• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.3
• /
• pp.107-115
• /
• 2003

This paper deals with the effect of the auxiliary pole core in the automotive starter motor on its characteristics. This motor is excited by the permanent magnet and has auxiliary pole core in the stator. The auxiliary pole core is a device to increase the effective flux to obtain the starling torque and prevent the demagnetization of the permanent magnet from the starting current. It Is important to design the auxiliary pore core. And overhang structure causes the electromagnetic phenomenon of 3-dimensional flux Path. Therefore. the characteristic analysis is achieved by the 2-dimensional Finite Element Method (FEM) with the compensated model and the 3-dimensional Equivalent Magnet Circuit Network (3D EMCN). The mechanical loss and the brush and coil resistance are separated from the various experiment of the tested motor, and then these factor are reflected on the analysis results. The validity of the proposed analysis method is verified by comparing the experimental and analysis results. The effects of the design parameters related to the auxiliary pole cote on the motor performance are analyzed by the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2605-2614
• /
• 2002

This paper describes an analysis method based on the experimental parameter for the 0.9kW starter motor of vehicle with permanent magnet and pole core, and analyzed the influence by the effect of pole core of starting motor by using the 2D-FEM analysis technique to reflect the structural characteristic of 3D. A starter motor consists mainly of armature, yoke and permanent magnet with the pole core. Additionally, there is different the axial length of each part. Therefore, the effective of analysis method is needed to improve the characteristic of it. This paper approached the 2D-FEM analysis estimated by the 3D-EMCN(Three Dimensional Equivalent Magnetic Circuit Network) instead of the 3D-FEM analysis to minimize parameters. As a result, this paper is proposed the validity of 2D-FEM analysis and obtained reasonable results for improving a performance.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.85-92
• /
• 2010

At the beginning the 21st century, we are interested in renewable energy especially photovoltaic. So, we have been installed PV at the building roofs so that we call it building integrated photovoltaic. But strictly speaking, installing the PV on the roof is not building integrated. There are few BIPV designs especially for balcony. In the apartment building, roof is good installing place for PV, but its area was limited. Now a day, built apartment building's heights are more and more increased so that the performance of installed PV on the roof cannot be enough to use even the public use. Thereby, we need the new space in the building to install the PV except the building roof. This study suggests the building facade balcony as a new space to install the PV with building integrated PV design. Hence, in this study, we are designed the movable BIPV shading device for apartment building balcony, and verified its performance with computer simulation. Developed device in this study can works as an electronic generation device and an overhang on the side balcony. As a result, the electronic generation performance of device contributes 15~30% to each apartment unit. The more unit width increase, the better contributed device generates.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.117-117
• /
• 2017

The onion (Allium cepa L.) is the most widely cultivated species of the genus Allium, especially it has been valued because of the pungent flavor and aroma. Allium species including onion has very large genome sizes ranging from approximately 10 to 20 Gbp, which have complicated genomic studies and precluded genome sequencing until recently. A population of 186 F2 individuals derived from a cross of 'Umjinara' ${\times}$ 'Sinsunhwang' and the two parental lines were used for this study. For the development of framework map, various types of markers including SSRs, RAPD, SNPs, and CAPS makers have been used for polymorphism test. Especially, a lot of SNP and CAPS loci were developed from the onion transcriptome sequence by RNASEQ of two parental lines. The GBS libraries have been constructed based on a modified protocol from Poland Lab using a two-enzyme system. We have been developing markers showing polymorphism between two parental lines, and genotyping for all F2 individuals were finished for a number of polymorphic markers. For the construction of GBS libraries, a set of 192 barcoded adapters were generated from complementary oligonucleotides with XhoI overhang sequence and unique barcodes of length 4-8 bp and they have been tested using two parental linesto determine the optimum conditions for GBS analysis.

• KIEAE Journal
• /
• v.16 no.5
• /
• pp.21-28
• /
• 2016

Purpose: The Objective of this study is to explore the capabilities of an integrated modelling and simulation workflow when applied to an experiment-based research process, aimed at deriving daylight optimization strategies specific to tall buildings. Methods: Two methods were devised to apply this workflow with the help of DIVA and Rhino/Grasshopper. The first method is a multiple variant analysis by setting up an appropriate base case and analysing its daylight and energy performance, forming the basis of comparison for subsequent cases for design variants. The second method involved setting up the base case within a site context and conducting a solar irradiation study. An architectural variables such as overhang and shading device, were then defined as inputs in the parametric definition in Grasshopper to control the selected variable. Results: While the first method took advantage of the speed and efficiency of the integrated workflow, the second method was derived based on the ability to directly process simulation data within the integrated, single-software platform of the proposed workflow. Through these methods, different architectural strategies were explored, both to increase daylight penetration and to reduce radiant heat gain. The focus is on methods by which this workflow can be applied to facilitate the experimental derivation of daylight optimization strategies that are specific to tall building design.

