• Title/Summary/Keyword: Overlapped

Search Result 1,391, Processing Time 0.026 seconds

Applicability Evaluation of Multi Beam Echo Sounder for Inland Water (다중빔 음향측심기의 내수면 적용성 평가)

  • Jung, Jin Woo;Cho, Kwang Hee;Hong, Seung Seo
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.36 no.6
    • /
    • pp.629-639
    • /
    • 2018
  • In this study, the application of the single beam echosounder and multi beam echosounder was analyzed for the Youngsan river, from the Juksanbo to the Juksan bridge, length of 840m, width 230m and area $0.16km^2$. A single beam echosounder and a multi beam echosounder are mounted on an USV (Unmanned Surface Vessel), and each data is acquired. Then, TIN (Triangular Irregular Network) is created and the grid depth of 10m intervals is extracted. The grid depth of the single beam echo sounder and the grid depth of the multi beam echo sounder were overlapped to compare the two data. As a result of analysis using 5,024 data, the mean depth difference was 0.0319m and the standard deviation was 2.4095m. The river bed shape was similar to each other. If the multi-beam echo sounder is regarded as the standard, the volume difference of the stream is $161,882m^3$. With a multi-beam echo sounder installed, the operating distance increased by approximately 55% to 4595.85m, and the operating time increased by approximately 59% to approximately 47%.

A Study on the Resistivity Structure in Central Myanmar Basin using DC Resistivity and Magnetotellurics (전기비저항 탐사와 자기지전류 탐사 자료를 이용한 미얀마 중앙분지 전기비저항 구조 연구)

  • Noh, Myounggun;Lee, Heuisoon;Ahn, Taegyu;Jang, Seonghyung;Hwang, InGul;Lee, Donghoon;Hwang, Seho
    • Geophysics and Geophysical Exploration
    • /
    • v.22 no.2
    • /
    • pp.62-71
    • /
    • 2019
  • We conducted DC resistivity and MT survey to obtain the resistivity structure of the central Myanmar basin. We tried to analyze the underground structure through the resistivity variation of Myanmar by performing representative geophysical survey methods because researches on the electrical resistivity structure are insufficient in Myanmar. The electrical resistivity is expected to be low considering the marine sedimentary rocks composed of shale and sandstone in this area. The DC resistivity and MT survey were carried out using SmartRho of Geolux Co., Ltd. and MTU-5A of Phoenix geophysics Ltd., respectively, to visualize the electrical resistivity structure of study area. DC resistivity and MT survey showed an electrical resistivity less than dozens of ohm-m within the depth of 100 m. In particular, MT survey data were almost similar to TM and TE modes in the frequency range above 1 Hz. The two-dimensional inversion of MT data showed a subsurface structure with low resistivity below 150 ohm-m divided into east-west direction. We confirmed that the inversions of DC resisitivity and MT data along an overlapped survey line represented similar results. In the future, considering the high electrical conductivity, it would be effective to perform DC resistivity and MT survey simultaneously to study the electrical resistivity structure of the central Myanmar basin.

Typhoon-Surge Characteristics and the Highest High Water Levels at the Western Coast (서해안의 태풍해일특성과 고극조위)

  • Kang, Ju Whan;Kim, Yang-Seon
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.31 no.2
    • /
    • pp.50-61
    • /
    • 2019
  • The aspects of typhoon-induced surges were classified into three types at the Western coast, and their characteristics were examined. The typhoons OLGA (9907) and KOMPASU (1007) were the representative steep types. As they pass close to the coasts with fast translation velocity, the time of maximum surge is unrelated to tidal phase. However, typhoons PRAPIROON (0012) and BOLAVEN (1215) were the representative mild types, which pass at a long distance to the coasts with slow translation velocity, and were characterized by having maximum surge time is near low tide. Meanwhile, typhoons MUIFA (1109) and WINNIE (9713) can be classified into mild types, but they do not show the characteristics of the mild type. Thus they are classified into propagative type, which are propagated from the outside. Analyzing the annual highest high water level data, the highest water level ever had been recorded when the WINNIE (9713) had attacked. At that time, severe astronomical tide condition overlapped modest surge. Therefore, if severe astronomical tide encounter severe surge in the future, tremendous water level may be formed with very small probability. However, considering that most of the huge typhoons are mild type, time of maximum surge tends to occur at low tide. In case of estimating the extreme water level by a numerical simulation, it is necessary not only to apply various tide conditions and accompanying tide-modulated surge, but also to scrutinize typhoon parameters such as translation velocity and so on.

