• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.847-851
• /
• 2000

In this study, contour-vibration-mode Pb($Ni_{1/2}$,$W_{1/2}$)$O_3$-Pb(Zr,Ti)$O_3$ piezoelectric transformers for driving a 28W(T5) fluorescent lamp were fabricated to the modified filter structure with ring and dot electrodes which has been developed for application in 455kHz AM radios. The piezoelectric transformers were fabricated to the size of $31.5$\times$31.5$\times$2.5$mm^3$ with the variations of ring/dot electrode area ratio. Driving of piezoelectric transformer was carried out with input region for the ring electrode and output region for the dot electrode. The electrical properties and characteristic temperature rises caused by the vibration were measured at various load resistances. A 28 W fluorescent lamp, T5, was successfully driven by the fabricated transformer. The transformer with ring/dot electrode area ratio of 1.83 exhibited the best properties in terms of output power, efficiency and characteristic temperature rise, 30.95 W, 97.57% and8.3$^{\circ}C$ respectively.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.3
• /
• pp.265-276
• /
• 2014

The application of software engineering is not common in the development of astronomical observation system. While there were component-wise developments in the past, large-scale comprehensive system developments are more common in these days. In this study, current methodologies of development are reviewed to select a proper one for the development of astronomical observation system and the result of the application is presented. As the subject of this study, a project of operation software development for an astronomical observation system which runs on the ground is selected. And the output management technique based on Component Based Development which is one of the relatively recent methodologies has been applied. Since the nature of the system requires lots of arithmetic algorithms and it has great impact on the overall performance of the entire system, a prototype model is developed to verify major functions and performance. Consequently, it was possible to verify the compliance with the product requirements through the requirement tracing table and also it was possible to keep to the schedule. Besides, it was suggested that a few improvements could be possible based on the experience of the application of conventional output management technique. This study is the first application of the software development methodology in the domestic astronomical observation system area. The process and results of this study would contribute to the investigation for a more appropriate methodology in the area of similar system development.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.311-319
• /
• 2008

Evaluation of an amplitude domain reflectometry (ADR) type soil moisture sensor as ThetaProbe ML2x using the response of frequency impedance was performed in a variety of soil porous media such as Jumunjin standard sand, weathered granite soil at Sangju area, and weathered gneiss soil at Jangsu area. The tested soils were classified with a dried condition and a wetted condition for comparing with soil volumetric water content under different installed depths of the measurement sensor. In the results the part of measurement rod including one signal rod and three shield rod 6cm in length was found to decrease the variation of measurement output voltage with insert 5cm over into the soil porous media. The measurement output voltage was verified to more stable output voltage under weathered granite soils and weathered gneiss soils contained the fine grain materials such as clay and silt minerals than the gradual grain material like as the standard sands. Therefore, measurement values by soil moisture sensor can be offered the more stable values when an contact volume between soil porous media and measurement sensor increase.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.449-453
• /
• 2021

Interest and investment in renewable energy have increased worldwide, highlighting the need for renewable energy. Solar energy was the most promising energy of all renewable energy sources, and it has the highest investment value. Because photovoltaics require a certain amount of area for installation, high density and high output performance are required. Shingled module is a promising technology in that they are featured by higher density and higher output compared to the conventional modules. Shingled technology uses a laser scribing to divide solar cells that are to be bonded with electrically conductive adhesive (ECA) to produce and connect strings, which has a higher output in the same area than the conventional modules. In the process of producing solar modules, metal ribbons are used to interconnect cells, but they are also needed for string connections in shingled solar cells. Accordingly, in this study, we researched the interconnection that best suits the connector that joins the string to the string. The module outputs produced under the conditions of the string interconnection were compared and analyzed.

• Architectural research
• /
• v.19 no.2
• /
• pp.35-43
• /
• 2017

In South Korea, problems such as low fertility, aging population, and income polarization have recently become more serious. In this time of social change, it is necessary to examine the current changes occurring to residences in order to improve the stability and health of residential areas. The purpose of this study is to investigate the changes of residential areas that occurred between 2000 and 2010 based on detached houses, which are the foundation of residential areas in Seoul. Changes in residential areas can be observed by examining changes in the type of housing and the characteristics of the residents. Since the type of housing and the characteristics of the residents change in the same area, it is necessary to study them together, not as individual elements. Census data is suitable for this purpose, because it can show the changes that have occurred to the housing type and the residents' characteristics within the neighborhood unit. Among the census output areas identified as residential areas based on detached houses, six sites were selected as the case study area based on the rate of change of detached houses. From the result of the case study using the census data, the study area was categorized into three regional types: (i) an urban development and redevelopment area; (ii) an area with a concentration or increasing number of detached houses; (iii) an area with an increasing number of multi-family houses based on detached houses.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.174-180
• /
• 1988

