• Journal of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.538-547
• /
• 1986

The 8 rare earth elements were determined in the monazite concentrates by X-ray fluorescence spectrometry. The spectral line overlapping interferences from the other elements were investigated and the correction methods of interferences were studied using line overlap coefficients. The coefficients were calculated from the ratios of the intensities measured at the diffracted angle (2${\theta}$) of the analytical lines of other elements to the intensity of pure rare earth oxide. The coefficients were used to correct the line overlaps by a regression analysis. The linearities of calibration curves from the corrected intensities were remarkably improved, and their standard deviations were decreased. The analytical results agreed with that of the inductively coupled plasma(ICP) spectrometry within an allowable error range.

• Journal of Korean Philosophical Society
• /
• v.143
• /
• pp.1-26
• /
• 2017

Wright wants to create a democratic egalitarian society through his real utopias project where everyone is guaranteed the access to material and social means or opportunities for human flourishing and where democracy is maximized. However, he does not provide a convincing rationale for his democratic egalitarianism. This paper shows that the basic income derived from the equal rights to commons can be a convincing basis for his democratic egalitarianism. This paper then restructures his real utopias project into a more consistent system based on the basic income derived from commons. It also argues that Wright's vision of Real Utopias overlaps with the vision of a 'sharing society', a 'society based on democratically managed and controlled commons and basic income'. This article therefore argues that the Real Utopias Project and the basic income project can on the one hand develop based on these overlaps and correlations and on the other, based on each other's results.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1503-1510
• /
• 2011

The dropper length calculation method about the normal same encumbrance spans is well known independent to whether the pre-sag is given or not. But, the dropper length calculation method for the elevating span which consists in the end area of a tensioning section and normally consists with overlaps is not well known. In this study, firstly, we investigate the dropper length calculation method about the elevating span whether the insulator is contained in or not, we also recognize the effect of dropper length due to the change of the take-off point. Secondly, we very this calculation method with a catenary sample data and check again with Gyeongbu HSL design data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2948-2966
• /
• 2014

To promote recommendation services through prediction quality, some privacy-preserving collaborative filtering solutions are proposed to make e-commerce parties collaborate on partitioned data. It is almost probable that two parties hold ratings for the same users and items simultaneously; however, existing two-party privacy-preserving collaborative filtering solutions do not cover such overlaps. Since rating values and rated items are confidential, overlapping ratings make privacy-preservation more challenging. This study examines how to estimate predictions privately based on partitioned data with overlapped entries between two e-commerce companies. We consider both user-based and item-based collaborative filtering approaches and propose novel privacy-preserving collaborative filtering schemes in this sense. We also evaluate our schemes using real movie dataset, and the empirical outcomes show that the parties can promote collaborative services using our schemes.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.6
• /
• pp.701-706
• /
• 2007

The measurement accuracy for heart rate or $SpO_2$ using photoplethysmography (PPG) is influenced by how well the noise from motion artifacts and other sources can be removed. Eliminating the motion artifacts is particularly difficult since its frequency band overlaps that of the basic PPG signal. Therefore, we propose the Periodic Moving Average Filter (PMAF) to remove motion artifacts. The PMAF is based on the quasi-periodicity of the PPG signals. After segmenting the PPG signal on periodic boundaries, we average the $m^{th}$ samples of each period. As a result, we remove the motion artifacts well without the deterioration of the characteristic point.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.405-408
• /
• 2002

Because of superior division among sub-channels, DWT MC-CDMA is less interference with neighborhood channel. In our newly proposed multi-carrier CDMA data transmission method, lIR CMFB filter banks sharply divide sub-bands and reduces spectral overlaps among neighboring sub-channels. In experiment result, proposed filter is better ability of sub-band division than FIR filter. Since the proposed cosine modulated filter banks lIR filter having wavelet property is designed to response sharp transition band, the ISI and ICI between neighboring sub-channels can be effectively reduced. And robustness about narrow band interference of CMFB IIR MC-CDMA almost same FIR DWT MC-CDMA.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1111-1118
• /
• 2003

We present one-color nonlinear wavepacket interferometry (WPI) signal calculations for a system of two electronic levels and one vibrational degree of freedom. We consider two cases, a displaced harmonic oscillator system, which can be treated analytically, and a model photodissociative system, whose WPI signal must be calculated by numerical wavepacket propagation. We show how signals obtained with different combinations of intrapulse-pair phase shifts can be combined to isolate the complex-valued overlap between a given onepulse target wavepacket and a variable three-pulse reference wavepacket. We demonstrate that with a range of inter- and intrapulse-pair delays the complex overlaps and variable reference states can be used to reconstruct the target wavepacket. We compare our results with previous methods for vibronic state reconstruction based on linear WPI and discuss further generalizations of our method.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.46-55
• /
• 2004

While transparency in general refers to the structure that is optically luminant or pleasant in its lightness, it is often synonymous with the concept of "modernistic." The advancement in construction and design technologies and the development of new materials with versatility adds even further diversity to transparency in architectural expression. The purpose of this study is to analyze various conceptions about transparency effects by comparing diverse expressions of visual lightness effects in space design. For this, I categorize and exemplify visual lightness effects of space applied to transparent materials. I argue that by utilizing transparent materials, the perception of space as well as boundaries between exterior and interior can be profoundly transformed. Space that overlaps through transparent boundaries creates atmosphere which deepens the architectural space environments.ironments.

• Industrial Engineering and Management Systems
• /
• v.16 no.1
• /
• pp.141-153
• /
• 2017

A binary integer programming model is proposed for a complex timetabling problem in a university faculty which conducts various degree programs. The decision variables are defined with fewer dimensions to economize the model size of large scale problems and to improve modeling efficiency. Binary matrices are used to incorporate the relationships between the courses and students, and the courses and teachers. The model includes generally applicable constraints such as completeness, uniqueness, and consecutiveness; and case specific constraints. The model was coded and solved using Open Solver which is an open-source optimizer available as an Excel add-in. The results indicate that complicated timetabling problems with large numbers of courses and student groups can be formulated more efficiently with fewer numbers of variables and constraints using the proposed modeling framework. The model could effectively generate timetables with a significantly lower number of work hours per week compared to currently used timetables. The model results indicate that the particular timetabling problem is bounded by the student overlaps, and both human and physical resource constraints are insignificant.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.11
• /
• pp.144-153
• /
• 2007

In order to generate the input data for rapid prototyping, a new approach which is based on the implicit surface interpolation method is presented. In the method a surface is reconstructed by creating smooth implicit surface from unorganized cloud of points through which the surface should pass. In the method an implicit surface is defined by the adaptive local shape functions including quadratic polynomial function, cubic polynomial function and RBF(Radial Basis Function). By the reconstruction of a surface, various types of error in raw STL file including degenerated triangles, undesirable holes with complex shapes and overlaps between triangles can be eliminated automatically. In order to get the slicing data for rapid prototyping an efficient intersection algorithm between implicit surface and plane is developed. For the direct usage for rapid prototyping, a robust transformation algorithm for the generation of complete STL data of solid type is also suggested.