• 한국광학회:학술대회논문집
• /
• 한국광학회 1995년도 광학 및 양자전자학 워크샵 논문집
• /
• pp.11-17
• /
• 1995

반절연 InP를 전류 차단층으로 사용하는 초고속 변조 Distributed Feedback (DFB) 레이저의 다이오드를 제작 하였다. Grating이 형성된 InP 기판에 유기금속 증착법 (MOVPE)을 사용하여 다중 양자 우물 구조 성장 시켜 메사구조를 연성 한후, 전류 차단층으로 반절연 InP를 성장 하였다. 제작된 레이저 다이오드는 평균 문턱전류 10 mA, 기울기효율 14%이며, 30mA 구동 전류에서 10GHz 이상의 3dB 대역폭 특성을 보였다.

• 한국광학회지
• /
• 제14권4호
• /
• pp.454-459
• /
• 2003

단일 모드 광원이 집적된 Mach-Zehnder간섭계형 파장 변환기를 제작하여 세계 최초로 10 Gb/s에서 파장 변환 특성을 확인하였다. 제작된 파장 변환기는 수동 도파로 영역에서의 전파 손실을 줄이기 위해 undoped InP층이 수동 도파로 위에 형성된 새로운 BRS 구조를 사용하였다. 단일 모드 광원으로 손실 결합형 분포 궤환형 반도체 레이저(loss-coupled distributed feedback laser; LC-DFB LD)를 사용하여, 파장 변환기에 있는 반도체 광증폭기의 주입전류가 200 mA까지 측모드 억제율이 30 dB 이상의 값을 나타내었다. 제작된 LC-DFB LD 집적 파장 변환기는 10 Gb/s의 동적 파장 변환 특성 측정 결과, 7 dB 정도의 소광비를 갖는 eye 패턴을 얻을 수 있었으며, power penalty는 $10^{-9}$ bit error rate에서 2.8 dB의 값을 나타내었다.

• ETRI Journal
• /
• 제37권5호
• /
• pp.906-916
• /
• 2015

High-speed I/O channels require adaptive techniques to optimize the settings for filter tap weights at decision feedback equalization (DFE) read channels to compensate for channel inter-symbol interference (ISI) and crosstalk from multiple adjacent channels. Both ISI and crosstalk tend to vary with channel length, process, and temperature variations. Individually optimizing parameters such as those just mentioned leads to suboptimal solutions. We propose a joint optimization technique for crosstalk cancellation (XTC) at DFE to compensate for both ISI and XTC in high-speed I/O channels. The technique is used to compensate for between 15.7 dB and 19.7 dB of channel loss combined with a variety of crosstalk strengths from $60mV_{p-p}$ to $180mV_{p-p}$ adaptively, where the transmit non-return-to-zero signal amplitude is a constant $500mV_{p-p}$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권2호
• /
• pp.125-131
• /
• 2002

This paper presents MMIC drive and power amplifiers covering 6-18 ㎓. For simple wideband impedance matching and less sensitivity to fabrication variation, modified distributed topologies are employed in the both amplifiers. Cascade amplifiers with a self-biasing circuit through feedback resistors are used as unit gain blocks in the drive amplifier, resulting in high gain, high stability, and compact chip size. Self impedance matching and high-pass, low-pass impedance matching networks are used in the power amplifier. In measured results, the drive amplifier showed good return losses ($S_11,{\;}S_{22}{\;}<{\;}-10.5{\;}dB$), gain flatness ($S_{21}={\;}16{\;}{\pm}0.6{\;}dB$), and $P_{1dB}{\;}>{\;}22{\;}dBm$ over 6-18 GHz. The power amplifier showed $P_{1dB}{\;}>{\;}28.8{\;}dBm$ and $P_{sat}{\;}{\approx}{\;}30.0{\;}dBm$ with good small signal characteristics ($S_{11}<-10{\;}dB,{\;}S_{22}{\;}<{\;}-6{\;}dB,{\;}and{\;}S_{21}={\;}18.5{\;}{\pm}{\;}1.25{\;}dB$) over 6-18 GHz.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3326-3333
• /
• 2023

The results of the analysis of a mathematical modeling for the IBR-2M pulsed reactor dynamics for a transition from a power pulse repetition frequency of 5 Hz-10 Hz are presented. The change in the amplitude response of the reactor for variable pulse delayed neutron fraction was studied. We used a set of power feedback parameters determined experimentally in 2021 at an energy output of 1820 MW·day. At a pulse repetition frequency of 10 Hz, the amplitude of pulse energy oscillations significantly depends on the value of the delayed neutron fraction in pulse β_p. Depending on β_p both suppression and amplification of reactor power fluctuations in the frequency ranges of 0.05-0.20 and 1.25-5.00 Hz can be realized.

