• Title/Summary/Keyword: P-V Characteristics

Search Result 1,906, Processing Time 0.034 seconds

Cultural Characteristics and Pilot Scale Fermentation for the Submerged Mycelial Culture of Lentinus dfodes (표고버섯 균사체의 배양특성 및 Pilot Scale 생산)

  • 이병우;임근형;박기문;손태화;김동욱;손세형
    • Microbiology and Biotechnology Letters
    • /
    • v.21 no.6
    • /
    • pp.609-614
    • /
    • 1993
  • The optimum conditions for the submerged mycelial culture of Lentinus edodes SR-1 were elucidated to be incubation temperature of 25C, initial pH 4.0, agitation of 300 rpm, inoculation of 10.0%(v/v), and aeration of 1.0 v/v/m in TGY medium. The optimum c/n ratio and economic yield coeffcient for the submerged mycelial culture were 13.1:1 and 0.45 respectively. As the plant growth hormones test, SCM medium containing 0.5ppm of 2,4-dicholorophenoxyacetic acid increased mycelial yield in 1.1%, but 6-benzylaminopurine was not effective.

  • PDF

Preparation and Characteristics of Ferroelectric $\textrm{SrBi}_{2}\textrm{Ta}_{2}\textrm{O}_{9}$ Thin Films Deposited by Plasma-Enhanced Metalorganic Chemical Vapor Deposition Technique with Various Deposition Temperatures (PEMOCVD에 의한 강 유전체 $\textrm{SrBi}_{2}\textrm{Ta}_{2}\textrm{O}_{9}$박막의 제조 및 증착온도 특성)

  • Seong, Nak-Jin;Yun, Sun-Gil
    • Korean Journal of Materials Research
    • /
    • v.7 no.5
    • /
    • pp.381-385
    • /
    • 1997
  • PEMOCVD에 의해서 SrBi$_{2}$Ta$_{2}$O$_{9}$밥막이 낮은 온도에서 성공적으로 Pt/Ti/SiO$_{2}$Si위에 증착되었다. 5$50^{\circ}C$에서 증착된 200nm박막은 치밀하고 작은 결정립을 보였으며 3V의 인가전압하에서 이력곡선은 포화되기 시작하였다. 3V에서 박막은 잔류분극 (P$_{r}$)과 항전계(E$_{c}$)는 각각 15$\mu$/$\textrm{cm}^2$과 50kV/cm이었다. 6V bipolar square pulse의 피로측정에서 박막은 1.0x$10^{11}$cycles까지 피로 현상을 보이지 않았다. PEMOCVD에 의해서 5$50^{\circ}C$에서 증착된 SBT박막은 비휘발성 기억소자에 충분히 활용할 수 있다.다.

  • PDF

Effects of Impurity Concentration in Channel of LDMOSFET on the Electrical Characteristics of CMOS Circuit (LDMOSFET에서 채널의 불순물 농도변화에 의한 CMOS회로의 전기적 특성)

  • Cui, Zhi-Yuan;Kim, Nam-Soo;Lee, Hyung-Gyoo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.07a
    • /
    • pp.11-12
    • /
    • 2005
  • 2 차원 MEDICI 시뮬레이터를 이용하여 CMOS 회로의 전기적 특성을 조사하였다. CMOS 인버터 회로는 LDMOSFET를 이용하였는데, LDMOSFET에서 전류 및 스위칭 특성에 많은 영향을 주는 곳은 채널이라고 생각되는데, 채널에서의 불순물 농도 변화에 의한 CMOS 회로의 voltage transfer특성, low input voltage($V_{IL}$), high input voltage($V_{IH}$)등을 조사하였다. LDMOSFET에서 N 채널의 농도는 $V_{IL}$에, P 채널의 농도는 $V_{IH}$에 많은 영향을 주었다.

