• BMB Reports
• /
• v.36 no.2
• /
• pp.167-172
• /
• 2003

The kinetics of thermal inactivation of copper-containing amine oxidase from lentil seedlings were studied in a 100 mM potassium phosphate buffer, pH 7, using putrescine as the substrate. The temperature range was between $47-60^{\circ}C$. The thermal inactivation curves were not linear at 52 and $57^{\circ}C$; three linear phases were shown. The first phase gave some information about the number of dimeric forms of the enzyme that were induced by the higher temperatures using the "conformational lock" pertaining theory to oligomeric enzyme. The "conformational lock" caused two additional dimeric forms of the enzyme when the temperature increased to $57^{\circ}C$. The second and third phases were interpreted according to a dissociative thermal inactivation model. These phases showed that lentil amine oxidase was reversibly-dissociated before the irreversible thermal inactivation. Although lentil amine oxidase is not a thermostable enzyme, its dimeric structure can form "conformational lock," conferring a structural tolerance to the enzyme against heat stress.

• Journal of Photoscience
• /
• v.8 no.3_4
• /
• pp.113-117
• /
• 2001

Several styrylquinolium salts were synthesized to investigate their absorption and thermal properties, which had five different p-aminobenzene units and three different counter ions (iodide, perchlorate, and hexafluorophosphorate anion), respectively. Hydroxy, methoxy, and methyl group in the meta position to the amino group led to bathochromic shift, while Ν-ethyl-Ν-chloroethylamino unit instead of Ν,Ν-diethylamino unit resulted in hypsochromic shift. A dye having a methoxy group in the meta position to the amino group had the highest molar extinction coefficient ($\xi$), while a dye carrying chloro group in Ν-alkyl chains had the lowest $\xi$. The type of counter ions had no effect on spectral properties like the maximum absorption wavelength and $\xi$. All styryl dyes had exothermic peaks at decomposition in DSC curves. Among these styryl dyes, S2 series with perchlorate anions showed the strongest exothermic decomposition. From TGA spectra, S3 series with hexafluorophosphorate anions had the best thermal stability and the sharpest threshold at thermal decomposition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.2
• /
• pp.136-145
• /
• 1986

The perfect and accurate methods to control the wear are not made clear so far. For this phenomenon only mating surface has been studied. In order to control the wear the essence of it has to be made clear. It is reported that adhesive wear might occure as a result of plastic deformation, the fracture and removal or transfer asperities on close contacting surfaces. On this view point the plastic flow was attempted to compare with fluid or electromagnetic flow. The partial differential equations of equilibrium for the plane strain deformation will make use of the method of characteristics. The characteristic curves or characteristics of the hyperbolic equation coincide with the slip lines by R. Hill's papers. By Hencky's stress equation, it is evident that if P and .phi. are prescribed for a boundary condition then it may be possible to proceed along constant .alpha. and .betha. lines to determine the value of the hydrostatic pressure everywhere in the slip line field net work. A wedge formation mechanism has been considered for an explanation of this matters. The analysis shows that there is a critical value, which depends on the hardness ratio and the shear stress on the interface, for the top angle of asperity is less than this critical value, the asperity can yield plastically despite of being harder than the mating surface.

• Archives of Pharmacal Research
• /
• v.12 no.3
• /
• pp.154-159
• /
• 1989

Pharmacokinetics and urinary excretion of sulfamethoxazole were investigated in healthy sheep. From the plasma disappearance curves after intravenous bolus injection (50 mg/kg), the half-life and volume of distribution were found to be 76 $\PM$14 min and 0.41 $\PM$ 0.18 lit/kg respectively. Body clearance was 4.06 $\PM$ 1.03 ml/kg/min. Very low Concentration of ddrug was present in plasma after 3 hours of administration and plasma level at 6 hour was only 4.4 $\PM$ 2.0 $\mu$g/ml. The renal clearance of sulfamethoxazole (22 $\PM$ 2.17 ml/min/10 kg) exeeded the creatinine clearance (9.78 $\PM$ 1, 57 ml/min/ 10 kg) which may be due to involvement of active tubular secretion and pH dependent back diffusion. Half of the dose of sulfamethoxazole was excreted as unchanged free drug while acetylated amine comprised of 20 percent within the first 6 hours of drug administration.

• The Plant Pathology Journal
• /
• v.16 no.5
• /
• pp.257-263
• /
• 2000

Infection with rice blast fungus (Magnaporthe grisea) significantly reduced foliar net photosynthesis (A) of rice cultivars: Ilpoom, Hwasung, and Choochung in greenhouse experiments. By measuring the amount of diseased leaf area with a computer image analysis system, the relation between disease severity (DS) and net photosynthetic rate was curvilinearly correlated (r=0.679). Diseased leaves with 35% blast symptom can be predicted to have a 50% reduction of photosynthesis. The disease severity was linearly correlated (r=0.478) with total chlorophyll (chlorophyll a and chlorophyll b) per unit leaf area(TC). Light use efficiency was reduced by the fungal infection according to the light response curves. However, dark respiration (Rd) did not change after the fungal infection (p=0.526). Since the percent of reduction in photosynthesis greatly exceeded the percent of leaf area covered by blast lesions, loss of photosynthetic tissue on an area basis could not by itself account for the reduced photosynthesis. Quantitative photosynthetic reduction can be partially explained by decreasing TC, but cannot be explained by decreasing Rd. By photosynthesis (A)-internal CO$_2$ concentration (C$_i$ curve analysis, it was suggested that the fungal infection reduced ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) activity, ribulose-1,5-bisphosphate (RuBP) regeneration, and inorganic phosphate regeneration. Thus, the reduction of photosynthesis by blast infection was associated with decreased TC and biochemical capacity, which comprises all carbon metabolism after CO$_2$ enters through the stomata.