• 한국전자파학회논문지
• /
• 제21권3호
• /
• pp.262-268
• /
• 2010

본 논문에서, 부성 저항 특성을 갖는 능동 커패시턴스 회로를 이용한 고출력 능동 가변 대역 통과 여파기는 동축형 유전체 공진기와 버랙터 다이오드를 사용하여 설계하였으며, 셀룰러 TX, RX 대역을 모두 가변할 수 있도록 설계하였다. 능동 커패시턴스 회로의 직렬 피드백 구조는 가변 대역 통과 여파기의 버랙터 다이오드로부터 생기는 손실을 보상함과 동시에 고출력 특성을 갖도록 하기 위해 $P_{1dB}$가 32 dBm인 GaAs HFET을 사용하였다. 버랙터 다이오드는 고선형 특성을 갖도록 하기 위해 back-to-back 구조를 사용하였다. 제작된 2단 능동 가변 대역 통과 여파기는 셀룰러 대역인 800 MHz에서 900 MHz를 가변하며, 각각 25 MHz 대역폭으로 TX 대역 836 MHz에서 0.48 dB 삽입 손실 특성을 나타냈으며, RX 대역 881.5 MHz에서 0.39 dB 삽입 손실 특성을 나타내었다. $P_{1dB}$특성은 TX 및 RX 대역에서 각각 19.5 dBm과 23 dBm을 얻었다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.297-304
• /
• 2014

Due to the nonlinearity and complexity of the three-phase photovoltaic inverter, we propose an intelligent control based on fuzzy logic and the classical proportional-integral-derivative. The feedback linearization method is applied to cancel the nonlinearities, and transform the dynamic system into a simple and linear subsystem. The system is transformed from abc frame to dq0 synchronous frame, to simplify the state feedback linearization law, and make the close-loop dynamics in the equivalent linear model. The controls improve the dynamic response, efficiency and stability of the three-phase photovoltaic grid system, under variable temperature, solar intensity, and load. The intelligent control of the nonlinear characteristic of the photovoltaic automatically varies the coefficients $K_p$, $K_i$, and $K_d$ under variable temperature and irradiation, and eliminates the oscillation. The simulation results show the advantages of the proposed intelligent control in terms of the correctness, stability, and maintenance of its response, which from many aspects is better than that of the PID controller.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.352-361
• /
• 2013

Combining multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) with a massive number of transmit antennas (massive MIMO-OFDM) is an attractive way of increasing the spectrum efficiency or reducing the transmission energy per bit. The effectiveness of Massive MIMO-OFDM is strongly affected by the channel state information (CSI) estimation method used. The overheads of training frame transmission and CSI feedback decrease multiple access channel (MAC) efficiency and increase the CSI estimation cost at a user station (STA). This paper proposes a CSI estimation scheme that reduces the training frame length by using a novel pilot design and a novel unitary matrix feedback method. The proposed pilot design and unitary matrix feedback enable the access point (AP) to estimate the CSI of the signal space of all transmit antennas using a small number of training frames. Simulations in an IEEE 802.11n channel verify the attractive transmission performance of the proposed methods.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.351-361
• /
• 2016

Power quality is a critical issue in distribution systems, where a dynamic voltage restorer (DVR) is commonly used to mitigate the voltage disturbances for loads. This paper deals with a nonlinear control for the three-phase four-wire (3P-4W) DVR under a grid voltage unbalance and nonlinear loads in the distribution system, where a novel control scheme based on the feedback linearization technique is proposed. Through feedback linearization, a nonlinear model of a DVR with a PWM voltage-source inverter (VSI) and LC filters is linearized. Then, the controller design of the linearized model is performed by applying the linear control theory, where the load voltages are kept constant by controlling the d-q-0 axis components of the DVR output voltages. To keep the load voltage unchanged, an in-phase compensation strategy is employed, where the load voltages are recovered to be the same as the previous voltage without a change in the magnitude. With this strategy, the performance of the DVR becomes faster and more stable even under unbalanced source voltages and nonlinear loads. The validity of the proposed control strategy has been verified by simulation and experimental results.

• 한국산학기술학회논문지
• /
• 제11권10호
• /
• pp.3917-3922
• /
• 2010

본 논문은 U-band(40~60 GHz)대역에 최적화된 epitaxial로 pHEMT(Pseudomorphic High Electron Mobility Transistor)을 제작, 대신호 모델링하여 특성분석 및 60 GHz 대역의 3단 증폭기를 MMIC(Monolithic Microwave Integrated Circuit)로 설계 제작하였다. 본 논문에 사용된 pHEMT는 $0.12\;{\mu}m$의 게이트 길이와 총 게이트 면적 $100\;{\mu}m$, $200\;{\mu}m$를 사용하여 대신호 모델링하였으며 설계시 안정도의 향상을 위하여 부궤환회로와 함께 MIM(Metal-Insulator-Metal) 커패시터 대신 MCLF(Microstriop Coupled Line Filter)를 사용하여 안정도를 향상시켰다. 제작결과 크기가 $2.5{\times}1.5mm^2$이고 소모된 전류는 약 40 mA, 동작주파수 59.5 ~ 60.5 GHz에서 이득 19.9 dB ~ 18.6 dB, 입력정합특성 -14.6 dB ~-14.7 dB, 출력정합 특성 -11.9 dB ~-16.3 dB와 출력 -5 dBm의 특성을 얻었다.