Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the PCB(Printed Circuit Board) Drilling by Air Bearing Spindle

공기 베어링 스핀들을 애용한 PCB 드릴링에 관한 연구

  • 배명일 (충남대학교 공과대학 기계공학과) ;
  • 김상진 (충남대학교 대학원 기계공학과) ;
  • 김기수 (충남대학교 공과대학 기술교육과)
  • Published : 2005.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the PCB drilling using an ultra high-speed air bearing spindle system and micro drill. For this research, we have developed the ultra high-speed air bearing spindle of 125,000 rpm and made an experiment for the application possibility in the PCB drilling. In order to estimate the drilling performance, we have investigated the size and damage of drilled hole, and the wear of drill at 90,000rpm. Results are as follows; we have confirmed the possibility in the PCB drilling of air bearing spindle. In case of micro-drilling PCB at $0.1mm\sim0.3mm$, the increase in the number of drilling has resulted in a bigger size of holes and also a bigger size of damage. It has been found that the wear of micro drill tends to concentrate in the main cutting edge.

Keywords

References

  1. Lee, J. H, 'The Change of PCB manufacturing technology,' The magazine of IEEK, Vol. 21, No.8, pp. 39-47, 19940
  2. Cheong, M. S., Cho, D. W., Kernel, F. Ehmann., 'Identification and control for micro-drilling productivity enhancement,' Int Journal of Machine Tools & Manufacture, Vol. 39, pp. 1539-1561, 1999 https://doi.org/10.1016/S0890-6955(99)00019-X
  3. Frank, L., 'Wear and cutting performance of coated. micro drills,' Surface & Coatings Technology, Vol. 107, pp. 191-196, 1998 https://doi.org/10.1016/S0257-8972(98)00681-1
  4. Ogawa, K, Aoyama, E., Inoue, H, Hirogaki, T., Nobe, H, Kitahara, Y., Katayama, T. & Gunjima, M, 'Investigation on cutting mechanism in small diameter drilling for GFRP(thrust force and surface roughness at drilled hole wall),' Composite Structure, Vol. 38, No. 1-4, pp. 343-350, 1997 https://doi.org/10.1016/S0263-8223(97)00069-X
  5. Inoue, H., Aoyama, E., Rirogaki, T., Ogawa, K., Matushita, H, Kitahara, Y. & Katayama, T., 'Influence of tool waer on internal damage in small diameter drilling in GFRP,' Composite Structure, Vol. 39, No. 1-2, pp. 55-62, 1997 https://doi.org/10.1016/S0263-8223(97)00068-8