• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.424-429
• /
• 1998

Cloud-point data at $230^{\circ}C$ and 1,800 bar are presented for two poly(ethylene-co-vinyl alcohol)(PEVA) copolymers[9.9mol% and 17.8mol% vinyl alcohol(VA)] in ethylene, propane, propylene, n-butane, 1-butene, dimethyl ether(DME), and chlorodifluromethane(CDFM). The static type experimental apparatus with a view cell has been used for the experiment at the high pressure and temperature. The pressure-temperature (P-T) loops of PEVA(9.9mol% VA) copolymer-DME mixtures are presented at copolymer concentrations of 1.4wt% to 20.0wt%. Also, we presented the phase behavior of PEVA(17.8mol% VA) copolymer-DME system at copolymer concentration of 1.9wt% to 6.8wt%. The cloud-point curves for the PEVA copolymers in dimethyl ether showed single phase above 480 bar as a result of the hydrogen bonding between the vinyl alcohol unit and dimethyl ether. The pressure-concentration(P-x) isotherm loops of PEVA(9.9mol% and 17.8mol% VA)-DME system are obtained. The cloud-point curves for PEVA(9.9mol% and 17.8 mol% VA) copolymers andthe ethylene, propane, propylene, n-butane, 1-butene, and CDFM all show negative slopes of phase behavior and are located at pressures below 1,800 bar. For PEVA copolymer-DME system(9.9mol% VA), cloud-point curves show positive slopes that decrease in pressures with decrease in temperature in the temperature range of $80^{\circ}C$ to $160^{\circ}C$.

• Membrane Journal
• /
• v.24 no.6
• /
• pp.417-422
• /
• 2014

The poly(ethylene oxide) (PEO)/Ag Nanoparticles (NPs)/7,7,8,8-Tetracyanoquinodimethane (TCNQ) membrane was fabricated to obtain highly permeable facilitated olefin transport nanocomposite membrane, compared with PEO/Ag NPs/p-Benzoquinone (p-BQ) membrane. Polymer matrix, PEO and silver nanoparticle precursor $AgBF_4$ were fixed at 1 : 0.4 mole ratio and electron acceptor TCNQ content was controlled variously. And the best olefin separation performance was obtained at 1/0.4/0.004 mole ratio, and long-term separation performance was measured at this ratio. As a result, mixed-gas permeance decreased from 23 to 6 GPU, and selectivity decreased from 6 to 2 (propylene/propane) after 32 hours.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.1
• /
• pp.6-9
• /
• 2001

[ $SiO_2$ ] effect on the electrochemical properties of polymeric gel electrolytes(PGEs) reinforced with glass fiber cloth(GFC) was investigated . PGEs were composed of polyacrylronitrile(PAN), poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)), $LiClO_4$ and three kind of plasticizer(ethylene carbonate, dietyl carbonate, propylene carbonate). $SiO_2$ was added to PGEs in the weight fraction of 10, 20, $30\%$ respectively. PGEs containing $SiO_2$ showed conductivity of over $10^{-3}S/cm\;at\;23^{\circ}C$ and electrochemical stability window to 4.8V. In the impedance spectra of the cells, which were constructed by lithium metals as electrodes, interfacial resistance increased due to growth of passivation layer during storage time and remarkable difference was not observed with content of $SiO_2$. In the impedance spectra of the lithium ion polymer batteries consisted of $LiClO_2$ and mesophase pitch-based carbon fiber(MCF), ohmic cell resistance of $SiO_2-free$ PGE was changed continuously with number of cycle, but those of $SiO_2-dispersed$ PGEs were not. Discharge capacity of the PGE containing $20wt\%\;SiO_2$ showed 132 mAh/g at 0.2C rate and $85\%$ of discharge capacity was retained at 2C rate.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.107-107
• /
• 2017