• The Korean Journal of Financial Management
• /
• v.26 no.4
• /
• pp.35-61
• /
• 2009

This paper investigates whether the investment of a chaebol firm depends on financial characteristics such as leverage and growth opportunity. We find that the investment of a chaebol firm increases as its growth opportunity increases. We also find that this positive effect of growth opportunity on the investment is more pronounced in a low-leverage firm than in a high-leverage firm. Unlike chaebol firms, however, the interaction effect between leverage and growth opportunity is not statistically significant for nonchaebol firms.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.107-113
• /
• 2009

In this paper, we studied of measurement the vibration of natural frequency using optical fiber sensor. The boring bar for measurement of vibration in use optical fiber sensor has the advantage of direct measure for the frequency than accelerometer. Because it deal with output value on electrical signal of optical fiber in physical disturbance when it measures the frequency of vibration. The optical fiber sensor measured the vibration of boring bar by the gap in sensing jig while optical fiber just kept contact with boring bar. A prototype system was composed of jig part with gap and optical system part. In this paper, we found out the possibility to measurement of vibration by the gap in use optical fiber.

• Childhood Kidney Diseases
• /
• v.12 no.1
• /
• pp.11-22
• /
• 2008

Telomeres consist of tandem guanine-thymine(G-T) repeats in most eukaryotic chromosomes. Human telomeres are predominantly linear, double stranded DNA as they ended in 30-200 nucleotides(bases,b) 3'-overhangs. In DNA replication, removal of the terminal RNA primer from the lagging strand results in a 3'-overhang of uncopied DNA. This is because of bidirectional DNA replication and specificity of unidirectional DNA polymerase. After the replication, parental and daughter DNA strands have unequal lengths due to a combination of the end-replication problem and end-processing events. The gradual chromosome shortening is observed in most somatic cells and eventually leads to cellular senescence. Telomere shortening could be a molecular clock that signals the replicative senescence. The shortening of telomeric ends of human chromosomes, leading to sudden growth arrest, triggers DNA instability as biological switches. In addition, telomere dysfunction may cause chronic allograft nephropathy or kidney cancers. The renal cell carcinoma(RCC) in women may be less aggressive and have less genomic instability than in man. Younger patients with telomere dysfunction are at a higher risk for RCC than older patients. Thus, telomeres maintain the integrity of the genome and are involved in cellular aging and cancer. By studying the telomeric DNA, we may characterize the genetic determinants in diseases and discover the tools in molecular medicine.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.5
• /
• pp.590-594
• /
• 2018

We developed a time-temperature indicator (TTI) that rapidly determines whether frozen mackerel Scomber japonicus has thawed during its distribution. Our TTI was made from filter paper capable of absorbing mackerel exudate that was soaked in a 20% citric acid solution at pH 4.0 and then dried. The dried absorbent paper was cut and attached to blue litmus paper with a 2 mm overhang. The fixed litmus paper was covered with a polypropylene film and sealed. The indicator was placed inside a polyvinyl vacuum package containing the mackerel sample. The vacuum-sealed packaged was frozen at $-20^{\circ}C$ for 24 h. After freezing, the color change and time dependence of the indicator were observed at room temperature ($25^{\circ}C$) and demonstrated the utility of this TTI for rapidly determining whether frozen mackerel underwent thawing during distribution.

• Earthquakes and Structures
• /
• v.5 no.3
• /
• pp.297-319
• /
• 2013

Two destructive earthquakes occurred on October 23 and November 9, 2011 in Van province of Turkey. The damage in residential units shows significant deviation from the expectation of decreasing damage with increasing distance to epicenter. The most damaged settlement Ercis has the same distance to the epicenter with Muradiye, where no damage occurred while relatively less damage observed in Van having half distance. These three cities seem to have resembling soil conditions. If the damages are evaluated: joint failures and insufficient lap splice lengths are observed to be the main causes of the total collapses in RC buildings. Additionally, low concrete strength, reinforcement detailing mistakes, soft story, heavy overhang, pounding and short columns are among other damage reasons. Examples of damages due to non-structural elements are also given. Remarkable points about seismic damages are: collapsed buildings with shear-walls, heavily damaged buildings despite adequate concrete strength due to detailing mistakes, undamaged two-story adobe buildings close to totally collapsed RC ones and undamaged structural system in buildings with heavily damaged non-structural elements. On the contrary of the common belief that buildings with shear-walls are immune to total collapse among civil engineers, collapse of Gedikbulak primary school is a noteworthy example.