A Study on the Deriving of Areas of Concern for Crime using the Mental Map (멘탈 맵을 이용한 범죄발생 우려 지역 도출에 관한 연구)

  • Park, Su Jeong;Shin, Dong Bin
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.37 no.3
    • /
    • pp.177-188
    • /
    • 2019
  • Recently, citizens are feeling anxious as 'Motiveless Crime' increases. The quality of citizens life is degraded and the degree of crime fear is increasing. In this study, based on various variables related to crime other than actual crime occurrence status, crime occurrence points (point line polygon) felt by citizens are created by using mental map methodology. And the purpose of this study is to derive the area of concern for crime through spatial overlap analysis using kernel density estimation analysis. It also uses spatial overlay analysis using kernel density estimation to derive areas of concern for crime occurrence. As a result, the local residents' request point and the areas of concern for crime were overlapped. In addition, the mental map indicating the fear of crime was constructed by mapping mainly the areas between the facilities, the non-construction area such as the narrow area, the security CCTV, the streetlight. This study is meaningful in that it tried to derive a crime occurrence concern area by using mental map method unlike the previous study related to crime. The results of this study, such as mental map, could be used in various fields such as construction of fragile crime map, guideline of crime prevention through environment design.

A Study on the Tian-Ren relations theory of Wang chong (왕충(王充)의 천인관계론(天人關係論) 연구(硏究))

  • Cho, Won-il
    • The Journal of Korean Philosophical History
    • /
    • no.37
    • /
    • pp.135-157
    • /
    • 2013
  • The Tian-Ren Relations theory was prevalent in Han period. People says that after this, in the West Han period, Dong zhong shu systematized the theory. In his Tian-Ren Relations theory, the various characters of Ren & Tian has same structure by personifying Tian and Nature. Wang chong's Tian-Ren Relations theory is not only very a critique on the Tian-Ren response theory in West Han period, but also a basis of his own thought-system. At that time, the social consciousness form was already the modified Tian-Ren response theory. But Wang chong sharply criticized it, because he thought that Tian-Ren response theory is very falsehood. Critique of Wang chong has two aspect, One is truth and falsehood judgement in empirical fact of human about the Tian-Ren response theory. The other is right and wrong judgement in value of human & society about the Tian-Ren response theory. The different meanings are always overlapped each other or appeared at the same time in critique of Wang chong In this paper will be research on this Tian-Ren relations theory of Wang chong, his critique on Tian-Ren response theory and the meaning of human-being on his theory.

Causes of Weakening Tree Vigor of Pinus thunbergii in Hanbando Coastal Forest in Shinangun, Jeollanamdo Province (전남 신안군 한반도해송숲의 곰솔 수세약화 원인 분석)

  • Kim, Sun-Hwa;Park, Seo-Gon
    • Korean Journal of Environment and Ecology
    • /
    • v.35 no.4
    • /
    • pp.398-407
    • /
    • 2021
  • This study intended to identify causes of poor tree vigor in the Hanbando coastal forest by investigating its geographical environment, climate condition, soil physicochemical characteristics, and growth condition of Pinus thunbergii. It divided the forest into an area with poor tree vigor or dead standing trees and a control area with good tree vigor and examined them separately. The survey showed that stand density was significantly higher in the area with poor tree vigor. In contrast, the crown width in the area with good tree vigor was wider. The number of dead standing trees and the stand density showed a negative correlation. The stand density and diameter at breast height (DBH), tree height, crown height, and crown width also showed a negative correlation. The result indicated that, as the tree's stand density increases, the crowns of individual trees overlapped and the lower branches died. Then crown height and crown width decreased, and the number of leaves and photosynthesis was reduced, leading to lower tree height and weaker growth of breast diameter. As a result, tree vigor weakened, and combined with environmental pressures from the lack of moisture and nutrients in coastal soil and salty wind, P. thunbergii in coastal areas is expected to die massively. Although the causes of dead standing trees and poor tree vigor of P. thunbergii in the Hanbando coastal forest are complicated, poor management of adequate tree density in response to the growth of P. thunbergii is the primary cause. The secondary cause is external environmental pressures, including unfavorable soil conditions and salty and strong wind that obstruct the growth of P. thunbergii.

Trend Analysis of Fraudulent Claims by Long Term Care Institutions for the Elderly using Text Mining and BIGKinds (텍스트 마이닝과 빅카인즈를 활용한 노인장기요양기관 부당청구 동향 분석)

  • Youn, Ki-Hyok
    • Journal of Internet of Things and Convergence
    • /
    • v.8 no.2
    • /
    • pp.13-24
    • /
    • 2022
  • In order to explore the context of fraudulent claims and the measures for preventing them targeting the long-term care institutions for the elderly, which is increasing every year in Korea, this study conducted the text mining analysis using the media report articles. The media report articles were collected from the news big data analysis system called 'BIG KINDS' for about 15 years from July 2008 when the Long-Term Care Insurance for the Elderly took effect, to February 28th 2022. During this period of time, total 2,627 articles were collected under keywords like 'elderly care+fraudulent claims' and 'long-term care+fraudulent claims', and among them, total 946 articles were selected after excluding overlapped articles. In the results of the text mining analysis in this study, first, the top 10 keywords mentioned in the highest frequency in every section(July 1st 2008-February 28th 2022) were shown in the order of long-term care institution for the elderly, fraudulent claims, National Health Insurance Service, Long-Term Care Insurance for the Elderly, long-term care benefits(expenses), elderly care facilities, The Ministry of Health & Welfare, the elderly, report, and reward(payment). Second, in the results of the N-gram analysis, they were shown in the order of long-term care benefits(expenses) and fraudulent claims, fraudulent claims and long-care institution for the elderly, falsehood and fraudulent claims, report and reward(payment), and long-term care institution for the elderly and report. Third, the analysis of TF-IDF was similar to the results of the frequency analysis while the rankings of report, reward(payment), and increase moved up. Based on such results of the analysis above, this study presented the future direction for the prevention of fraudulent claims of long-term care institutions for the elderly.

