• 한국농공학회지
• /
• 제31권3호
• /
• pp.93-102
• /
• 1989

With an objective to provide basic information for the management and the prediction of eutrophication in lentic water Systems, total amount of Kjeldahl nitrogen(T-N) and phosphorous(T-P) from irrigated water and drained water from flooded paddies were investigated during the rice growing period of 1988. A 29.3 ha paddies near Jungnam-myun, HwaSung-gun, Gyungi Province, Korea was instrumented for measuring runoff and sampling irrigated water and drained water from paddies. The following conclusions may be drawn from the result of this study. 1.During 115 days of investigation, T-N load for paddies was 362.6kg and T-P 63.44kg.These would be converted to 12.4kg T-N/ha and 2.17kg T-P/ha, respectively. 2.The T-N and T-P loadings in different periods showed a significant difference. The 25% of T-N loading was drained soon after fertilization period and 60% was drained during the rainy season from July 5 to July 24. 3.Annual loadings from paddies could be calculated to 30kg T-N/ha/year and 52kg T-P/ha/year considering non-measurement periods. 4.After the rainy season, the nutrient loads from drained water showed much less than those from irrigated water, and it may be suggested that the paddies would act as a stabilization pond. 5.The average concentrations of nutrients at 0.9km downstream from investigated paddies were 2.02(T-N) mg/l and 0.52(T-P) mg/I, which were 1.82(T-N) mg/l and 0.056(T-P)mg/l lower than those of drained water from paddies.

• 공업화학
• /
• 제19권4호
• /
• pp.432-438
• /
• 2008

Ru/C 촉매를 이용한 p-toluidine (TLD) 선택적 수소화 반응의 특성을 파악하기 위하여 반응 온도, 수소 압력, 촉매량, 반응용매 및 알카리 첨가제와 같은 공정변수들을 변화시켜가면서 반응속도와 생성물 분포에 미치는 영향을 조사하였다. TLD 수소화 반응에서 4-methylcyclohexylamine (MCHA)이 주된 생성물로 얻어졌으며 부반응물로는 bis(4-methyl cyclohexyl) amine (BMCHA)이 주로 생성되었다. MCHA는 온도와 압력의 증가에 따라 감소하였지만, 촉매량에 따라서는 증가함을 나타내었다. 용매의 변화에서는 isopropanol (IPA)에서 가장 좋은 선택도를 나타내었다. 이로부터 TLD 선택적 수소화에 대한 반응 기구를 제시하였다. 알카리염의 첨가는 BMCHA의 생성률을 낮게 하여 MCHA로의 선택도를 증가시켰으며 반응속도 또한 증가시켜주는 효과를 나타내었다.

• 한국지반공학회논문집
• /
• 제34권5호
• /
• pp.53-63
• /
• 2018

무리말뚝의 내진설계를 수행할 때 지반-말뚝 동적상호작용을 고려하는 것이 중요하다. 특히, 동적하중을 받는 무리말뚝의 횡방향 저항력은 무리말뚝 효과에 의하여 단일말뚝과 비교하여 감소한다. 그러나, 지금까지 지진하중을 받는 무리말뚝의 동적 무리말뚝 효과를 제안한 연구는 매우 부족한 실정이다. 그러므로, 본 연구에서는 건조 모래지반에 설치된 $3{\times}3$ 무리말뚝에 대한 동적 원심모형실험을 수행하여 무리말뚝 효과를 산정하였다. 이 무리말뚝 효과는 동적 p-y 곡선에서 극한 횡방향 지반반력과 지반반력계수에 대한 보정계수(multiplier)를 적용하여 고려하였다. 그리고, 본 연구에서 얻어진 동적 p-y 곡선을 Beam on Nonlinear Winkler Foundation 모델을 이용한 비선형 동해석에 적용하여 그 적용성을 검증하였다. 그 결과, 본 연구에서 제안한 무리말뚝의 보정계수가 원심모형실험 결과를 잘 모사할 수 있는 것으로 나타났다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.739-742
• /
• 2003

생분해성인 Curdlan을 이용하여 pH 의존성 약물 전달계 개발을 위한 실험을 수행한 결과, pH 1,4에서 약물 방출 보다 pH 7.4에서 약물 방출이 10배 이상 증가하였다. 이러한 결과로 curdlan acetate microsphere는 pH 의존성 약물 전달계로 유용하다고 판단된다.