3D bioprinting is a technology to produce complex tissue constructs through printing living cells with hydrogel in a layer-by-layer process. To produce more stable 3D cell-laden structures, various materials have been developed such as alginate, fibrin and gelatin. However, most of these hydrogels are chemically bound using crosslinkers which can cause some problems in cytotoxicity and cell viability. On the other hand, thermosensitive hydrogels are physically cross-linked by non-covalent interaction without crosslinker, facilitating stable cytotoxicity and cell viability. The examples of currently reported thermosensitive hydrogels are poly(ethylene glycol)/poly(propylene glycol)/poly(ethylene glycol) (PEG-PPG-PEG) and poly(ethylene glycol)/poly(lactic acid-co-glycolic acid) (PEG/PLGA). Chitosan, which have been widely used in tissue engineering due to its biocompatibility and osteoconductivity, can be used as thermosensitive hydrogels. However, despite the many advantages, chitosan hydrogel has not yet been used as a bioink. The purpose of this study was to develop a bioink by chitosan hydrogel for 3D bioprinting and to evaluate the suitability and potential ability of the developed chitosan hydrogel as a bioink. To prepare the chitosan hydrogel solution, ${\beta}-glycerolphosphate$ solution was added to the chitosan solution at the final pH ranged from 6.9 to 7.1. Gelation time decreased exponentially with increasing temperature. Scanning electron microscopy (SEM) image showed that chitosan hydrogel had irregular porous structure. From the water soluble tetrazolium salt (WST) and live and dead assay data, it was proven that there was no significant cytotoxicity and that cells were well dispersed. The chitosan hydrogel was well printed under temperature-controlled condition, and cells were well laden inside gel. The cytotoxicity of laden cells was evaluated by live and dead assay. In conclusion, chitosan bioink can be a candidate for 3D bioprinting.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.73-80
• /
• 2006

Sulfonated poly(ethylene glycol) (PEG-$SO_{3}$) grafted polyrotaxanes (PRx-PEG-$SO_{3}$) were prepared in order to utilize the unique properties of PEG-$SO_{3}$ and the supramolecular structure of PRx, in which PEG-$SO_{3}$ grafted $\alpha$-cyclodextrins ($\alpha$-CDs) were threaded onto PEG segments in a PEG-b-poly(propylene glycol) (PPG)-b-PEG triblock copolymer (Pluronic) chain capped with bulky end groups. Some of the PRx-PEG-$SO_{3}$ demonstrated a higher anticoagulant activity in case of PRx-PEG-$SO_{3}$ (P 105), and compared with the control they showed a lower fibrinogen adsorption in PRx-PEG-$SO_{3}$ (F68) and a higher binding affinity with fibroblast growth factor. The obtained results suggested that polyrotaxane incorporated with PEG-$SO_{3}$ may be applicable to the surface modification of clinically used polymers, especially for blood/cell compatible medical devices.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.196-196
• /
• 1994

DDS에 활용될 수 있는 고분자 소재를 개발할 목적으로 물성 및 응용성이 우수한 고분자 겔에 관한 연구를 수행하였다. Ethylene oxide,propylene oxide 각각의 copolymer인 poloxamer등의 prepolymer들을 triisocyanate로 가교시키고 diisocyanate 로 chain이 연장된 "soft hydrogel"을 제조하였다. 모델 약물을 선정하여 crosslinker와 extender의 조절에 따른 hydrogel의 약물 방출 조절능을 조사하였으며 그 기전을 규명하고자 하였다. 가교부위에 urethane bond를 함유한 soft hydtogel은 건조상태에서도 고무와 같은 전연성을 보여 일반적인 hydrogel과 대비되는 특성을 보였으며 이에 따른 다양한 활용성이 기대되었다. Extender및 crosslinker의 비율에 따라서 이 rubber elasticity가 조절되었다. 가교도가 감소할수록 팽윤도가 상승하였고 이에 따른 약물방출도 증가함을 확인하였다. 또한 Prepolymer의 분자량 및 친수/소수성등의 물성에 따라 약물방출을 조절할 수 있었다. 제조된 hydrogel에 조절방출시 필요한 기능을 부가시키고자 poly(carylic acid)류와 IPN 공중합체를 합성하여 물성을 조사하였고 비이온성/양이온성/음이온성 모델약물을 선정하여 pH에 따른 가변적 팽윤도와 이온성 상호작용등에 근거한 약물 조절방출기전을 조사하였다.기전을 조사하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.199-199
• /
• 2011

