• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.208-216
• /
• 2004

Advanced overload protection module for full scale airframe structural test was developed by improving the existing overload protection module. When performing the full scale airframe structural test, overload can be applied to the test article due to unexpected situations such as system shutdown, test article failure, and deficiency of design strength. Therefore, the overload protection module is needed for protecting the test article in unexpected overload situations. In this paper, the function of the existing overload protection module was summarized for each component and the problems encountered when using it in structural test were analyzed in addition, the development of advanced overload protection module was described.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.339-344
• /
• 2019

In this paper, a digital home electric overload alarm system based on DSP for smart home automation which can minimize electrical fire damage caused by an home electrical overload was made experimentally. To verify the validity of the home electrical overload alarm technology, an electric overload alarm performance evaluation system which can artificially generate the electrical overloads was designed, developed, and constructed, and the effectiveness of the overload alarm developed by the overload test was verified. In particular, an overload test EMTP model based on EMTP-RV was developed, and simulation and measurement results obtained from the overload test were compared, and the reliability of overload performance verification results was confirmed.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.96-104
• /
• 1992

Aircraft structures and engineering structures are always subject to variable amplitude loads. Variable amplitude loads include some kind of loading history; for example, constant amplitude load, single peak overload and block overload etc. Crack growth under variable amplitude loading exhibits retardation effect. In this study, the 4 point bending fatigue test was performed by hydrolic servo fatigue testing machine on 7075-T6 Al-alloy. The retardation effect of overload ratio and numbers of overload cycle was quantitatively studied. 1) Change of retardation effect against increment of overload ratio is more evident when the multiple overload is applied than single overload is done. 2) The number of overload cycle is very important factor about the crack growth retardation effect when the overload ratio is more than 1.75; that is not when the overload ratio is less than 1.75. 3) Overload affected zone size increased gradually by increment of crack growth retardation effect. 4) Crack driving force is more greatly reduced when the crack tip branched off two direction than it sloped to one direction.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.9
• /
• pp.513-520
• /
• 2004

In the paper, we summarize the result of the experimental research for the overload criteria of domestic distribution transformers considering the electric consumption patterns of customers. For the basic characteristic data of distribution transformer overload, the actual experiments are accomplished. The field data of loads are surveyed from sample transformers for analyzing the consumption pattern of customer load. The load data acquisition devices are equipped, and the algorithm of load pattern classification is applied. In addition to this efforts, various load pattern data. in past are gathered. Then the representative load pattern of each customer type in domestic is extracted. The final results of overload criterions are presented as tabular form through the results of experiments and survey are combined. The field test of the experiment results is peformed using the special manufactured transformers, which can measure both the load and top-oil temperature of transformer. Through this, we verify that the results of field test are similar to the laboratory one and the Proposed overload criteria can be effectively applied to the real system.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.1
• /
• pp.81-89
• /
• 2022

Since the competitive environment, work overload among employees has been increasing. The purpose of this paper is to investigate the impact of work overload on safety behavior and its intermediating mechanisms. In specific, this paper delves into the mediating effect of job stress, as well as the moderating effect of job crafting in the association between work overload and job stress. To empirically test the hypotheses, this study utilized survey data from 168 Korean employees by conducting structural equation modeling(SEM) analysis. The results demonstrated that work overload has a positive (+) influence on job stress, which has a negative (-) influence on safety behavior. Moreover, job stress mediated the association between work overload and safety behavior. Furthermore, job crafting moderated the work overload-safety behavior link.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.161-169
• /
• 2004

In this study, we investigated fatigue crack growth behavior of laser welded sheet metal due to a single overload. Fatigue specimens were made using butt joint of cold rolled sheet metal that was welded by $CO_2$ laser. The fatigue crack propagation tests were performed in such a way that fatigue loading was parallel to the weld line while crack propagation was perpendicular to the weld line. Single overload was applied when fatigue crack tip was arrived near the weld line. The distances between the crack tip and the weld line at which a single overload was applied were 6, 4 and 2mm. The effect of specimen thickness and overload ratio on the fatigue behavior was determined. The plastic zone size of crack tip due to the single overload was determined from the finite element analysis. For investigating fatigue crack growth behavior, we used different thickness specimen 0.9mm and 2.0mm, and variable overload ratio applied fatigue crack propagation test. Also we used finite element analysis for investigating the plastic zone size of crack tip when single overload applied

