• Title/Summary/Keyword: P-Y curves

Search Result 993, Processing Time 0.039 seconds

A study on the analysis of rare earth elements by differential pulse anode stripping voltammetry (시차펄스 양극벗김 전압-전류법에 의한 희토류 원소의 분석에 관한 연구)

  • Kim, Jae-Kyun;Cha, Ki-Won
    • Analytical Science and Technology
    • /
    • v.18 no.5
    • /
    • pp.369-375
    • /
    • 2005
  • The differential pulse anode stripping voltammograms of some rare earth elements and their complexes with catechol have been investigated in various pH and electrolytes. In a 0.1 M LiCl and pH 5.3 solution, $Euv^{3+}$ and $Pr^{3+}$ showed a single oxidation peak at -0.2 V and the oxidation currents were linearly increased with the concentration of those ions. $Tm^{3+}$, $Tb^{3+}$, $Yb^{3+}$ and $Sm^{3+}$ showed two oxidation peaks at -0.5 V and -0.2 V and the oxidation currents at -0.5 V were increased with the concentration increase of those ions. The linear range of those calibration curves was in 1 ppm-10 ppm. In the case of voltammograms of catechol complexes of rare earth elements, $Tb^{3+}$-catechol and $Eu^{3+}$-catechol complex showed a single oxidation peak at -0.95 V and -0.65V, respectively and $Sm^{3+}$-catechol, $Pr^{3+}$-catechol, $Tm^{3+}$-catechol and $Yb^{3+}$-catechol complexes showed two oxidation peaks. The linear range of the calibration curves of those complex was 0.1 ppm~1.0 ppm.

Consolidation Characteristics & Consolidation Period of Dredged Soil by Considering Change of Strain and Stratum Thickness (변형률과 층 두께의 변화를 고려한 준설점토의 압밀특성과 압밀기간)

  • Cheong Gyu-Hyang;Kim Young-Nam;Ju Jae-Woo
    • Journal of the Korean Geotechnical Society
    • /
    • v.20 no.9
    • /
    • pp.105-114
    • /
    • 2004
  • Consolidation characteristics have been investigated by using Rowe cell consolidation tester for dredged soil, which is more than two times as much as the liquid limit. To examine the effects of variation of water content on consolidation characteristic, tests were carried out varying the initial water content from $100\%\;to\;150\%.$ The results were compared with the consolidation characteristics of remolded clay. The test results showed that the hither the initial water content of dredged clay was, the more noticeable the non-linear behavior of e-log P curves occurred. The variation of the gradient was apparent to load stage 40kPa and became less apparent after load stage 80kPa on the e-log P curves. Ratio of compression index stayed within the range suggested by Mesri and variation of initial water content has hardly influenced the coefficient of consolidation. On the contrary, it was found that the magnitude of consolidation load affects the vertical coefficient of consolidation. The variation of stratum thickness during consolidation processing needs to be taken into consideration since hydraulic fill would go through a much larger scale strain than land soil when it is subject to a load. In this study, the consolidation period considering the variation of stratum thickness was analyzed and the results were compared with those of existing consolidation studies which did not consider the variation of stratum thickness. According to the results of the study, the consolidation period of the ground with a larger strain was calculated more close to observed value in case of Mikasa theory which takes the variation of stratum thickness into consideration.

S-wave Velocity Structure Beneath the KS31 Seismic Station in Wonju, Korea Using the Joint Inversion of Receiver Functions and Surface-wave Dispersion Curves and the H-κ Stacking Method (수신함수와 표면파 분산곡선의 복합역산 및 수신함수 H-κ 중첩법을 이용한 원주 KS31 지진관측소 하부의 S파 지각 속도구조)

  • Jeon, Tae-Hyeon;Kim, Ki-Young;Park, Yong-Cheol;Kang, Ik-Bum
    • Geophysics and Geophysical Exploration
    • /
    • v.15 no.1
    • /
    • pp.8-15
    • /
    • 2012
  • To estimate the S-wave velocity structure beneath the KS31 broad-band station in Wonju, Korea, we used $H-{\kappa}$ stacking and joint inversion of receiver functions and surface-wave dispersion curves derived from 297 teleseismic events (Mw > 5.5) recorded during the period between 2002 and 2009. We thereby determined that the average depth to a nearly flat Moho is $32.4{\pm}0.5\;km$ within tens of kilometer radius of the seismic station. For the crust at this location, we estimate an average shear-wave velocity of 3.69 km/s and a ratio of P- to S-wave velocities, $V_p/V_s$, of $1.72{\pm}0.04$, as is typical for continental crust. A negative phase in the receiver functions at 1 s indicates the presence of a shearwave low velocity layer in a depth interval of 10 to 18 km in the upper crust beneath the KS31 station.