• 대한치과보철학회지
• /
• 제42권6호
• /
• pp.664-670
• /
• 2004

Statement of problem. One of the common problems of dental implant prosthesis is the loosening of the screw that connects each component, and this problem is more common in single implant-supported prostheses with external connection. Purpose. The purpose of this study was to examine the changes of detorque values of abutment screws with external connection in different abutment heights. Materials and methods. After cyclic loading on three different abutment heights, detorque values were measured. Abutments were retained with titanium abutment screws tightened to 30 Ncm (30.5 kgmm) with digital torque gauge as recommended by the manufacturer. Replacing abutments, implants and titanium abutment screws with new ones at every measurement, initial detorque values were measured six times. In measuring de torque values after cyclic loading, Avana Cemented Abutments of 4.0 mm collar, 7.0 mm height (Osstem Co., Ltd., Seoul, Korea) were used with three different lengths of 5.0, 8.0, 11.0 mm. Shorter abutments were made by milling of 11.0 mm abutment to have the same force-exercised area of 4.5 mm diameter. Sine curve force (20N-320N, 14Hz) was applied, and detorque values were measured after cyclic loading of 2 million times by loading machine. Detorque values of initial and after-loading were measured by digital torque gauge. One-way ANOVA was employed to see if there was any influence from different abutment heights. Results. The results were as follows: 1. The initial detorque value was 27.8$\pm$0.93 kgmm, and the ratio of the initial detorque value to the tightening torque was 0.91(27.8/30.5). 2. Measured detorque values after cyclic loading were declined as the height of the abutment increased, that was, 5.0 mm; 22.3$\pm$0.82 kgmm, 8.0 mm; 21.8$\pm$0.93 kgmm, and 11.0 mm; 21.3$\pm$0.94 kgmm. 3. One-way ANOVA showed no statistically significant differences among these (p>0.05). 4. Noticeable mobility at the implant-abutment interface was not observed in any case after cyclic loading at all.

• 한국지반공학회지:지반
• /
• 제10권4호
• /
• pp.167-180
• /
• 1994

사전압밀된 포화점토의 응력이력이 2차압밀특성에 미치는 영향 및 Bjerrum모델이 과압밀점토의 2차압밀침하추정에 적용가능한지를 실험적으로 파악하기 위하여 재성형점토를 이용하여 재하-제하 및 재하-제하-재재하 응력이력의 조건에서 일련의 장기압밀시험을 실시하였다. 실험결과에 의하면 과압밀점토의 2차압밀침하는 전반부에서 응력이력의 영향을 받고 전반부의 2차압밀계수 Cn은 OCR(선행 압밀하중 Pcy재재하하중 Pr), 최대 OCR(선행압밀하중 Pcy제 하시의 하중 Pu)과,제하시간에 의존하며 과압밀비 증가에 따라 감소한다. 또한 2차압밀후반부 의 2차압밀계수 C.2는 OCR의 영향을 받으며 과압밀비 증가에 따라 감소한다. 최종적으로 실험 결과와 Bjerrum모델을 비교분석한 결과 임의 응력이력범위를 벗어나면 과압밀점토에서 Bjerrum모델의 적용은 가능하다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.660-664
• /
• 2000

UK-58,852의 생합성에 관여하는 유전자를 분리하기 위해 Actinomadura roseorufa의 genomic DNA와 E. coli-Streptomyces shuttle cosmid vector인 pOJ446이 genomic library를 만들었다. Genomic library는 dehydratase PCR product와 eryA 유전자를 probe로 하여 sugar 생합성 유전자와 polyketide typel 유전자가 집단으로 존재하는 cosmid pHD54를 분리하였고, 이를 제한 효소인 BamHI, SmaI와 Sonicater를 이용해서 subcloning 하였다. 이들의 염기서열을 부분 분석한 결과, polyketide 생합성에 관여하는 ketoacyl synthase, methylmalonyl acyltransferase, ketoreductase, enolreductase 그리고 PKS loading domain 등 polyketide synthase type I 임을 보여주고 있고, BLAST 분석된 결과를 보면 polyketide synthase 유전자는 rifamycin 생합성 유전자와 유사성이 높다. 그리고 sugar 생합성에 관여하는 유전자로는 oxidoreductase, dTDP-D-glucose 4,6 dehydratase, dTDP-D-glucose synthase 그리고 dTDP-4-keto-6-deoxy-D-glycose 3,5-epimerase으로 구성된 gene cluster를 확인하였다. 그리고 염기서열 분석된 유전자중 dTDP-D-glucose synthase를 발현하여 유전자의 기능을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.315-325
• /
• 2018

