• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.413-422
• /
• 2013

This experiment was conducted to clarify the effect of double layer mulching on reducing the labor required to weed control and Leaf sheath training of the garlic cultivation. Six mulching methods(non-mulching, transparent P.E., rice hull+transparent P.E., sawdust+transparent P.E., rice straw+transparent P.E., black P.E. film+ transparent P.E.) were used for the experiment, and transparent P.E film was removed on April 10. Weed occurrence was in the order of black P.E. film< transparent P.E

• Journal of Bio-Environment Control
• /
• v.9 no.3
• /
• pp.161-165
• /
• 2000

Spectroradiometric light transmittance from 300 to 1,100nm in the greenhouse covered with the CEM BIO polyethylene film was greater than that in the greenhouse covered with polyethylene film (control). As a whole, solar radiation transmittance into greenhouse was a half level, due to shades caused by double layer covering, frame and equipment. Net radiation energy emitted throughout surface of the greenhouse covered with CEM BIO polyethylene film was 5,424.5W.m$^{-2}$ , which was lower by 2.9% as compared to that of the greenhouse covered with polyethylene film. Photosynthetically active radiation from 400 to 700nm of the greenhouse covered with CEM BIO polyethylene film was 3,861.2W.m$^{-2}$ , which was higher by 3.8% as compared to hat of the greenhouse covered with polyethylene film. Accumulated minimum air temperature from Oct. 7, 1997 to Oct. 16, 1997 of the greenhouse covered with CEM BIO polyethylene film was 100.5$^{\circ}C$, which was higher by 2.5$^{\circ}C$ as compared to that of the greenhouse covered with polyethylene film. As results, height, stem diameter, leaf count, leaf area, fresh weight and dry weight of green pepper plants and canopy production structure measured at 30 days after transplanting were enhanced. Mean fruit weight n the greenhouse covered with CEM BIO polyethylene film was 11.28 g and 1.25 g greater as compared to that in the greenhouse covered with polyethylene film, due to increased fruit diameter and flesh thickness. Percent marketable fruits produced in the greenhouse covered with CEM BIO polyethylene film were 96.1%, and was greater by 2.7% thant that of the greenhouse covered with polyethylnee film due to decreased infection, sterility, severe curve and twisted fruits. The green pepper yield of the greenhouse covered with CEM BIO polyethylene film from Nov. 19, 1997 to Feb. 3, 1998 was greater by 974 kg per hectare than that of the greenhouse covered with polyethylene film, but the total fruit had no difference.

• Food Science and Preservation
• /
• v.2 no.2
• /
• pp.225-232
• /
• 1995

In order to study the effect of modified atmosphere packaging(M.A.P.) and controlled atmosphere(C. A.) storage on keeping freshness of mushrooms (Agricus-bisporus). Mushrooms was packaged with polyethylene(P.E.) film (40${\mu}{\textrm}{m}$, 60${\mu}{\textrm}{m}$, 80${\mu}{\textrm}{m}$) and C.A. conditions(CO2 concentration of 2%, O2 concentration of 2%) and storage at 0$\pm$1$^{\circ}C$, RH(relative hummidity) 92$\pm$1%. Gas composition in film was changed rapidly at early of storage, but it kept a constant level after 14 days of storage, and then kept at the level of 6~9% CO2 and 2~5% O2. Weight loss was 5% in non-packed mushrooms after 3 days of storage, but P.E. film, CO2 treated, C.A. conditions were 5% after 21 days of storage. Flesh firmness of the mushrooms was continuously decreased throughout storage period and the lowest of flesh firmness changed was 80${\mu}{\textrm}{m}$-P.E. film packing. Discoloration of the piteous of mushrooms appears to be the most Important factors to determine its marketability, L value of it appears to be of the high values at P.E. film packing and C.A. conditions during period. Large amount of ethanol and acetaldehyde were produced from the 7 days during storage, large contents of mannitol and trehalose were at the 14 days and 7 days during storage.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.619-625
• /
• 1995

