• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.175-180
• /
• 2002

"Samsung Composite Shear Wall System" has its basis on "Samung Able System". "Samsung Able System" has some problems not only in the connection structure but also in waterproofing and soundproofing. We developed "Samsung Composite Shear Wall System" in order to solve these matters and expand PC system. "Samsung Composite Shear Wall System" is the compromise and complement of all the merits of full PC, half PC and in-situ concrete system.

• 한국건축시공학회지
• /
• 제3권1호
• /
• pp.93-105
• /
• 2003

The Precast Concrete(PC) method was developed for a large production of a structure in Europe. Afterwards, this PC method has been applied to a structure and an outside Coating of buildings extensively. The outside Coating of the building applied this PC method is a method to put tiles or stones to base concrete. And there is a method to use paints for, so the expression of various patterns is possible. The Multi-Layer Coating is one of the methods to use paints. This Multi-Layer Coating method can show various designs of external appearance with Foam when it is made with the PC panel. Also, the paint film of the PC panel enables a splendid appearance, and a protective function of concrete is possible, too. Therefore, it makes good durability of the PC. Besides, maintenance is easy to manage because it is free from pollution when it uses metallic materials, stones, or any other materials. You might have no trouble in applying the Multi-Layer Coating method in order to save a merit of an outside Coating on the PC panel. However, the Multi-Layer Coating method used as a current outside Coating method has pollution and bad working environment because Oil Epoxy Resins have toxicity and flammability. Therefore, a lot of warnings are required for coating work in order to have appropriate quality because working hours are short, and production efficiency is low too. These reasons make the cost of construction of the Multi-Layer Coating method increase. And employers or designers may have problems in selecting this Multi-Layer Coating method. Therefore, the purpose of this study is to get activation of the Multi-Layer Coating method by offering improvement measures about the problems of the existing Multi-Layer Coating method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.157-158
• /
• 2021

Recently, there have been a growing number of cases using precast concrete construction methods to efficiently carry out construction projects. In order to efficiently carry out PC construction, it is necessary to establish a production plan of PC components that effectively reflect various design alternatives during the initial design stage. Because the production plan of PC components is based on productivity of PC members, the use of PC production simulations that can effectively predict productivity for design alternatives is necessary. Therefore, this paper propose a method to efficiently generate design alternatives which is necessary to perform to production simulations using parametric modeling techniques and BIM.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권6호
• /
• pp.166-174
• /
• 2011

본 연구는 PC 작은 보의 댑단부와 PC 큰 보의 레져에 대한 전단성능을 평가하기 위한 전단 구조성능 실험연구이다. 일반적으로 작은 보의 댑단부와 큰 보의 레져는 사용하중에 안전하도록 설계하고 있지만, 작은 보의 단부를 연속단으로 설계한다면 작은보의 댑단부와 큰 보의 레져는 고정하중과 시공하중에만 안전하도록 설계할 수 있다. 이에 대한 구조성능을 평가하기 위하여 행거철근 정착방법, 설계하중, 레져보강근유무를 변수로 총 7개 실험체를 제작하여 전단실험을 실시하였다. 실험결과, 댑단부 및 레져가 으로 설계되어도 작은 보의 연속성은 확보될 수 있는 것으로 나타났으며, 전단 임계단면은 지지점으로부터 유효높이(d)만큼 떨어진 위치에서 형성된 후 댑단부로 진전되었다. 그리고 PCI 핸드북에서 레져를 설계할 때 캔틸레버 슬래브와 같은 구조일 때로 해석하고 있는데, 본 공법에서의 레져는 3변 고정 슬래브와 같은 구조이므로 PCI 핸드북에서 정의하는 방법은 본 공법의 레져를 과대설계할 가능성이 있는 것으로 사료된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권1호
• /
• pp.140-148
• /
• 2012

최근 PC 공법을 도입하려는 시도가 많이 이루어지고 있다. 그러나 PC 벽체에 대한 연구는 개발의 어려움이 있어 상대적으로 더디게 발전되어 왔다. 본 연구에서는 PC벽체의 기존의 접합부의 시공성 및 구조성능을 개선하기 위하여 수직접합부의 개선안을 개발하였고, 이에 대한 구조성능평가를 진행하였다. 제안된 PC벽체의 수직접합부 구조적인 성능을 검증하기 위하여 반복적인 횡하중 재하시험을 진행한 결과, 기존의 일체형 PC벽체와 동등이상의 내진성능을 발휘하는 것으로 나타나 향후 구조물의 주요 횡력저항요소로 충분히 적용가능할 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.34-37
• /
• 2004