This paper predicts the flexural behaviour of reinforced concrete (RC) beams strengthened with a precast strip of ultra-high performance fiber-reinforced concrete (UHPFRC). In the first phase, ultimate load capacity of preloaded and strengthened RC beams by UHPFRC was predicted by using various analytical models available in the literature. RC beams were preloaded under static loading approximately to 70%, 80% and 90% of ultimate load of control beams. The models such as modified Kaar and sectional analysis predicted the ultimate load in close agreement to the corresponding experimental observations. In the second phase, the famous fatigue life models such as Papakonstantinou model and Ferrier model were employed to predict the number of cycles to failure and the corresponding deflection. The models were used to predict the life of the (i) strengthened RC beams after subjecting them to different pre-loadings (70%, 80% and 90% of ultimate load) under static loading and (ii) strengthened RC beams after subjecting them to different preloading cycles under fatigue loading. In both the cases precast UHPFRC strip of 10 mm thickness is attached on the tension face. It is found that both the models predicted the number of cycles to failure and the corresponding deflection very close to the experimental values. It can be concluded that the models are found to be robust and reliable for cement based strengthening systems also. Further, the Wang model which is based on Palmgren-Miner's rule is employed to predict the no. of cycles to failure and it is found that the predicted values are in very good agreement with the corresponding experimental observations.

• Environmental Engineering Research
• /
• 제11권3호
• /
• pp.134-142
• /
• 2006

The treatment of high-strength swine wastewater by anaerobic digestion combined with an aquatic plant system was investigated. Anaerobic digestion of swine wastewater gave volatile solids (VS) removal efficiencies of 43.3%, 52.1% and 54.5% for hydraulic retention times (HRTs) of 20, 30, 40 days, respectively. The removal efficiencies of VS, total chemical oxygen demand (TCOD) and soluble chemical oxygen demand (SCOD) decreased with increasing VS volumetric loading rate (VLR). Higher organic removal efficiency was observed at longer HRTs for the same VS volumetric loading rate. As VS volumetric loading rate increased, biogas production increased and the methane content of the biogas decreased. Experiments using duckweed (Lemna species) as an aquatic macrophyte gave the following results. In the case of nitrogen, removal efficiency was above 60% and effluent concentration was below 10.0 mg/L when the influent ammonia-N loading was about $1.0\;g/m^2/day$. In the case of phosphorus, removal efficiency was above 55% and effluent concentration was below 2.0 mg/L when the influent $PO_4$-P loading was about $0.15\;g/m^2/day$. In addition, crude protein and phosphorus content of duckweed biomass increased from 15.6% to 41.6% and from 0.8% to 1.6%, respectively, as the influent nutrient concentration increased. The treatment of high-strength swine wastewater by anaerobic digestion combined with an aquatic plant system offers good performance in terms of organics and nutrient removal for relatively low operation and maintenance costs. The results indicate that under appropriate operational conditions, the effluent quality is within the limits set by Korean discharge criteria.

• The Journal of Advanced Prosthodontics
• /
• 제14권2호
• /
• pp.70-77
• /
• 2022

PURPOSE. This study evaluated screw loosening and 3D crown displacement after cyclic loading of implant-supported incisor crowns cemented with original titanium bases or with three compatible, nonoriginal components. MATERIALS AND METHODS. A total of 32 dental implants were divided into four groups (n = 8 each): Group 1 used original titanium bases, while Groups 2-4 used compatible components. The reverse torque value (RTV) was evaluated prior to and after cyclic loading (1,200,000 cycles). Samples (prior to and after cyclic loading) were scanned with a microcomputed tomography (micro-CT). Preload and postload files were superimposed by 3D inspection software, and 3D crown displacement analysis was performed using root-mean-square (RMS) values. All datasets were analyzed using one-way ANOVA and Tukey's post hoc analysis. RESULTS. Significant variations were observed in the postload RTV, depending on the titanium base brand (P < .001). The mean postload RTVs were significantly higher in Groups 1 and 2 than in the other study groups. While evaluating 3D crown displacement, the lowest mean RMS value was shown in the original Group 1, with the highest RMS value occurring in Group 4. CONCLUSION. Within the limitations of this in vitro study and under the implemented conditions, it was concluded that the manufacturer brand of the titanium base significantly influenced screw loosening following the fatigue test and influenced 3D crown displacement after cyclic loading.