• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2016

Dead time is typically incorporated in voltage source inverter systems to prevent short circuit cases. However, dead time causes an error between the output voltage and reference voltage. Hence, voltage equation-based algorithms, such as motor parameter estimation and back electromotive force (EMF)-based sensorless algorithms, are prone to estimation errors. Several dead-time compensation methods have been developed to reduce output voltage errors. However, voltage errors are still common in zero current crossing areas, and an effect of the error is much worse in a low speed region. Therefore, employing voltage equation-based algorithms in low speed regions is difficult. This study analyzes the conventional dead-time compensation method and output voltage errors in low speed operation areas. A current shaping method that can reduce output voltage errors is also proposed. Experimental results prove that the proposed method reduces voltage errors and improves the accuracy of the parameter estimation method and the performance of the back EMF-based sensorless algorithm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.9-10
• /
• 2007

In this paper, we investigated the effect of solar cell breakage on maximum output power of PV module. The test result using artificial light source didn't give any change in output power in case of crack near electrical ribbon. Also, there was a reduction in output power in case of increasing of crack area far from electrical ribbon. But, this experiment is under artificial light source test method. So, when such a PV module is outdoor for a long time, there would be problems on electrical output power and durability because of thermal aging phenomenon of solar cell breakage.

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.47-49
• /
• 2004

In this correspondence, an new approach to design a fuzzy controller for system with uncertain output backlash to have good tracking performance is presented. Without using a compensation mechanism or backlash inverse, the fuzzy control mechanism is designed to implicitly compensate the delay effect arising from an uncertain output backlash and to make the output backlash stable without limit cycles. The proposed method designs a model-based fuzzy controller for a one-input one-output linear plant with output backlash. The effectiveness of the designed fuzzy controller is illustrated by the simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1512-1515
• /
• 1997

One of the advantages of master-slave teleoperation is scaling concept such as position scaling, force scaling Meanuhile, lots of quantization effects are generated from position and force sensors in the master and slave manipulator. In this paper, to show the output error caused by the quantizaion effects from the position sensor and position scaling factor, simulation is done for free motion without contact in slave side. Transfer functiion model in which the quantization effect is assumed to be a disturbance input to the system is derived. Model shows that Jacobian, scaling factors, and controller affect the output by quantization effects form esnsors. One dof master and slave are used for simulation. In our study, the higher sensor resolution decreases the output error form quantization. Scaling factors can amplify the quantizatiion effects form the sensors in master and slave manipulators.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1871-1875
• /
• 2003

The cancellation of the output signal occur between output tubs have occurred place an electromagnetic interference and deteriorated the light efficiency of the neon tub. In order to prevent this problems, we have developed the modified electronic ballast for neon(MEBN). The MEBN have used a shielded line to the output and designated partly the half-bridge in the middle of the circuit. In an experimental results, this will be lengthen the life of the neon tub and obtain the effect which shields an electromagnetic wave to injurious to the people’s body.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.383-391
• /
• 2014

For the digital control of systems such as grid-connected inverters, measuring inverter output currents accurately is essential. However, current measurement offsets are inevitably generated by current measurement paths and cause DC current components in real inverter output currents. Real inverter output currents with DC components cause the DC-link capacitor voltage to oscillate at the frequency of a utility voltage. For these reasons, current measurement offsets deteriorate the overall system performance. A compensation strategy to eliminate the effect of current measurement offsets in grid-connected inverters is proposed in this study. The validity of the proposed compensation strategy is verified through simulations and experiments. Results show that the proposed compensation strategy improves the performance of grid-connected inverters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.985-988
• /
• 2001

A piezo-buzzer being used for the purpose of generation of audible frequency, which is a electric-acoustic transducer utilizing the inverse piezoelectric effect. Also it can be used for a pressure sensor according to the piezoelectric effect. But the output of a piezo-buzzer is a differential signal. In this study, we've made a system that can measure a real pressure by integration of output signal. According to our results, it could be found a possibility of application for pressure sensor by measurement of output characteristics when a piezo-buzzer was pressurized and depressurized, and by measuring of an error by means of the drift current of OP-Amp, etc..

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1989.10a
• /
• pp.9-12
• /
• 1989

ABSTRACT -- Recently, a method of magnetically-enhanced discharge columns is considered to increase the luminous efficacy of discharge lamps, which is based upon the face that the diffusion motion of charged particles in the discharge column strongly depends on the applied magnetic fields. This study investigates the effect of applied transverse magnetic fields on the light output of low-pressure Hg-Ar discharge. As a result, it is found that the electric field in the positive column increases according to the applied megnetic field, which causes an increase in the total light output. And this effect is much more pronounced upon the spectral line originating form the higher levels.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.560-569
• /
• 2017

With a remarkable and rapid change of universities in Korea, the role of universities has been changed from a traditional education supplier to a demander. Both the remarkable decrease of the number of entering students and the advent of an open education market are enforcing the universities to be changed. Universities should provide a variety of educational services in accordance with the students' needs. This study is based on the systematical Kuh's model which the educational service quality provide a decision making of alternative plan. This research is purposed to empirically study the effects of educational service quality(circumstance index, input index, participate index, output index) provided by universities on student satisfaction and educational performance(Perceived usefulness, Education Achievement). The results of this research follows; first, circumstance index, input index and output index significantly effect student satisfaction, but participate index does not effect satisfaction. Second, student satisfaction significantly effects on the educational performance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.61-65
• /
• 2004

This paper presents the effect of methanol blended fuel on the engine performance and the reduction of exhaust emissions. In this wort, the combustion effects of methanol blended fuel in the engine was investigated for the conditions of three kinds of mixing ratios. Based on the experimental results, the output characteristics of the engine show the improvement of output performance due to the blended fuel of methanol. Also, the unburned hydrocarbon and carbon monoxide emissions are decreased in accordance with the increase of methanol blended ratio.