In the present research, a ultra-precision diamond cutting of thermo-plastic materials, polycarbonate (PC) and cyclic olefin polymer (COC), is carried out by applying a method named ultrasonic elliptical vibration cutting developed by the authors. It is experimentally proved that good optical surfaces are obtained by applying the elliptical vibration cutting in cases of machining of flat surfaces and grooves as compared with the conventional diamond cutting. The maximum surface roughness in peak to valley value obtained is less than 60 nm and 20 nm for PC and ZEONEX, respectively.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.84-88
• /
• 2002

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.87-88
• /
• 2023

In accordance with changes in the domestic construction environment, interest in off-site construction methods (factory-manufactured construction methods) including modular construction methods is rapidly increasing. Among various off-site (OSC) construction methods, the front runner is the steel-based box-type modular construction method. Compared to the existing wet construction method, the steel modular construction method is increasing in terms of securing economic feasibility by shortening the construction period and increasing the prefabrication rate. However, due to the recent rise in raw materials and a sharp rise in the exchange rate, the economic feasibility of the wet method is deteriorating compared to the wet method. Therefore, a hybrid between 9-Matrix-based OSC construction methods is considered as a solution, away from the steel-box type combination, and a comparative study of the construction process between each construction method is being conducted. It was analyzed that the PC modular construction method shortened the construction period by 9% compared to the existing steel modular construction method. On the other hand, when comparing the construction period of the Gayang-dong demonstration complex calculated assuming that all modules are applied, it is estimated that there will be a 12% reduction in construction period compared to the steel modular method and a whopping 43% compared to the RC method.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.215-225
• /
• 2011

일반적으로 프리캐스트 교각은 공장에서 모든 제품을 생산하여 품질의 균질성을 확보할 수 있으며, 고강도 콘크리트를 사용할 수 있어 중공 형태로 블록을 제작할 수 있어 사하중 절감효과가 발생한다. 이러한 프리캐스트 교각 공법은 미국 일본 등에서 이미 실용화하여 적용되고 있는 공법으로 주로 PC 긴장재를 사용한 블록간의 연결에 의해 이루어지고 있다. 하지만, PC 긴장재를 사용하게 되면 과다한 초기 공사비가 소요되어 비경제적 시공이 불가피하다. 본 연구의 목적은 공기 단축과 초기 공사비를 절감하기 위해 PC 긴장재를 사용하지 않고, 슬리브와 일반 철근만으로 구성된 경제적이면서 시공성이 우수한 프리캐스트 교각 공법 개발에 있다. 이를 위해 본 연구에서는 신형식 철근이음 장치인 그라우팅형(形) 슬리브를 이용한 프리캐스트 교각 단면에 대하여 중공율, 주철근 직경, 단면 크기 등을 변수로 총 5개의 축소모형에 대하여 실험적으로 성능을 평가하였으며, 스케일 효과가 배제된 상태에서의 현장 적용성을 살펴보기 위해 최종적으로 성능을 검토하기 위하여 대형모형실험을 통해 교각의 성능을 검증하였다.

• 한국주거학회논문집
• /
• 제26권2호
• /
• pp.103-110
• /
• 2015

Precast Concrete (PC) construction method can be the one that is suitable for long-life housing due to its merit in respect of maintenance and durability based on crack-free from mass production with indirect construction cost-saving-effect due to shortening construction period comparing to the conventional construction method, but it has the problem that causes the raise of direction construction costs. So, this study analyzed its economic feasibility of PC method whose maintenance and durability are excellent for underground parking lot of apartment house for accomplishing cost-saving long-life housing by applying the various structural system. In evaluation of unit module structural system, two-way PC system requires 10 to 28% more costs for frame work than RC rigid frames, and, one-way PC system 98~112%. Although it varies depending on the method, the costs are similar to RC rigid frame structure, provided a proper method is adopted. Also, Model 11, which was most economical in the evaluation, was applied to an real parking lot and about 2 to 6% of construction costs was reduced than RC rigid frames. This seems to be because, although PC system has a higher production cost, introduction of P.S (prestress) reduces member depth and, therefore, height, as well as the number of members per unit module.