In the CNC lathe working, the study of the effects of various cutting conditions on cut surface roughness is less active than that of the ordinary latee. After lathe working of SM45C, a carbon steel material for machine structure, its surface roughness was measured using a stylus surface roughness tester. In most cases, good surface roughness was obtained over 160m/min cutting speed and then the proper cutting depth was found as 1.0~1.5mm.
This study seeks what kind of factors influence to locate dwellings and to establish scenic spots in nature by a case study focused on a meandering stream. The study specially concentrates on the interrelationship between both residences and beautiful sceneries and a meander cut-off-area that reveals a special topographical characteristics, located at Samji village in Youngyang-eup, Youngyang-gun, Koungsangbuk-do. The meander cut-off area, developed at the middle or upper reaches of a river, often makes up specific landscapes such as precipitous cliffs, sheer cliffs and caves. And the area where is specially created by sudden change of flow due to erosion perceived by the cut surface to be the most beautiful scenic spot. These beautiful landscapes were used to be called as Dae, Dam or Gul and managed by Confucian scholars who enjoy refined taste and devote themselves to the study in nature. Moreover, the Ku-Hado-literary means the area of ex-flow-made the scholars' lving with a well prepared basis for agriculture where supplied a cornucopia of organic matters and water. The merit of agriculture made it possible that the scholars became economically independent, and the fact might be the essential point why the meander cut-off area took noticed. Actually, Cho-family has been in Smaji Village for generations, producing a large number of scholars and keeping the actual power of the region. The physical shape of the meander cut-off area, cozily surrounded by mountains, is considered as a good place for the dwelling due to the influence of traditional sight of view for location and P'ungsuchiri which is known as Feng Shui in China and geomancy in the western world. It is a fruit in it own way that we could find the ancestors' discernment and wisdom from this study, who have lived their lives adapting themselves to the given natural environment and also utilizing the nature wisely. But this is a current-argued study on the meander cut-off area. Follow-up studies have to be continued about the landscapes of the meander streams and the meander cut-off areas scattered all over the country except Samji Village and draw the characteristics from the comparative analysis.
This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.
For this study, 18 kinds of cut and sew or seamless knitted test garment were made. Samples differed from each other by skirt angles($90^{\circ}$, $180^{\circ}$), gauges(7G, 12G, 15G), and grain directions(bias direction, wale direction, and radial direction). After measuring the mechanical properties of various gauges on the seamless knitting machine, I compared shape of the knitted flare skirt through subjective evaluation on appearances. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, Duncan-test, correlation analysis, and regression analysis. The subjective evaluation on appearances of knitted flare skirts showed the following: In case of $90^{\circ}$ skirt, the seamless skirt showed a much higher score in every gauge expect that of the cut and sew 12G, and silhouette of 15G wale direction. In case of the $180^{\circ}$ skirt, the seamless type showed a much higher score in every item over the cut and sew expect the silhouette part of 7G wale direction.
Tran, The Viet;Trinh, Minh Thu;Lee, Giha;Oh, Sewook;Nguyen, Thi Hai Van
한국지반환경공학회 논문집
/
제16권4호
/
pp.23-32
/
2015
This paper addresses the effects of extreme rainfall on the stability of cut slopes in Yen Bai city, Northern Viet Nam. In this area, natural slopes are excavated to create places for infrastructures and buildings. Cut slopes are usually made without proper site investigations; the design is mostly based on experience. In recent years, many slope failures have occurred along these cuts especially in rainy seasons, resulting in properties damaged and loss of lives. To explain the reason that slope failure often happens during rainy seasons, this research analyzed the influence of extreme rainfalls, initial ground conditions, and soil permeability on the changes of pore water pressure within the typical slope, thereafter determining the impact of these changes on the slope stability factor of safety. The extreme rainfalls were selected based on all of the rainfalls triggering landslide events that have occurred over the period from 1960 to 2009. The factor of safety (FS) was calculated using Bishop's simplified method. The results show that when the maximum infiltration capacity of the slope top soil is less than the rainfall intensity, slope failures may occur 14 hours after the rain starts. And when this happens, the rainfall duration is the deciding factor that affects the slope FS values. In short, cut slopes in Yen Bai may be stable in normal conditions after the excavation, but under the influence of tropical rain storms, their stability is always questionable.
에우독소스의 비례론이 데데킨트가 실수를 현대적으로 정의한 '데데킨트 절단'과 일치한다고 해도 과언이 아니다. 데데킨트는 2000년보다 더 앞선 에우독소스의 방법을 근거로 조사함으로써 실수체계에 대한 확고한 기초를 확립하였다고 볼 수 있다. 그래서 데데킨트의 정의에서 그리스 유산을 구별하는 것은 가치가 있을 것으로 판단된다. 그런데 에우독소스의 비례론과 데데킨트 절단 사이에는 '근본적인 차이'가 존재한다. 그리스인들은 수(number)와 공간적 크기(magnitude)사이의 구별에 생각이 미치지 못한 것으로 보인다. 본 논문에서는 비와 비례 개념에 대한 에우독소스의 설명과 '데데킨트 절단'을 통한 실수의 구조와의 관계를 살펴봄으로서 에우독소스의 비례론이 데데킨트의 실수의 완비성을 증명하기 위해 도입된 절단의 개념과 어떤 관계가 있으며 어떤 영향을 끼쳤는지를 고찰하고자 한다.
