• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5110-5116
• /
• 2011

In this paper, multiplexing automation system will be proposed for the automobile electromotive mirror using CAN(Controller Area Network) protocol which has been known that it has a high reliability on the signal in the various network protocols. To do this, a master controller and two (input/output) slave controllers (H/W) are being made and application layer (S/W) is being programmed for effective going and communicating between subsystems. The possibility of the effectiveness of application and control ability will be shown when the system has minimum electrical lines by testing the experimental systems which was made up of the automobile electromotive mirror.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.799-808
• /
• 2023

Globally, abnormal climate phenomena have led to an increase in rainfall intensity, consequently causing a rise in flooding-related damages. Agricultural areas, in particular, experience significant annual losses every year due to a lack of research on flooding in these regions. This study presents a comprehensive analysis of the flood event that occurred on July 16, 2017, in the agricultural area situated in Sindaedong, Heungdeok-gu, Cheongju-si. To achieve this, the EPA (United States Environmental Protection Agency) Storm Water Management Model (SWMM) was employed to generate runoff data by rainfall information. The produced runoff data facilitated the identification of flood occurrence points, and the analysis results exhibited a strong correlation with inundation trace maps provided by the Ministry of the Interior and Safety (MOIS). The detailed output of the SWMM model enabled the extraction of time-specific runoff information at each inundation point, allowing for a detailed understanding of the inundation status in the agricultural area over different time frames. This research underscores the significance of utilizing the SWMM model to simulate inundation in agricultural areas, thereby validating the efficacy of flood alerts and risk management plans. In particular, the integration of rainfall data and the SWMM model in flood prediction methodologies is expected to enhance the formulation of preventative measures and response strategies against flood damages in agricultural areas.

• Journal of Forest and Environmental Science
• /
• v.25 no.3
• /
• pp.167-175
• /
• 2009

An exploratory study was conducted in Juri Forest Range-2, a proposed biodiversity conservation area of Bangladesh to explore the present growing stock of tree, regeneration condition and status of non-timber forest products (NTFPs). This conservation area contains both natural and artificial plantation was selected by using multistage random sampling method. For determination of plot size and sampling methods, the quadrate size ($10m{\times}10m$) for tree stock measurement, ($2m{\times}2m$) for regeneration survey, ($20m{\times}20m$) for NTFPs survey was determined. Regarding tree stock survey, 14 species under eight families were found where Tectona grandis shows average number of stem/ha was 624 and basal area/ha was (10.36 $m^2/ha$) followed by Acacia auriculiformis (0.2 $m^2/ha$ and 637 stem/ha), Gmelina arborea (0.2 $m^2/ha$ and 600 stem/ha). In regeneration survey, 14 species were found belonging to 9 families where Alstonia scholaris shows highest (3,750) seedling per hectare. Regarding NTFPs, bamboo and cane are the most common resources. In last ten years, the total timber output was 1,28,596.14 cubic feet and total amount of revenue was 4,64,434 US$. The vacant area is 1,335.5 acre which contains 14% of total area. If this vacant area is planted with suitable species and take proper steps for appropriate management of this species it will be a good biologically diversified area.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.145-156
• /
• 1987

A PSWATH is a computer program for the determination of principal particulars of Small Waterplane Area Twin Hull (SWATH) Ship design at the preliminary design stage. This paper describes the PSWATH system and the underlying theory. The major calculation modules are hull definition, resistance and propulsion, weight estimation and pitch stability analysis. Use of the model is illustrated by input, output and means of examples.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.241-244
• /
• 2005

In this paper, we construct UWB system formed by MIMO(Multi-input Multi-output) antennas using indoor WPAN(Wireless Personal Area Network) channel modeling and analyze the interference among these channels.

• 전기의세계
• /
• v.29 no.9
• /
• pp.584-593
• /
• 1980

Conventional radar antenna systems are susceptible to performance degradation caused by unwanted signals received via the antenna sidelobes and/or mainlobes. Adaptive array systems offer possible solution to this interference problem by automatically steering nulls to unwanted signals providing significant system performance improvement. Another important andvantage of the adaptive array is its self-optimization capability which uses the collective incoming noise data for the nulling purposes. This paper provides a tutorial introduction to adaptive arrays as well as some new development of recent research in this area. Optimum link between the antenna theory and signal processing has been sought by illustrating the gain patterns and output signal-to-noise ratio. Signal acqusition methods are shown including a new attempt of the use of spread-spectrum techniques in conjuction with array systems.

• Journal of Korean Society of Transportation
• /
• v.6 no.2
• /
• pp.7-20
• /
• 1988

Recent developments in combining transportation planning models and input-output approaches, together with inclusion of intensity of land uses, have made it possible to construct realistic comprehensive urban and regional activity models. These modes form the basis for a rigorous approach to studying the interactions among urban activities. However, efficient computational solution methods for implementing such comprehensive models are still not available. In this paper an efficient solution method for the urban activity model is developed by combining Evans' partial linearization technique with Powell's hybrid method. The solution algorithm is applied to a small but realistic urban area with a detailed transportation network.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.577-580
• /
• 1999

High power density on-board power supply is implemented by using flat transformer. In the high frequency switching converters, large leakage inductance increases the switching stress and duty cycle loss, which sometimes limits maximum switching frequency. The flat transformer is designed by using special core structure, which has very low profile and low temperature rise since the thermal loading is spread evenly over a larger area. 100W, 3.3V output on board supply is built and tested and 50.7W/$\textrm{inch}^{3}$ power density is achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.222-225
• /
• 2006

A custom-made display driver for an electronic paper is presented, which has high-voltage multilevel output capability and extremely low power consumption. An original level-shifter circuit can effectively reduce the power consumption and the chip area. This driver was implemented to a Quick-Response Liquid Powder Display (QR-LPD) and the image quality and power consumption was estimated.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.45-48
• /
• 1999

The demands of WLAN(Wireless Local Area Network) systems increase rapidly in whole society and this phenonenon has been expected that WLAN wi11 substitute for wired-LAN. The FHSS(Frequency Hopped Spread Spectrum) method using the WLAN is changed to the performance of Frequency synthesizer. In this paper, we proposed pipeline-accumulator using ring-counter method instead of constant accumulator that has demerits of size and power consumption. Designed DDFS generated operating frequency of 167MHz and maximum output frequency of 83.5MHz.