• 태양에너지
• /
• 제2권2호
• /
• pp.1-9
• /
• 1982

This paper presents a method. for estimating the useful output of solar heating sys-terns. Heating load calculations, climatic data and various conditions are used in this procedure to estimate the fraction of the monthly heating load supplied by solar energy for a particular system the design procedure presented in this paper referred to the f-chart method. The results of this study are as follows; 1) The collected energy is not rised lineary to collector area. 2) If the heating area has equivalent solar collector area, the solar energy utilization for space heating is over 90%. 3) Transmittance- absorptance product for radiation at normal incidence, (${\tau}{\alpha}$)/(${\tau}{\alpha}$)n, during most of the heating season is 0.92 for a two-cover collector. 4) Orientation of the collector has little effect on the annual performance of solar heating system within the $15^{\circ}$.

• Spatial Information Research
• /
• 제8권1호
• /
• pp.131-140
• /
• 2000

하천의 흐름해석 분야에서는 모형이 요구하는 입·출력 자료의 구성이 복잡할 뿐만 아니라 흐름의 공간적 분포특성 도시가 매우 중요하지만 지금까지 체계적인 자료관리가 이루어지지 않은 실정이다. 본 연구에서는 등고, 하천, 표고, 경계 및 하도단면 등으로 구성된 국가지리정보시스템과 연계된 데이터베이스를 구축하는 방법과 등간격 하도단면 자료를 구축하는 방법을 제안하였다. 연구대상지역은 팔당댐 하류에서 인도교 지점에 이르는 한강구간을 선택하였다. 구축된 데이터베이스는 연구대상지역의 과학적인 하천유량 관리에 유용하게 이용될 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.7-10
• /
• 2001

We have developed a prototype dedicated CAM system for machining a human bust that is not a relief. The input is STL file format, and the output is NC-codes for machining on a 3-axis general purpose CNC milling machine with an index table attached. Main modules are STL import, STL transformation, modeling jig/fixture, master model generation, and calculation of machining area. System architecture is proposed and main modules are briefly described. We adopted the angle between tool-axis and the surface normal vector to calculate machining area, and tested at several degrees.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권1호
• /
• pp.143-146
• /
• 2016

A new area-efficient multi-phase clock frequency multiplier is presented. The proposed fractional-ratio frequency multiplying DLL (FFMDLL) is implemented in a 65 nm CMOS process and occupies an active area of just $0.01mm^2$. The proposed FFMDLL provides 8-phase output clocks and achieves a frequency range of 0.6-1.0 GHz with programmable multiplication ratios of N/M, where N = 4, 5, 8, 10 and M = 1, 2, 3. It achieves an effective peak-to-peak jitter of 5 ps and dissipates 3.4 mW from a 1.0 V supply at 1 GHz.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.602-609
• /
• 2000

This study is concerned with analysis and reliability evaluation of LV circuit in Cab Cubicle system which controls train to keep safety in High Speed Train. LV circuit is operated with diagnosis system as safety system. In this paper, we suggest a design and an implementation method to analyze LV circuit or trace fault area in LV circuit. This simulator uses 28 package modules and examines input and output by equations. So, user can trace where is fault area. The implemented system can be expected to be useful for long term test and evaluation of circuit in high speed train systems. We expect reduction to diagnosis area or repair time by this simulator.

• 한국광학회지
• /
• 제5권1호
• /
• pp.106-112
• /
• 1994

Fabry-Perot 모델을 사용하여 광폭 다이오우드 레이저(broad-area diode laser ; BLD)에 대한 주입-잠금을 분석하였다. 일반적인 단일띠 다이오우드 레이저의 경우와 다르게, 주입되는 광을 약간 경사지게 하는 BLD의 경우는 BLD가 하나의 포화 이득 증폭기로서 동작한다고 볼 수 있으며, BLD의 양면에서의 다중 반사의 의한 중첩으로써 출력된 광을 해석할 수 있다. 1차원 Gaussian 광의 중첩에 의한 근거리와 먼 거리 분포를 구하였다. 또한, 입사 광의 주파수가 변화될 때 출력 광의 각도 변화를 계산하여 대역폭 약 120 GHz에 0.022도/GHz 혹은 10.37도/nm의 값을 얻었다.

• 한국습지학회지
• /
• 제2권2호
• /
• pp.147-157
• /
• 2000

The objective of this study is to develop a NGIS-GUI (National Geographic Information System-Graphic User Interface) system for the computation of peak discharge at drainage basin outlet. The developed system is composed of GIS data extraction module, peak flow computation module and output display module. The selected study area is the Sungjun reservoir area near the Milyang, Kyungnam province and the peak flows depending on various recurrence intervals are computed and graphically displayed. The developed system will be useful for the scientific water flow management in the study area.

• ETRI Journal
• /
• 제31권6호
• /
• pp.765-769
• /
• 2009

In this paper, we present the fabrication of 40 Gb/s traveling-wave electroabsorption modulator-integrated laser (TW-EML) modules. A selective area growth method is first employed in 40 Gb/s EML fabrication to simultaneously provide active layers for lasers and modulators. The 3 dB bandwidth of a TW-EML module is measured to be 34 GHz, which is wider than that of a lumped EML module. The 40 Gb/s non-return-to-zero eye diagram shows clear openings with an average output power of +0.5 dBm.

• 산업경영시스템학회지
• /
• 제29권2호
• /
• pp.58-66
• /
• 2006

This paper addresses the analysis of the travel distance and the number of storage location for storage location allocation methods in a warehouse system. The dedicated, randomized, combined and limited storage methods are considered. The combined and the limited storage methods are suggested here, which the combined storage method is to divide the storage locations into the dedicated storage area and the randomized storage area, and the limited storage method is to restrict the storage area of each product. Through a numerical example, the average travel distance between input/output point and the storage locations, and the number of storage location needed in the warehouse are compared between storage location allocation methods. The nearest randomized storage method is shown as the reasonable one in the travel distance and the number of storage location.

• 산업융합연구
• /
• 제13권1호
• /
• pp.1-9
• /
• 2015

The purpose of this Study is to analyze the economic effect of the project for the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area aimed at activation of R&D of companies within the Kumoh Technology Valley. As the result of the analysis, the investment of 56.837 Billion Won in the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area had the effect on production inducement valued at 133.582 Billion Won, effect on added value inducement valued at 41.764 Billion Won, effect on import inducement valued at 16.794 Billion Won and the effect on employment inducement numbered at 4,992 persons.try.