Analysis of the Implementation Effect of Total Water Load Management System Using Load Duration Curves in Sapgyo Watershed (부하지속곡선을 이용한 삽교천 유역의 오염총량관리제도 시행효과 분석)

  • Lee, Eunjeong;Kim, Taegeun
    • Journal of Environmental Impact Assessment
    • /
    • v.28 no.6
    • /
    • pp.536-548
    • /
    • 2019
  • In order to quantify the effect of the newly established the Total Water Load Management System in Sapgyo watershed, this study predicted the achievement of the target water quality at each unit watershed and the water quality according to the flow section. The HSPF model, which is the watershed runoff model, was constructed and operated based on 2015, and the water quality was predicted by inputting the loads in final target year(2030). The Load Duration Curve (LDC) was created using the simulated results of base year and target year. As a result of plotting water quality by flow conditions, it was simulated to be close to the BOD target with a difference of 0.1 ~ 0.2 mg/L in all three watersheds during the mid-range flow interval (40 ~ 60%). In case of T-P, although the target water quality was not set, the water quality was improved by Cheonan A 46%, Kokgyo A 29% and Namwon A 25%. The Muhan and Sapgyo river basins meet the target grade of middle-watershed standards. The improvement effect will be positive, as water quality, which achieves the target of Total Load Management System and the target grade of the middle-watershed standards will be expected to flow into the Sapgyo lake.

Ecophysiological Interpretations on the Water Relations Parameters of Trees(II) - Seasonal Changes in Tissue-Water Relations Parameters Obtained from P-V Curves on the Pinus koraiensis and Abies holophylla Shoots - (수목(樹木)의 수분특성(水分特性)에 관한 생리(生理)·생태학적(生態學的) 해석(解析)(II) - P-V 곡선(曲線)에 의한 잣나무와 젓나무 지엽(枝葉)의 수분특성(水分特性) 인자(因子)의 계절변화(季節变化) -)

  • Han, Sang Sup;Choi, Heung Seon
    • Journal of Korean Society of Forest Science
    • /
    • v.61 no.1
    • /
    • pp.8-14
    • /
    • 1983
  • This study was to diagnose the ontogenetic ability of drought tolerance in trees, and was to investigate the seasonal changes in tissue-water relations parameters, ${\pi}_o$, ${\pi}_p$, $E_{max}$, $N_s/DW$, $V_o/W_s$ and $RWC_{(tlp)}$, obtained from P-V curves on the Pinus koraiensis and Abies holophylla shoots. The results obtained are as follows; 1) Seasonal changes of original osmotic pressure at maximum turgot, ${\pi}_o$, were -1.2 to -1.6 MPa in Pinus koraiensis and -1.4 to -1.7 MPa in Abies holophylla. 2) Seasonal changes of osmotic pressure at incipient plasmolysis, ${\pi}_p$, were -1.8 to -2.1 MPa in Pinus koraiensis and -1.6 to -2.1 MPa in Abies holophylla. 3) Seasonal changes of relative water content at incipient plasmolysis, $RWC_{(tlp)}$, were 70 to 77% in Pinus koraiensis and 69 to 85% in Abies holophylla. 4) Seasonal changes of maximum bulk modulus of elasticity at maximum hydration, $E_{max}$, were 2.2 to 6.3 MPa in Pinus koraiensis and 3.1 to 7.9 MPa in Abies holophylla. 5) Seasonal changes of number of osmoles of solute in symplasm versus dry weight, $N_s/DW$, were 0.5 to 1.3 in Pinus koraiensis and 0.3 to 1.0 in Abies holophylla. 6) Seasonal changes of original osmotic water volume versus total water volume (symplasmic and apoplastic water), $V_o/W_s$, were 55 to 65%r in Pinus koraiensis and 40 to 65% in Abies holophylla. Consequently, as the comparative values of ${\pi}_o$, ${\pi}_p$, $E_{max}$, $N_s/DW$, $V_o/W_s$, and $RWC_{(tlp)}$, it might be suggested that Abies holophylla shoot could have more or less a greater ability of drought tolerance as compared with Pinus koraiensis shoot.