  • PDF

Effect of Oxygen and Diborane Gas Ratio on P-type Amorphous Silicon Oxide films and Its Application to Amorphous Silicon Solar Cells

  • Park, Jin-Joo;Kim, Young-Kuk;Lee, Sun-Wha;Lee, Youn-Jung;Yi, Jun-Sin;Hussain, Shahzada Qamar;Balaji, Nagarajan
    • Transactions on Electrical and Electronic Materials
    • /
    • v.13 no.4
    • /
    • pp.192-195
    • /
    • 2012
  • We reported diborane ($B_2H_6$) doped wide bandgap hydrogenated amorphous silicon oxide (p-type a-SiOx:H) films prepared by using silane ($SiH_4$) hydrogen ($H_2$) and nitrous oxide ($N_2O$) in a radio frequency (RF) plasma enhanced chemical vapor deposition (PECVD) system. We improved the $E_{opt}$ and conductivity of p-type a-SiOx:H films with various $N_2O$ and $B_2H_6$ ratios and applied those films in regards to the a-Si thin film solar cells. For the single layer p-type a-SiOx:H films, we achieved an optical band gap energy ($E_{opt}$) of 1.91 and 1.99 eV, electrical conductivity of approximately $10^{-7}$ S/cm and activation energy ($E_a$) of 0.57 to 0.52 eV with various $N_2O$ and $B_2H_6$ ratios. We applied those films for the a-Si thin film solar cell and the current-voltage characteristics are as given as: $V_{oc}$ = 853 and 842 mV, $J_{sc}$ = 13.87 and 15.13 $mA/cm^2$. FF = 0.645 and 0.656 and ${\eta}$ = 7.54 and 8.36% with $B_2H_6$ ratios of 0.5 and 1% respectively.

Characteristics of Culture Conditions for the Production of Biosurfactant by Bacillus pumilus IJ-1 (Bacillus pumilus IJ-1의 생물계면활성제 생산을 위한 배양 특성)

  • Park, Eunjin;Kim, Jiyeon
    • Journal of Applied Biological Chemistry
    • /
    • v.58 no.1
    • /
    • pp.81-88
    • /
    • 2015
  • To characterize the culture medium for the biosurfactant production by Bacillus pumilus IJ-1, the influences of various carbon, nitrogen and mineral sources were assessed. As a result, the highest biosurfactant production was observed after 96 h cultivation containing 0.5% (w/v) tryptone. The strain was able to grow and produce biosurfactant at 0-10% (w/v) NaCl, in the pH range of 5-10, and at $20-45^{\circ}C$. Optimal culture conditions for the biosurfactant production were at $20^{\circ}C$ and pH 9.0 after 72 h incubation and the surface tension of biosurfactant was 27.0 dyne/cm.

Elasticity of the Funnel Ribs and Hydrodynamic Characteristics on the Sea Eel Pots (장어통발의 깔대기 탄성과 유체역학적 특성)

  • Kim, Yong-Hae;Ha, Jeong-Sik
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.23 no.4
    • /
    • pp.157-162
    • /
    • 1987
  • The basic experiments on the plastic sea eel pots used in fishing were carried out in order to investigate the elasticity of the funnel ribs, hydrodynamic resistance, sinking time and diffusion of the bait from June to October, 1987. The elasticity of the bamboo funnel ribs was higher than that of the polypropylene ribs up to the load 150g. The hydrodynamic resistance R (kg) of the pots towing to the head direction horizontally in relation to towing velocity V (m/sec) was expressed as following formula; R=0.36V super(2.01) and coefficient of drag C sub(D) was 0.52. The sinking times of the covered pots by tape fully or partially were late 1-2 second than the typical pots within the water depth 7.5m. The diffusion tendency through the covered pots using dye and sardine extracts solution was concentrated to the entrance more than the typical pots. However, fishing efficiency as number and weight of fish per pots for nine times fishing operation was revealed no difference between the covered pots and the typical pots.

  • PDF

The novel SCR-based ESD Protection Circuit with High Holding Voltage Applied for Power Clamp (파워 클램프용 높은 홀딩전압을 갖는 사이리스터 기반 새로운 구조의 ESD 보호회로)

  • Lee, Byung-Seok;Kim, Jong-Min;Byeon, Joong-Hyeok;Park, Won-Suk;Koo, Yong-Seo
    • Journal of IKEEE
    • /
    • v.17 no.2
    • /
    • pp.208-213
    • /
    • 2013
  • In this paper, we proposed the novel SCR-based ESD protection circuit with high holding voltage for power clamp. In order to increase the holding voltage, the floating p+ and n+ to n-well and p-well, respectively, in the conventional SCR. The resulting increase of the holding voltage of the our proposed ESD circuit enables the high latch-up immunity. The electrical characteristics including ESD robustness of the proposed ESD circuit have been simulated using Synopsys TCAD simulator. According to the simulation result, the proposed device has higher holding voltage of 4.98 V than that of the conventional SCR protection circuit. Moreover, it is confirmed that the device could have the holding voltage of maximum 13.26 V with the size variation of floated diffusion area.