Pennisetum aloperculoides is a key revegetation species mixed with other plants species and used for revegetating cut-slopes. The purpose of this research is to identify the effects of mixed seeding of revegetation plants on cut-slope revegetation with respect to the quantity of Pennisetum aloperculoides seeds. The coverage ratio and appearance frequency of Pennisetum aloperculoides, and other revegetation species were measured to assess the cut-slope revegetation. We divided Pennisetum treatments into four groups with different Pennisetum seed quantities of $0g/m^2$, $5g/m^2$, $10g/m^2$, and $15g/m^2$. For each treatment group, we mixed identical quantities of seeds from herbaceous flowers (bird's-boot trefoil, aster, chrysanthemums, golden coreopsis and china pink), cool-season turfgrasses, and woody plants (korean lespedeza, indigo and silk tree). The increase in the quantity of the Pennisetum seeds resulted in the higher coverage ratio for Pennisetum, but in the lower coverage ratio for herbaceous flowers, cool-season turfgrasses, and woody plants. We observed a short-term succession process in which the dominant species shifted in the following order: the initial species Pennisetum, herbaceous flowers, and then lastly woody plants. In case of the appearance frequency, we also observed the higher appearance frequency for Pennisetum and the lower appearance frequency for the other plants due to the increase in the quantity of Pennisetum seeds. Pennisetum, bird's-foot trefoil and china pink showed the tendency to decrease the appearance frequency from one month after seeding while cool-season turfgrasses became extinct due to summer drought. In the woody plants, the appearance frequencies of korean lespedeza and indigo were high due to the decrease in quantity of Pennisetum seeds. The silk trees were damaged from winter frost and none emerged at all in 2013 (the following year after the seeding). Korean lespedeza and indigo appeared to have the short-term rapid dominance over other treated revegetation plants.
This study provides a comparative analysis of the effects of pre-slaughter penetrative and non-penetrative stunning and post-slaughter stunning on meat quality attributes in longissimus lumborum (LL) and semitendinosus (ST) muscles in heifers. Ten animals were assigned to each of four treatment groups: i) animals were subjected to conventional Halal slaughter (a clean incision through the structures at the front of the upper neck - the trachea, oesophagus, carotid arteries and jugular veins) and post-cut penetrating mechanical stun within 10 to 20 s of the neck cut (Unstunned; US); ii) high power non-penetrating mechanical stunning followed by the neck cut (HPNP); iii) low power non-penetrating mechanical stunning followed by the neck cut (LPNP); and iv) penetrative stunning using a captive bolt pistol followed by the neck cut (P). For each carcass, muscle samples were removed within 45 min of slaughter, portioned and analysed for pH, cooking loss, water holding capacity (WHC), tenderness (WBS), lipid oxidation (TBARS) and color, over a two week storage period. Stunning did not affect pH and cooking loss. Significant differences in water holding capacity, tenderness, lipid oxidation and color were present at different storage time points. HPNP stunning resulted in lower WHC and color values, particularly lightness ($L^*$), higher TBARS values and peak force values compared with those stunned using LPNP, P and US. These adverse effects on quality were mostly encountered in the ST muscle. In conclusion, the meat quality achieved using P, LPNP and US treatments was comparable, and no treatment stood out as considerably better than another.
This experiment was carried out to investigate the effects of the final cutting time and cutting height on the winter survival, regrowth, and carbohydrate reserves in stubble, and early spring yield of orchardgrass-dominated pasture before and after the winter season. The experiment was conducted at the experimental field of the Livestock Experiment Station, in Suwon, from October 1985 to early 1986. The results obtained are summarized as follows: 1. Regrowth of plant after the final cut increased significantly (P<0.05) with plot of the early cutting time (Oct. 10) and high cutting height at the final. For winter survival, cut plant should regrow over 15cm in plant height. Therefore limit cutting time and cutting height were forced to be on Oct. 25 and at 6-9cm, respectively. 2. Total water soluble carbohydrate (TSC) content in stubble after the final cut was not significantly changed by different cutting time and cutting height. 3. The percentage of dead plant after wintering was found to be high with plot of the late cutting time and low cutting height at the final cut (P<0.05). And the correlation between the percentage of dead plant after wintering and final plant height before wintering was significantly negathe (r = -0.728**). 4. Fresh and DM yield at the early spring after wintering were increased in the plot of the early cutting time and high cutting height (P<0.05) at the final cut. And significantly positive correlation was observed between the early spring yield and final plant height before wintering (r = 0.720**).
Park, Hyun Jin;Lee, Gyu Bin;Park, Young Eun;Cho, Ji Hong;Choi, Jang Gyu;Seo, Jin Hee;Cheon, Chung Gi;Chang, Dong Chil
한국작물학회지
/
제66권4호
/
pp.375-382
/
2021
For stable cultivation in double cropping, it is important to use potato (Solanum tuberosum L.) cultivars with a short dormancy period of 50-70 days and plant seed tubers of appropriate type and size. An experiment was conducted during 2018-2019 to investigate the effects of seed tuber type and size on growth and yield performance in double cropping. Whole tubers of three sizes (10-20 g, 30-40 g, and 50-60 g) and conventional cut tubers weighing 30-40 g from three cultivars with different dormancy periods, namely 'Daeji' (40-60 days), 'Eunsun' (50-60 days), and 'Saebong' (50-80 days), were planted, and their field performance was compared. Regardless of the cultivar, the increase in the whole tuber weight up to 30-40 g led to fast emergence, thereby increasing ground cover rate, shoot growth rate, and tuber growth rate, which ultimately improved tuber yield by 33-54%. Comparing the whole and cut tubers, 'Daeji' and 'Eunsun' showed similar growth and yield performance; as such, the performance of whole tubers weighing 10-20 g was comparable to that of cut tubers weighing 30-40 g. However, 'Saebong', a cultivar with relatively long dormancy period, performed better with cut tuber than with whole tubers. Based on these results, we recommend the use of whole tubers weighing over 30 g for double cropping. Further studies to break tuber dormancy are warranted in cultivars with relatively long dormancy periods (50-80 days), such as 'Saebong'.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.