• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.157-163
• /
• 2003

This paper proposed a new type of vehicle detector using a MR sensor. and addressed detector's apparatuses and detecting algorithms. Proposed detector has been tested on a local highway between Mishiryong and Sokcho in Korea. Through extensive field tests, the outputs of the detector in response to various kinds of passing vehicles have been collected and analyzed. It is verified from the analyses that the outputs of the detector take on very different aspects with each vehicle, so that information on not only traffic count but vehicle types could be extracted from the outputs. And, with the proposed detector, traffic volumes on the two lanes in the tested region were measured and compared when both congested and clear traffic situations.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.163-168
• /
• 2015

In order to integrate high wind generation resources into power grid, it is an essential to predict power outputs of wind generating resources. As wind farm outputs depend on natural wind resources that vary over space and time, spatial modeling based on geographic information such as latitude and longitude is needed to estimate power outputs of wind generation resources. In this paper, we introduce the basic concept of spatial modeling and present the spatial prediction model based on Kriging techniques. The empirical data, wind farm power output in Texas, is considered to verify the proposed prediction model.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.2
• /
• pp.58-64
• /
• 1990

As the miniature load cells have small inner space and sensing elements of which are thin and very sensitive to manufacturing conditions, it is very difficult to predict the rated outputs and control them by using the compensation resistor. The very useful equation has been derived for calculation of theoretical rated outputs for diaphragm type miniature load cells when commercial diaphragm strain gages are used. Four diaphragm type miniature load cells of which capacities are from 300 N to 1, 000 N and outer diameters are 20 mm and 26.5 mm are manufactured. The differences between calculating results and actural ones are less than 5%. According to numerical analysis the decrease of rated outputs caused to main error is examined in existence of loading button.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.469-490
• /
• 2023

Survey was carried out on the acoustic outputs from 12 shock wave fields produced by the 10 extracorporeal shock wave lithotriptors whose technical documents are available, among the 33 devices approved by the Ministry of Food & Drug Safety (MFDS).The results show that the acoustic outputs (P+, P-, efd, and E), critical to the therapeutic efficacy and the patient safety, are largely different between the devices. The maximum values of P+, P-, efd, and E vary up to 2.08, 3.72, 3.89, and 15.98 times, respectively. The acoustic output parameters are not thoroughly provided in the technical documents, and some of data (eg. efd) are suspected to be abnormal outside usual ranges. The large device to device differences in the shock wave outputs are likely to undermine equivalence between the ESWL devices approved for the same indication. To verify the reliability of the data in the technical documents of the approved devices and to confirm if the acoustic outputs from the devices in clinical use are the same as those in their technical documents, an authorized test laboratory should be available. A postapproval monitoring led by the regulatory agency is suggested to maintain the acoustic outputs from the ESWL devices that suffer from degrading in performance due to aging.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1671-1674
• /
• 1997

In tihs paper, an acceleratiion transformation algorithm which compensates the sculling error is proposed for strapdown inertial navigation system. The algorithm utilize the corss-product of the acceleromenter outputs and gyro outputs to keep the accuracy of the vehicle velocity under high frequency dynamic motion. From the error analysis of the algorithm, it is shown that the magnitude of estimation error is reduced by four orders.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.291-294
• /
• 2006

This paper presents a decentralized input-output feedback linearizing controller for a multi-machine power system. Firstly, the controller is designed using input-output feedback linearization for modified outputs. Then we present a guideline for selecting gains of the controller and parameters in the modified outputs. Simulations illustrate the effectiveness of the proposed control scheme and the selection guideline.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.212-217
• /
• 1992

In this paper, a two ports machine(TPM) model for discrete event dynamic systems(DEDS) is proposed. The proposed model is a finite state machine which has two inputs and two outputs. Inputs and outputs have two components, events and informations. TPM is different from other state machine models, since TPM has symmetric input and output. This symmetry enables the block diagram representation of the DEDS with TPM blocks, summing points, multiplying points, branch points, and connections. The graphical representation of DEDS is analogous to that of control system theory. TPM has a matrix representation of its transition and information map. This matrix representation simplifies the analysis of the DEDS.

• International Journal of Quality Innovation
• /
• v.2 no.1
• /
• pp.1-9
• /
• 2001

As all the other managerial activities, total quality management (TQM) has also inputs into and outputs from the process. Therefore, the principal managerial efficiency criteria of maximum outputs with minimum inputs should be applied to TQM. In this paper, the methodology for the performance evaluation of TQM by Data Envelopment Analysis (DEA) was proposed. DEA is used to measure the efficiency of TQM for each firm with the input and output data obtained by questionnaire. It is found that there are not significant differences between the firms with and without IS09000 certification and between the large and small-sized firms with respect to the TQM efficiency.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2001.05a
• /
• pp.547-553
• /
• 2001

A ideal Methodology is a technology that efficiently utilize outputs of research and development (R&D). "Liquid Metal Reactor Design. Technology Development" is under development in Korea Atomic Energy Research Institute (KAERI) as on of the Mid-Term and Long-Term Nuclear R&D by MOST. To upgrade the productivity of the R&D during long period, system type project have been accomplished within plant period through schedule management by phase, outputs auditing, sharing and constructing database.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.339-342
• /
• 2006

The power outputs of renewable energy such as wind turbines and solar energy powers depend on natural sources. Accordingly, the power outputs of renewable energy is different from capacity rate at the time of peak load. Because of this gap, long term electricity power plan can have over-estimated reserve margin. So, this paper suggests the chronological approach to calculate the reliability assessment of renewable energy.