Stable Desalination of Hardness Substances through Charge Control in a Capacitive Deionization System (축전식 탈염 시스템에서 전하량 제어를 통한 경도물질의 안정적인 탈염)

  • Kim, Yoon-Tae;Choi, Jae-Hwan
    • Applied Chemistry for Engineering
    • /
    • v.30 no.4
    • /
    • pp.472-478
    • /
    • 2019
  • A stable desalination method of the hardness substance such as $Ca^{2+}$ by controlling the total charge (TC) supplied to the membrane capacitive deionization (MCDI) cell was studied. The adsorption (1.5 V) and desorption (0.0 V) were repeated 30 times while varying the TC in the adsorption process. The concentration and pH of effluent, adsorption and desorption amounts, current densities and cell potentials were analyzed in the desalination process. The maximum allowable charge (MAC) of the carbon electrode used in MCDI cell was measured to be 46 C/g. As a result of operation at TC (40 C/g) below the MAC value, electrode reactions did not occur, resulted in the stable desalination characteristics for a long-term operation. When operating at TCs (50, 60 C/g) above the MAC value, however, the concentration and pH of effluent varied greatly. Also, the scale was formed on the electrode surface due to electrode reactions, and the electric resistance of the cell gradually increased. It was thus concluded that it is possible to remove stably the hardness substance without any electrode reactions by controlling the charge supplied to MCDI cell during the adsorption process.

Study on the Morphologies and Electrical Properties in Polymer Blend Thin-Films Based on Two Poly(3-hexylthiophene) Conjugated Polymers with Different Regio-regularities (서로 다른 위치 규칙성을 가지는 두 개의 Poly(3-hexylthiophene) 공액 고분자를 기반으로 한 고분자 복합 박막의 구조와 전기적 특성에 대한 연구)

  • Ganghoon Jeong;Nann Aye Mya Mya Phu;Rae-Su Park;Jeong Woo Yun;Yeongun Ko;Mincheol Chang
    • Composites Research
    • /
    • v.36 no.5
    • /
    • pp.349-354
    • /
    • 2023
  • Poly(3-hexylthiophene) (P3HT) is a conjugated polymer that is highly soluble in organic solvents and is readily available. However, its electrical properties as an active channel in electronic devices are not enough for practical applications, necessitating further improvement in the properties. In this study, we demonstrate that the blending of two P3HT polymers (i.e., regio-regular (RR) P3HT and regio-random (RRa) P3HT) with different regioregularities can significantly improve charge transport characteristics of the blend films. The morphological and electrical properties of the blend films were systematically investigated by varying the ratio between two P3HT polymers. Atomic force microscopy (AFM), X-ray diffraction (XRD), and UV-visible absorption spectroscopy (UV-vis) were employed to evaluate the morphological and optoelectronic properties of the blend films. The crystallinity of the blend films increased with increasing the content of RRa-P3HT to 20 wt% and gradually decreased as the content increased to 80%. Consistently, the highest charge carrier mobility was obtained from the blend films containing 20 wt% RRa-P3HT, which value was measured to be 0.029 cm2/V·s. The values gradually decreased to 0.0007 cm2/V·s with increasing the content of RRa-P3HT to 80 wt%.

Factors associated with Cognitive Decline in the Elderly in Community (일 지역사회 노인의 인지기능저하 요인)

  • Kwon, Young-Sook;Paek, Kyung-Shin
    • Journal of Digital Convergence
    • /
    • v.12 no.2
    • /
    • pp.587-594
    • /
    • 2014
  • This study was carried out to look into the cognitive function of the elderly in community and investigate the factors affecting their cognitive decline provide preliminary data so as to help develop a program to maintain and promote cognitive function. With 481 senior citizens aged over 65 in J. city, a survey was conducted on their demographic characteristics, health-related characteristics and depression using structured questionnaires from September 1 through 7, 2011. The collected data were analyzed by descriptive statistics, Chi-square test and logistic regression analysis using IBM SPSS Statistics V. 20. As a result of this study, 40.1% of the subjects showed cognitive decline and the factors related to their cognitive decline turned out to be the level of education (p<.001), age (p=.000), depression and exercise (p<.05). Therefore, intervention programs on depression or exercise should be implemented intensively and in particular, various programs and educations should be provided considering individual differences according to the level of education and age.