The addition of a carbanion to ${\yen}{\acute{a}}{\yen}{\hat{a}}$-unsaturated carbonyl compounds is of importance in the C-C bond formation reactions for modern pharmaceuticals and organic synthesis. Recently, heterogeneous asymmetric catalysis became more attractive area of research because of the easy recovery and separation of the catalyst from the reaction system. Most of synthetic methods for heterogeneous catalysts were grafting or immobilization of homogeneous catalyst onto the solid supports. Trans-1,2-Diaminocyclohexane(DACH) and L-proline ligands have been enormously used as chiral ligands in several catalytic transformation under homogenous conditions. Our group prepared l-proline functionalized mesoporous silica was synthesized under acidic condition using a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer template (EO20PO70EO20, Pluronic P-123, BASF). Furthermore, we successfully directly synthesized trans-1,2 diaminocyclohexane functionalized mesoporous silica by using microwave method. The direct functionalization of chiral ligand into the framework of mesoporous materials is expected to be useful for the heterogeneous asymmetric catalysis. So, we adopt the direct synthesis of chiral ligand functionalized mesoporous silica by using thermal and microwave irradiation. Then, chiral ligand functionalized mesoporous silicas were applied to enantioselective asymmetric catalytic reactions.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.536-541
• /
• 2003

Unsaturated poly(3-hydroxyalkanoate) (UPHA) was biosynthesized and the properties of drug delivery using the polymer matrix were investigated. The biosynthesis of UPHA was carried out by pH-stat fed batch fermentation of Pseudomonas oleovorans (ATCC 29347) grown solely with 10-undecenoic acid as a carbon source. The physical and chemical properties of the biosynethesized UPHA were characterized using NMR, FT-IR, GPC and DSC. The drug release experiments were carried out using HPLC with a diffusion cell fur the release amount of ketoprofen as model drug. The effects of crosslinking degree, patch thickness, and enhancer on the drug release were studied. The drug release rate was linearly decreased and consistent with increased crosslinking degree of the polymer matrix. The duration of drug release was enhanced by the Increased patch thickness. The drug release rate was increased with increased amount of propylene gylcol as an enhancer.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.39-43
• /
• 2006

The polyvinyl series organic films as gate insulators of thin film transistor(TFT) have been processed and characterized on the polyether sulphone (PES) substrates . The poly-4-vinyl phenol(PVP) and polyvinyl toluene (PVT) were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series; copolymer PVP(10 wt%), 5wt% cross-linked PVP(10 wt%), copolymer PVP(20 wt%), 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current of 1.2 pA at ${\pm}10V$. The ms value of surface roughness and the capcitance per unit area are 2.41 and $1.76nF/cm^2$ in the case of 10 wt% cross-linked PVP(20 wt%) layer, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.108.1-108.1
• /
• 2012

높은 균일도의 대면적 OLED 조명을 만들기 위해서는 보조배선이 필요하다. 이 때 보조배선이 노출되면 보조배선에서 발생하는 누설전류로 인하여 디바이스가 효율적으로 구동이 되지 않는다. 그래서 누설전류를 막기 위하여 절연층을 사용하게 된다. 본 연구에서는 그라비아 오프셋 프린팅 방식으로 절연층을 형성 하였다. 그라비아 오프셋 프린팅 방식은 포토리소그래피 공법에 비해 공정이 간단하여 제작비용이 낮아지고, 친환경적인 이점이 있다. 절연층 재료로는 PVP 유기 절연체를 사용하였다. 이 PVP 유기 절연체는 PVP Poly-4-vinylphenol, Propylene glycol monomethyl ether acetate, 그리고 Poly(melamineco-formaldehyde) metylate 재료들을 적절한 비율로 혼합하여 제작하였다. 제작된 용액은 최대 1840cps의 점도를 가지고 있다. 이 PVP용액으로 인쇄 테스트를 진행하였다. 일반적으로 그라비아 오프셋 프린팅 방식에서는 고점도 재료가 사용되지만, 이 PVP용액은 낮은 점도에서도 프린팅이 잘 되는 것을 확인 할 수 있었다. 재료의 열처리는 $100^{\circ}C$에서 10분 건조 후 $200^{\circ}C$에서 15분의 큐어링을 진행하였다. 인쇄에 사용한 패턴의 선폭은 50um~100um로 구현하였으며, 약 120cps의 점도에서 선폭 및 해상도가 패턴과 가장 유사하게 나타났다. 인쇄 후의 절연층은 최종적으로 약 1um의 두께와 낮은 접촉각을 형성하였다. 누설전류는 전압 20V인가시 0.12pA/$cm^2$의 값을 가진다. 이 결과는 동일 두께의 스핀코팅과 비슷하였다. 우리는 이 결과값을 토대로 보조배선과 PVP 유기 절연층을 그라비아 오프셋 프린팅 방식으로 인쇄 한 OLED 조명을 제작하였다.