멍을 가공하기 위한 다축드릴머신의 PCB와 드릴날 간의 충돌시 힘을 구하여 설계에 반영한다 이는 PCB 가공을 대량생산에 적합하고 정확성을 높이기 위해 PCB용 다축드릴머신을 설계함에 있어 해석결과를 이용하여 안전성확보와 제작단가를 절감할 수 있다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.206-208
• /
• 2008

Implantation of metals and ceramics with ions of nitrogen and other species has improved surface properties such as friction, wear and corrosion in numerous industrial applications. In recent years, PCB drills tend to be more minimized increasingly as the electronics components have been more highly accumulated and minimized. Therefore nitrogen ion implantation was performed onto PCB drill (0.15 & 0.3 mm in diameter), in order to investigate mechanical properties of WC-Co cermets surface through Nano-indentation tests. PCB drill was implanted at energy of 70 keV, 90 keV, 120 keV and with the dose range of $1{\times}10^{17}$ and $5{\times}10^{17}\;ions/cm^{2}$. After ion implantation, WC-Co PCB drill bits was tested in actual operating situation to apply cutting tools industry and is concluded that the life time of nitrogen ion implanted PCB drills is one and a half times longer than the unimplanted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1009-1010
• /
• 2011

• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.94-98
• /
• 2023

In the case of high-speed data transmission on high multilayer boards, signal coherence is a problem, especially due to the via hole, and a solution to improve return loss or insertion loss by applying a back drill to the via hole is being proposed. In this paper, Near-Field Electromagnetic measurements were made on a high multilayer board to determine how the presence or absence of back drill affects signal consistency. For this purpose, we used a signal generator, spectrum analyzer, and EMC scanner on a test board to determine if it is possible to distinguish between areas with and without back drill in the via holes of the stubs on the board. Also, we analyzed the measured value of S11, S21 and EMC etc. for how much it improves the signal attenuation of the stub with back drill. Through this, we knew that less electromagnetic waves are generated the stub via with back drill. At future research, we will analyze how much it improves the signal loss and electromagnetic waves due to the depth of back drill.

• 산업공학
• /
• 제10권1호
• /
• pp.223-235
• /
• 1997

The process of determining the optimal tool path in PCB(printed circuit board) drilling operations is identical with that of solving a TSP(traveling salesman problem). However, the optimal solution will be ruined when a drill bit needs tracking back in its tool paths. The back tracking occurrences shorten a life of the main spindle and result in inaccurate mechanical movements. In this study, the performances of four heuristics(Nearest Neighbor, Convex Hull, Greatest Angle and Most Eccentric Ellipse) are evaluated to obtain feasible tool paths along with less number of back trackings for a large number of holes(more than 2000holes/bit) and to generate corresponding NC codes for a given CNC drill. Also, the operations of these algorithms are visualized to show a user the graphic image of tool visitation with PCB holes on a computer screen.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 춘계학술발표회 초록집
• /
• pp.3-3
• /
• 2001

Recently TiN, TiAlN, CrN hardcoatings have adapted many industrial application such as die, mold and cutting tools because of good wear resistant and thermal stability. However, in terms of high speed process, general hard coatings have been limited by oxidation and thermal hardness drop. Especially in the case of PCB drill, high speed cutting and without lubricant process condition have not adapted these coatings until now. Therefore more recently, superhard nanocomposite coating which have superhard and good thermal stability have developed. In previous works, WC-TiAlN new nanocomposite film was investigated by cathodic arc ion plating system. Control of AI concentration, WC-TiAlN multi layer composite coating with controlled microstructure was carried out and provides additional enhancement of mechanical properties as well as oxidation resistance at elevated temperature. It is noted that microhardness ofWC-TiA1N multi layer composite coating increased up to 50 Gpa and got thermal stability about $900^{\circ}C$. In this study WC-TiAlN nanocomposite coating was deposited on PCB drill for enhancement of life time. The parameter was A1 concentration and plasma cleaning time for edge sharpness maintaining. The characteristic of WC-TiAlN film formation and wear behaviors are discussed with data from AlES, XRD, EDS and SEM analysis. Through field test, enhancement of life time for PCB drill was measured.

• 융합신호처리학회논문지
• /
• 제16권3호
• /
• pp.90-95
• /
• 2015

본 연구에서는 인쇄회로 기판(PCB)의 홀 가공에 사용되는 초소형 및 경량의 마이크로 드릴비트를 검사하기 위한 방법을 제안하고 있다. 고배율의 현미경을 통해 마이크로 드릴 비트의 영상을 획득한 후 드릴비트의 주요 지점들을 검출하는 영상처리 알고리즘을 개발하였고 주요지점을 근거로 하여 드릴비트의 다양한 요소들을 측정하였다. 또한, 드릴비트의 정상 및 비정상 상태를 자동으로 분별할 수 있는 윈도우 기반 검사 시스템을 개발하였다. 본 연구에서 개발한 시스템의 상대적인 성능비교를 위해 시험영상들을 사용하여 기존 검사장비와 비교하였다. 실험결과에 의하면 제안된 시스템은 기존 검사기보다 성능을 조금 향상시켰으며 기존 시스템에서 발생된 오판단된 일부 에러를 정확하게 분류하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2005년도 춘계학술발표논문집
• /
• pp.79-82
• /
• 2005

본 논문에서는 PCB의 제작 공정에 있어 기준구멍을 가공하기 위한 다축드릴머신의 PCB와 드릴날 간의 충돌시험을 구하여 설계에 반영한다. 이는 PCB 가공을 대량생산에 적합하고 정확성을 높이기 위해 PCB용 다축드릴 머신을 설계함에 있어 해석결과를 이용하여 안전성확보와 제작단가를 절감할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1853-1856
• /
• 2003

Multi-layer printed circuit board(PCB) is being used widely for the product with relatively complex circuits such as TV, VTR and FAX. With the rapid enlargement of electronic and IT industry, the hole machining technology on multi-layer PCB is increasingly required to improve. Thus, the micro drilling with ultrasonic vibration can be a good method for hole machining. Unlike conventional drilling, ultrasonic vibration applied drilling introduces less wear and fracture of not only tool but also internal surface of workpiece due to little cutting resistance, thus, machinability can be improved. The experiment is conducted through the comparison between the results of conventional drilling and ultrasonic micro drilling as well as among each results by the variation according to not only feed rate of drill but also amplitude and frequency of ultrasonic vibration. The multi-layer PCB consists of 6 layers and ${\Phi}$0.3 diameter drill was used. As a result, it was found that the state of internal surfaces of holes on multiple layer PCBs is improved by the application of ultrasonic vibration.