Polycrystalline CdTe thin film has been studied for photovoltaic application due to the 1.45 eV band gap energy ideal for solar energy conversion and high absorption coefficient. The formation of low resistance contact to p-CdTe is difficult because of large work function(>5.5eV). Common methods for ohmic contact to p-CdTe are to form a p+ region under the contact by in-diffusion of contact material to reduce the barrier height and modify a p-CdTe surface layer using chemical treatment. In this study, the surface chemical treatment of p CdTe was carried out by H$\_$3/PO$\_$4/+HNO$\_$3/ or K$\_$2/Cr$\_$2/O$\_$7/+H$\_$2/SO$\_$4/ solution to provide a Te-rich surface. And various thin film contact materials such as Cu, Au, and Cu/Au were deposited by E-beam evaporation to form ohmic contact to p-CdTe. After the metallization, post annealing was performed by oven heat treatment at 150.deg. C or by RTA(Rapid Thermal Annealing) at 250-350.deg. C. Surface chemical treatments of p-CdTe thin film improved metal/p-CdTe interface properties and post heat treatment resulted in low contact resistivity to p-CdTe.Of the various contact metal, Cu/Au and Cu show low contact resistance after oven and RTA post-heat treatments, respectively.

• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.75-81
• /
• 2002

The ferroelectric properties of Pb(Zr,Ti)O$_3$[PZT] films degrade when the films with Pt top electrodes are annealed in hydrogen containing environment. This is due to the reduction activity of atomic hydrogen that is generated by the catalytic activity of the Pt top electrode. At the initial stage of hydrogen annealing, oxygen vacancies are formed by the reduction activity of hydrogen mainly at the vicinity of top Pt/PZT interface, resulting in a shift of P-E (polarization-electric field) hysteresis curve toward the negative electric field direction. As the hydrogen annealing time increases, oxygen vacancies are formed inside the PZT film by the inward diffusion of hydrogen ions, as a result, the polarization degrades significantly and the degree of P-E curve shift decreases gradually. The direction and the magnitude of the remnant polarization in the PZT film affect the motion of hydrogen ions which determines the degradation of polarization characteristics and the shift in the P-E hysteresis curve of the PZT capacitor during hydrogen annealing. When the remnant polarization is formed in the PZT film by applying a pre-poling voltage prior to hydrogen annealing, the direction of the P-E curve shift induced by hydrogen annealing is opposite to the polarity of the pre-poling voltage. The hydrogen-induced degradation behavior of the PZT capacitor is also affected by the internal field that has been generated in the PZT film by the charges located at the top interface prior to hydrogen annealing.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.10
• /
• pp.461-466
• /
• 2006

In the present work, we investigated the photodissolution and photodiffusion effect on the interface of Ag/chalcogenide $As_{40}Ge_{10}Se_{15}S_{35}$ thin film by measuring the absorption coefficient, the optical density, the resistance change of Ag layer. It was found that the photodissolutioniphotodiffution ratio depends on the magnitude of photon energy absorbed in the chalcogenide thin film and the depth of photodiffution was proportional to the square root of the exposed time. Also, we have investigated the holographic grating formation with P-polarization states on chalcogenide $As_{40}Ge_{10}Se_{15}S_{35}$ thin film and $As_{40}Ge_{10}Se_{15}S_{35}/Ag$ double layer structure thin film. Holographic gratings have been formed using He-Ne laser (632.8 nm) which have a smaller energy than the optical energy gap, $E_g\;_{opt}$ of the film, i. e., an exposure of sub-bandgap light $(h{\upsilon} under P-polarization. As the results, we found that the diffraction efficiency on $As_{40}Ge_{10}Se_{15}S_{35}/Ag$ double layer structure thin film was more higher than that on single $As_{40}Ge_{10}Se_{15}S_{35}$ thin film. Also, we obtained that the maximum diffraction efficiency was 0.27 %, 1,000 sec on $As_{40}Ge_{10}Se_{15}S_{35}\;(1{\mu}m)/Ag$ (10 nm) double layer structure thin film by (P: P) polarized recording beam. It will offer lots of information for the photodoping mechanism and the analyses of chalcogenide thin films.