• Advances in concrete construction
• /
• v.9 no.4
• /
• pp.337-343
• /
• 2020

In the present study, by employing fragility analysis, the seismic vulnerability of a concrete girder bridge, one of the most common existing structural bridge systems, has been performed. To this end, drift demand model as a fundamental ingredient of any probabilistic decision-making analyses is initially developed in terms of the two most common intensity measures, i.e., PGA and Sa (T₁). Developing a probabilistic demand model requires a reliable database that is established in this paper by performing incremental dynamic analysis (IDA) under a set of 20 ground motion records. Next, by employing Bayesian statistical inference drift demand models are developed based on pre-collapse data obtained from IDA. Then, the accuracy and reasonability of the developed models are investigated by plotting diagnosis graphs. This graphical analysis demonstrates probabilistic demand model developed in terms of PGA is more reliable. Afterward, fragility curves according to PGA based-demand model are developed.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.820-832
• /
• 2001

In order to obtain the basic data on the optimum conditions of electroforming process for fabricating the micro wiring pattern for plate type micro- motor core, characteristics of plating bath and properties of deposits were studied with various copper plating baths which contain sulfate, fluoborate, pyrophosphate and cyanide salt, respectively. Cathodic polarization, throwing power, internal stress, texture and surface morphology of deposits were observed. Throwing power of plating solution is deeply related to the polarization curves and the values are in the range of +20∼20%. The order of values ate as follows- pyrophosphate, cyanide, sulfate and fluoborate bath. Internal stresses of deposits are tensile in all of the copper plating bath. Thickness of the deposits plated at the center of holes has the highest value in the pyrophosphate bath and K factor, ratio of height and width of deposit, is 1.44. It was confirmed that the pyrophosphate bath was the best one for the electroforming of wire pattern.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.129-136
• /
• 2010

A series of noble poly(amide-imide)s and copoly(amide-imide)s bearing 1,2-bis(4-phenoxy)benzene units were synthesized by the direct polycondensation of 1,2-bis(4-trimellitimidophenoxy)benzene[1,2-PTPB] with a combination of commercially available aromatic diamines and diacids such as m-phenylene diamine, p-phenylene diamine(PPD), isophthalic acid and terephthalic acid(TA) in N-methyl-2-pyrrolidone(NMP) using triphenyl phosphite and pyridine as a condensing agent in the presence of dehydrating agent ($CaCl_2$). The resulting polymers had inherent viscosities in the range of 0.37~0.78 dL/g and most of them were soluble m common organic solvents including NMP, dimethylacetamide, dimethylsulfoxide, dimethylformamide, and m-cresol. Wide-angle X-ray diffractograms revealed that the copoly(amide-imide) derived from PPD with mixed acids of 1,2-BTPB and TA, showed crystalline nature, whereas all of the other polymers were found to be amorphous. The glass transition temperatures of the polymers occurred over the temperature range of $270{\sim}323^{\circ}C$ in their differential scanning calorimetry curves and their 10% weight loss temperature, determined by thermogravimetric analysis in air and nitrogen atmosphere, were in the range $465{\sim}535^{\circ}C$, $500{\sim}550^{\circ}C$, respectively, indicating their good thermal stability.

• Journal of Astronomy and Space Sciences
• /
• v.3 no.1
• /
• pp.1-13
• /
• 1986

A long-term project(ten-year ; 1982-92) for the photoeletric observation in the UBV passbands of selected eclipsing binaries with P$\geq$10 days has initiated at Yonsei University Observatory using 40-cm and 61-cm reflectors. the instrumentatio used and the observation techniques and the reduction procedures applied to this investiagation are described. Out of 39 program stars, successful results have been obtained during our first two years for the 11 stars listed below, with the orbital period in days in the parenthesis, and the incomplete light curves of these stars are presented. SX Cas (36.57) AQ Cas (11.72) UU Cnc (96.71) RY Gem (9.30) V373 Cas (13.42) NY Cep (15.28) RX Cas (32.32) V396 Cas (15.28) ZZ Cnc (25.60) Zet Aur (982.2) Eps Aur (9885.) For the rest of the stars, the observations made in the first two years are not sufficient to attempt any meaning light curve construction ; some of the data are too fragmented and others show large scatter.

• Natural Product Sciences
• /
• v.12 no.4
• /
• pp.237-240
• /
• 2006

Paeoniflorin, the major component of the root of Paeonia lactiflora, was quantitatively analyzed using $^1H-NMR$ spectrometry. The quantity of paeoniflorin was calculated by the ratio of the intensity of the signals (H-9, H-10, H-2', 6') to the aldehyde peak of the known amount of internal standard, 2,4,6-trihydroxybenzaldehyde. These results were compared with the conventional HPLC method. The contents of paeoniflorin in P. lactiflora, which were respectively calculated by H-9, H-10, H-2', 6' in the $^1H-NMR$ spectra and HPLC, were determined $2.60{\pm}0.07,\;2.44{\pm}0.09,\;2.77{\pm}0.12\;and\;2.46{\pm}0.16%$. The advantages of quantitative $^1H-NMR$ analysis are that can be analyzed to identify and quantify, and no reference compounds required for calibration curves. Besides, it allows rapid and simple quantification for paeoniflorin with an analysis time for only 20 min without any preprocessing.