Calibration of Thermal Camera with Enhanced Image (개선된 화질의 영상을 이용한 열화상 카메라 캘리브레이션)

  • Kim, Ju O;Lee, Deokwoo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.4
    • /
    • pp.621-628
    • /
    • 2021
  • This paper proposes a method to calibrate a thermal camera with three different perspectives. In particular, the intrinsic parameters of the camera and re-projection errors were provided to quantify the accuracy of the calibration result. Three lenses of the camera capture the same image, but they are not overlapped, and the image resolution is worse than the one captured by the RGB camera. In computer vision, camera calibration is one of the most important and fundamental tasks to calculate the distance between camera (s) and a target object or the three-dimensional (3D) coordinates of a point in a 3D object. Once calibration is complete, the intrinsic and the extrinsic parameters of the camera(s) are provided. The intrinsic parameters are composed of the focal length, skewness factor, and principal points, and the extrinsic parameters are composed of the relative rotation and translation of the camera(s). This study estimated the intrinsic parameters of thermal cameras that have three lenses of different perspectives. In particular, image enhancement based on a deep learning algorithm was carried out to improve the quality of the calibration results. Experimental results are provided to substantiate the proposed method.

The Role of Proximity in the Internalization of Corporate Social Responsibility: Lessons from the U.S Corporations' Participation in the B-Corp Movement (기업의 사회적 책임 확산과정에서의 근접성의 역할: 미국 기업들의 비콥 무브먼트 참여과정을 중심으로)

  • Lee, Jiun;Lee, Yeowon;Kim, Sang-Joon
    • Korean small business review
    • /
    • v.43 no.2
    • /
    • pp.31-57
    • /
    • 2021
  • This study delves into a question as to how the concept of corporate social responsibility (CSR) is internalized across corporations. CSR internalization refers to the process where a corporation incorporates CSR practices into its business practices. Drawn from the institutionalization process of knowledge adoption under environmental pressure, we pay attention to the roles of proximity, defined as the distance between environmental characteristics and organizational characteristics of corporations. And we argue that the extent to which a given firm is situated in the environment knowledgeable will make the firm likely to adopt CSR practices. To test this idea, we figure out when and how corporations participate in the B-Corporation Movement in the U.S., through the lens of proximity. Specifically, we subdivide proximity into geographical proximity, organizational proximity, and overlapped proximity and examine whether proximity can increase the likelihood of adopting CSR practices. With a sample of 536 start-ups which had participated in the B-Corporation Movement between 2007 and 2017, we find that the three types of proximity consistently increase the likelihood of becoming a certified B-Corp. This suggests that a corporation is highly likely to accept the concept of CSR under external pressures, along with its intrinsic motivation, which provide theoretical and practical implications on CSR internalization.

Fabrication of Three-Dimensional Scanning System for Inspection of Mineshaft Using Multichannel Lidar (다중채널 Lidar를 이용한 수직갱도 조사용 3차원 형상화 장비 구현)

  • Soolo, Kim;Jong-Sung, Choi;Ho-Goon, Yoon;Sang-Wook, Kim
    • Tunnel and Underground Space
    • /
    • v.32 no.6
    • /
    • pp.451-463
    • /
    • 2022
  • Whenever a mineshaft accidentally collapses, speedy risk assessment is both required and crucial. But onsite safety diagnosis by humans is reportedly difficult considering the additional risk of collapse of the unstable mineshaft. Generally, drones equipped with high-speed lidar sensors can be used for such inspection. However, the drone technology is restrictively applicable at very shallow depth, failing in mineshafts with depths of hundreds of meters because of the limit of wireless communication and turbulence inside the mineshaft. In previous study, a three-dimensional (3D) scanning system with a single channel lidar was fabricated and operated using towed cable in a mineshaft to a depth of 200 m. The rotation and pendulum movement errors of the measuring unit were compensated for by applying the data of inertial measuring unit and comparing the similarity between the scan data of the adjacent depths (Kim et al., 2020). However, the errors grew with scan depth. In this paper, a multi-channel lidar sensor to obtain a continuous cross-sectional image of the mineshaft from a winch system pulled from bottom upward. In this new approach, within overlapped region viewed by the multi-channel lidar, rotation error was compensated for by comparing the similarity between the scan data at the same depth. The fabricated system was applied to scan 0-165 m depth of the mineshaft with 180 m depth. The reconstructed image was depicted in a 3D graph for interpretation.