• Korean Journal of Crystallography
• /
• v.11 no.4
• /
• pp.212-223
• /
• 2000

A stochiometric mix of CuInTe₂ polycrystal was prepared in a honizonatal furnace. To obtain the single crystal thin films, CuInTe₂ mixed crystal was deposited on throughly etched GaAs(100) by the HWE system. The source and substrate temperatures were 610℃ and 450℃ respectively, and the thickness of the deposited single crystal thin film was 2.4㎛. CuInTe₂ single crystal thin film was proved to be the optimal growth condition when the excition emission spectrum was the strongest at 1085.3 nm(1.1424 eV) of photoluminescence spectrum at 10 K, and also FWHM of Double Crystal X-ray Rocking Curve (DCRC) was the smallest, 129 arcsec. The Hall effect on this sample was measured by the method of Van der Pauw, and the carrier density and mobility dependent on temperature were 9.57x10/sup 22/ electron/㎥, 1.31x10/sup -2/㎡/V·s at 293 K, respectively. The ΔCr(Crystal field splitting) and the ΔSo (spin orbit coupling splitting( measured at f10K from the photocurrent peaks in the short wavelength of the CuInTe₂ single crystal thin film were about 0.1200 eV, 0.2833 eV respectively. From the PL spectra of CuInTe₂ single crystal thin film at 10 K, the free exciton (E/sub x/) was determined to be 1064.5 nm(1.1647 eV) and the donor-bound exciton(D/sup 0/, X) and acceptor-bound exciton (A/sup 0/, X) were determined to be 1085.3 nm(1.1424 eV) and 1096.8 nm(1.1304 eV0 respectively. And also, the donor-acciptor pair (DAP)P/sub 0/, DAP-replica P₁, DAP-replica P₂ and self-activated (SA) were determined to be 1131 nm (1.0962 eV), 1164 nm(1.0651 eV), 1191.1 nm(1.0340 eV) and 1618.1 nm (0.7662 eV), respectively.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.331-335
• /
• 2007

This study was conducted to investigate the soil mulching effect on bolting and growth of Angelica koreana Max. The bolting ratio were 8.4% of non-mulching, 11.4% of black polyethylene film, 13.6% of transparent polyethylene film, 6.4% of rice-straw mulching. The mulching of polyethylene film induced higher bolting response than other materials. The radical leaf length, the number of leaf and crown in black P.E. film mulched were all higher than those of non-mulching and rice-straw mulching. The yield of the underground part of P.E film mulching was higher than non-mulching and rice-straw mulching. Comparing with other treatments, the dry root yield of black P.E. film mulching showed the most.

• Korean Journal of Food Science and Technology
• /
• v.17 no.5
• /
• pp.331-335
• /
• 1985

Series of study were conducted to develop a method for longterm storage of chest-nut with preserving it's taste and freshness. Experiments were carried out with Korean chest-nut (Castanea crenata var. Okkwang) sealed in polyethylene (P.E) film stored under the ambient and low temperature. Summarized results are as follow: After the harvest, $CO_2$ produced by chest-nut at the early storage was increased with temperature increase. Q10 mg/kg/day, the temperature index of $CO_2$production, by chest-nut ranged 2.4-2.7. It was available to store chest-nut in good condition with 8-15% total loss upto the following may at the ambient temperature sealed in 0.03 mm P.E. film, and upto the following july at the low temperature if sealed in 0.03 or 0.05 mm P.E. film. Throughout the period from one month after the innitiation upto the end of the storage, the rate of $CO_2$and $O_2$ was maintained near the optimum condition for the CA storage of chest-nut. The taste of chest-nut was improved during the storage due to increased reducing-sugar and decreased wate soluble tannin. However, the taste become bitter and unacceptable from the early stage of the storage when used the thicker P.E. film (than above mentioned) for the sealing.

• Plant Resources
• /
• v.8 no.1
• /
• pp.27-31
• /
• 2005

This study was conducted to produce effectively more leaves of Angelica acutiloba through year-round production system by using various mulching materials. Soil temperature by covering treatment was the highest in P.E.(Polyethylene Film) mulching and followed by rice straw mulching, especially showing highest temperature in Tr. PE(Transparent Polyethylene Film) from April through May. Water content of soil was higher in P.E. mulching than in non-mulching. Leaf and stem production of Angelica acutiloba through year-round production showed the highest in PE mulching also root production of Angelica acutiloba showed the highest in P.E. mulching. These results suggest that leaf and stem production of Angelica acutiloba can be maximized through P.E. mulching cultivation system.