• The Journal of Information Systems
• /
• v.25 no.4
• /
• pp.163-179
• /
• 2016

Purpose This study investigates the associations between SNS fatigue and stress of smartphone SNS, with SNS characteristics. The study focuses on two types of SNS characteristics: information and systems characteristics. We examine SNS stress factors that includes the communication and system overload. Design/methodology/approach To test the proposed hypotheses, the study conducted structural equation modeling with Smart PLS 3.0. The study conducted A sample of 286 participants was collected from SNS users. Findings The results indicated that the information relevance in the information characteristics had an effect on the communication overload, but it had not an effect on the system overload. The information accuracy had an effect on the communication and system overload. The app pace of change influenced the communication and system overload, but the app complexity influenced the system overload. Finally, the SNS stress showed significant relationship with SNS fatigue. The academic and managerial implications were discussed based on the this results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1605-1614
• /
• 1992

The effects of % overload (% O.L), baseline stress intensity factor range (.DELTA. $K_{b}$) and dimension-less crack depth (a/W) are examined for the retardation behaviors after a single overload and high-low block loads in 7075-T73 aluminum alloy. And wheeler model, which is one of the fatigue life prediction models, is modified to predict retardation life using these test results. The retardation cycles( $N_{d}$) increased with a decrease in a/W and an increase in % O.L. and (.DELTA. $K_{b}$) These effects are more severe after high-low block loads than single overload. In the case of single overload, the main mechanisms of the retardation are the crack closure and the relaxation of K due to crack branching. But in the case of high-low block loads, that of the main mechanism is the crack closure caused by the accumulated compressive residual stree at the crack tip, which is related with the contact of fracture surfaces. Test results were multiple regression analyzed and got regressed shaping correction factors, (n)$_{REG}$, as function of %O.L., a/W and (.DELTA. $K_{b}$) Wheeler model is modified by using these (n)$_{REG}$. The number of delay cycles calculated by modified Wheeler model were in good agreement with the test results of this study.y.udy.y.y.y.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.3
• /
• pp.179-184
• /
• 2017

Recently, traffic accidents and damage on the highway have increased because of overloaded vehicles. The existing overload-detecting system has a low accuracy rate. An overload-detecting system using a weigh-in-motion (WIM) system has been developed to solve this problem. The WIM system can be used to detect overloaded vehicles by measuring the weight of the vehicles. The WIM system is divided into high-speed and low-speed types. The inaccuracy rate in the low-speed WIM system results mainly from the low response rate of the sensor when the velocity is moving at more than 20 km/h. In this study, a low-speed overload-detecting pad with a hydraulic structure using a WIM system was developed to make the system more accurate. The structural and formal analysis was carried out by using a finite element method (FEM) in order to analyze the structural stability and the extrusion velocity of the system. In addition, a static load test was performed to confirm the linearity and accuracy of the pad.

• Advanced Industrial SCIence
• /
• v.3 no.3
• /
• pp.20-28
• /
• 2024

This study aimed to verify the mediating effect of job burnout on the relationship between work overload and turnover intention among IT workers. For this study, a sample of 499 IT workers completed the online questionnaires: job demand scale, job burnout(emotional exhaustion, cynicism, professional efficacy) scale, turnover intention scale. The collected data were statistically analyzed using SPSS 25.0, and the Sobel test was conducted to verify the mediating effect. The results showed that work overload had a significant positive correlation with emotional exhaustion, cynicism, and turnover intention. Work overload had significant positive effects on emotional exhaustion and turnover intention. The full mediating effect of emotional exhaustion on the relationship between work overload and turnover intention was verified. Based on the findings, we discussed the necessity of addressing emotional exhaustion to prevent issues related to work overload and turnover intention among IT workers. Finally, we proposed human resource management strategies to address job burnout in IT workers and suggested directions for future research.