  • PDF

Study on Growth Curves of Longissimus dorsi Muscle Area, Backfat Thickness and Body Conformation for Hanwoo (Korean Native) Cows

  • Lee, J.H.;Oh, S.H.;Lee, Y.M.;Kim, Y.S.;Son, H.J.;Jeong, D.J.;Whitley, N.C.;Kim, J.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.27 no.9
    • /
    • pp.1250-1253
    • /
    • 2014
  • The objective of this study was to estimate the parameters of Gompertz growth curves with the measurements of body conformation, real-time ultrasound longissimus dorsi muscle area (LMA) and backfat thickness (BFT) in Hanwoo cows. The Hanwoo cows (n = 3,373) were born in 97 Hanwoo commercial farms in the 17 cities or counties of Gyeongbuk province, Korea, between 2000 and 2007. A total of 5,504 ultrasound measurements were collected for the cows at the age of 13 to 165 months in 2007 and 2008. Wither height (HW), rump height (HR), the horizontal distance between the top of the hips (WH), and girth of chest (GC) were also measured. Analysis of variance was conducted to investigate variables affecting LMA and BFT. The effect of farm nested in location was included in the statistical model, as well as the effects of HW, HR, WH, and GC as covariates. All of the effects were significant in the analysis of variance for LMA and BFT (p<0.01), except for the HR effect for LMA. The two ultrasound measures and the four body conformation traits were fitted to a Gompertz growth curve function to estimate parameters. Upper asymptotic weights were estimated as $54.0cm^2$, 7.67 mm, 125.6 cm, 126.4 cm, 29.3 cm, and 184.1 cm, for LMA, BFT, HW, HR, WH, and GC, respectively. Results of ultrasound measurements showed that Hanwoo cows had smaller LMA and greater BFT than other western cattle breeds, suggesting that care must be taken to select for thick BFT rather than an increase of only beef yield. More ultrasound records per cow are needed to get accurate estimates of growth curve, which, thus, helps producers select animals with high accuracy.

The study on characteristics and fabrications of ferroelectric $LiNbO_3$ thin films using RF sputtering (RF스퍼터링법을 이용한 강유전체 $LiNbO_3$ 박막의 제작과 특성연구)

  • Choi, Y.S.;Jung, S.M.;Choi, S.W.;Yi, J.
    • Proceedings of the KIEE Conference
    • /
    • 1998.07d
    • /
    • pp.1352-1354
    • /
    • 1998
  • $LiNbO_3$ transistor showed relatively stable characteristic, low interface trap density, and large remanent polarization. This paper reports ferroelectric $LiNbO_3$ thin films grown directly on p-type Si(100) substrates by 13.56 MHz rf magnetron sputtering system for FRAM applications. To take advantage of low temperature requirement for growing films, we deposited $LiNbO_3$ films lower than $300 ^{\circ}C$. RTA(Rapid Thermal Anneal) treatment was performed for as-deposited films in an oxygen atmosphere at $600^{\circ}C$ for 60 sec. We learned from X-ray diffraction that the RTA annealed films were changed from amorphous to poly-crystalline $LiNbO_3$ which exhibited (012), (015), and (022) orientations. The I-V characteristics of $LiNbO_3$ films before and after anneal treatment showed that RTA improved the leakage current of films. The leakage current density of films decreased from $10^{-5}$ to $10^{-7} A/cm^2$ at room temperature measurement. Breakdown electric field of the films exhibited higher than 500 kV/cm. The C-V curves showed the clockwise hysteresis represents ferroelectric switching characteristics. From C-V curves, we calculated dielectric constant of thin film $LiNbO_3$ as 27.5 which is close to that of bulk value.

  • PDF

Preparation of ultra-clean hydrogen and deuterium terminated Si(111)-($1{\times}1$) surfaces and re-observation of the surface phonon dispersion curves

  • Kato, H.;Taoka, T.;Murugan, P.;Kawazoe, Y.;Yamada, T.;Kasuya, A.;Suto, S.
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.4-5
    • /
    • 2010
  • The surface phonon is defined as a coherent vibrational excitation of surface atoms propagating along the surface. It is characterized by a phonon dispersion curves, which were extensively studied in 1990's using helium atom scattering and high-resolution electron-energy-loss spectroscopy (HREELS)[1].The understanding is mainly based on the theoretical framework of a classical bond model or cluster calculations. The recent sample preparation and first principles calculations open the naval way to deep insight for surface phonon problems. The surface phonon dispersion on the hydrogen-terminated Si(111)-($1{\times}1$) surface [H:Si(111)] is the typical system and already reported experimentally [2] and theoretically [3], although the understandingis incomplete. The sample contaminated by the oxygen atoms on the surface and the calculations were also classical. In this study, firstly, we have prepared an ultra-clean H:Si(111) surface [4] and measured the surface phonon dispersion curvesusing HREELS. Secondly, we have performed first-principles density functional calculations with the projector augmented wave functionals, as implemented in VASP, using generalized gradient approximations. We used aslab of six silicon layers and both top and bottom surfaces were terminated with hydrogen atoms. Finally, we have compared with the surface phonon dispersion of deuterium-terminatedSi(111)-($1{\times}1$) surface[5] and led to our conclusions. The Si-H stretching and the bending modes are observed at 258.5 and 78.2 meV, respectively. These energies are the same as the previously reported values [2], but the energy-loss peaks at the lower energy regions are dramatically shifted. Through this combination study, we have formulated the procedure of preparing ultra-clean H:Si(111)/D:Si(111), which was confirmed by HREELS vibrational analysis. The Si surface will be utilized for further nano-physics research as well as for the materials for nano-fubrication.

  • PDF

Research on Optimizing Luminosity Factor Through Color Filter $Y_{1-X}G_X$, $Y_{1-X}P_X$ ($Y_{1-X}G_X$, $Y_{1-X}P_X$ 칼라필터를 통한 시감도 최적화 연구)

  • Kim, YongGeun;Park, Hyun-Ju
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.14 no.1
    • /
    • pp.47-56
    • /
    • 2009
  • Purpose: To find optimized luminosity factor of color from light transmission filter. Methods: To make $Y_{1-x}G_{x}$, $Y_{1-x}P_{x}$ by using CR-39 compound within dipping method, mixing up Y(Yellow), G(green) and P(pink) for optimize eye sensitivity. Modeling for relative luminous efficiency(relative sensitivity) curves in Luminose transmission, it could be resolved by Multiplying sensitivity of eye within transmission rate of Lens ($P_f({\lambda}=T({\lambda}){\cdot}P({\lambda}).)$.). To evaluate Wavelength between 400~700 nm, relative luminous efficiency curve in Area and Height value is being used. Results: In color filter of $Y_{1-x}G_{x}$ position of x equals to 0.04, 0.1, 0.08, 0.12, 0.14, 0.5 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 76.1, 77.9, 80.7, 81.6, 80.2, 18.6 In color filter of $Y_{1-x}P_{x}$ position of x equals to 1.00, 0.2, 0.6, 0.8 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 74.3, 74.0, 70.5, 33.0 The result from experiment $Y_{1-x}P_{x}$ value less than $Y_{1-x}G_{x}$, from evaluating luminous efficiency curve and test was successfully optimized. Conclusions: Optimized relative luminous efficiency curve result have value of X=0.12-0.14 at $Y_{1-x}G_{x}$.

  • PDF

A Case Study on the Design and Construction of the Pile Bent System (단일현장타설말뚝을 이용한 교량기초의 설계 및 시공 사례)

  • Cho, Sung-Han;Kim, Hyung-Wook;Kim, Zu-Cheol
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.09a
    • /
    • pp.357-367
    • /
    • 2010
  • In this study, several design and construction cases of the pile bent system for bridges were introduced. The lateral displacement of the pile bent system is larger than the displacement of pile cap system, due to the smaller bending stiffness and the longer unsupported length. So, the analysis of the lateral pile displacement is main factor for the design of pile bent system and superstructure. For the accurate estimation of the pile displacement, an iterative analysis method was developed. The superstructure was analyzed regarding the pile foundation as $6{\times}6$ spring and the substructure was analysed using non-linear load transfer curves (p-y, t-z, q-z curve). And, to verify this analysis method, the estimated displacements are compared with the results of lateral load test. This analysis method is expected to be a viable alternative approach for the design of bridge foundation hereafter.

  • PDF