Land reform in Korea was performed in 1949. The formation of owner farmers was the primary objective of land reform. But since land reform, the number of tenants has been increasing, and it reached to 65.7% of total farmhousehold by 1985. To analyze the productivity of tenant farming, 40 farmers in Kumnam, Yeongi Gun and Gongju Gun, Banpo, Chungnam Province, were selected as samples for the empirical analysis. The results of the empirical analysis are summarized as follows; 1. In plain area, tenants input 5% more labor, and 15% less capital than owner farmers. In mountain area, tenants input 15% more labor, and 4% more capital than owner farmers. 2. There is no difference in the output of rice between owner farmers and tenants in both area. 3. In plain area, the physical productivity of labor of owner farmers is 4.6 (kg/hour), and that of tenants is 4.4. And the physical productivity of labor of owner farmers in mountain area is 4.2, and that of tenants is 3.6. 4. The physical productivity of capital of owner farmers in plain area is 17.7(kg/1,000 won), and that of tenants is 20.6. In mountain area, the physical productivity of capital of owner farmers is 18.8, and that of tenants is 17.9.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.787-801
• /
• 2006

Focused in the characteristic of R&D on Geoscience and Mineral Resources as basic research area, we survey on methods of public works' economic impact analysis including cost-benefit analysis and resent technology evaluation methods and suggest apply-methods to conduct economic impact analysis on R&D of geoscience and mineral resources. To conduct economic impact analysis on the basic research area, it need to identification research's out-come not just output. In this perspective, we propose a method, Input-Output-Outcome Roadmapping to identify the outcome of R&D and show the relation of input, output, and outcome of R&D. Furthermore, noticing the different effects of R&D from public works, we directly evaluate the use-value of the academic theory or geological maps through Contingent Valuation Method(CVM) and others developed as evaluation methods on environmental goods. In indirect application methods, it can evaluate the partial of the pubic works' benefit with assuming R&D factors if R&D is a part of public works. If not, we evaluate the R&D's value as reductions of costs or additions of benefit with finding related public works.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.859-866
• /
• 1994

It is difficult to make an exact estimate of the peak discharge or the runoff depth of flood and establish the proper measure for the flood protection since the water stage or discharge has been nearly measured at most medium or small river basins. The objective of this study is to estimate parameters of the discrete, linear, input-output model for medium or small river basin. The On-Cheon River basin in Pusan was selected for the study area. The runoff data used in the study has been observed since June 1993, and the effective rainfall was determined using the storage function method. The parameter sets of the discrete, linear, input-output model were estimated using the least squares method and the correlation function method, respectively. The calculated hydrographs by the discrete, linear, input-output model regenerated the observed outflow hydrographs well, and also the simulated flood hydrograph was comparable to the observed one. Therefore, it is believed that the discrete, linear, input-output model is simpler than other runoff analysis methods, and can be applied to a medium or small river basin.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.397-397
• /
• 2016

Triboelectric nanogenerators (TENG) can produce power from ambient mechanical sources and have strong points of high output performance, light weight, low cost, and easy manufacturing process. It is expected that TENG can be utilized in the fields of wireless electronics and self-powered devices in the world which pays attention to healthcare and the IoT. In this work, we focus on scavenging ambient rotational energy by using a durably designed TENG. In previous studies regarding harvesting rotation mode energy, the devices were based on sliding mechanism and durability was not considered as a major issue. However friction by rotation causes reliability problems due to wear and tear. Therefore, in this study, we convert rotary motion to linear motion utilizing a cam by which we can then utilize contact-mode TENG and improve device reliability. In order to increase output performance, bumper springs were used below the TENG and the optimum value for the bumper spring constant was analyzed theoretically. Furthermore, the inserting a soft substrate was proposed and its effect on high output was determined to be due to an increase in the contact area. By increasing the number of cam noses, the output frequency was shown to increase linearly. For the purpose of maximum power transfer, the input impedance of the device was determined. Finally, to demonstrate the use of the C-TENG as a direct power source, it was installed on a commercial bicycle wheel and connected to 180 LEDs. In conclusion we present a rotational motion TENG energy scavenger system designed for enhanced durability and optimized output by appropriate choice of spring constants and substrate.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.267-274
• /
• 2013

This paper presents a design of LLC resonant converter IC for LED backlight unit based on PFM/PWM dual-mode feedback. Dual output LLC resonant architecture with a single inductor is proposed, where the master output is controlled by the PFM and slave output is controlled by the PWM. To regulate the master output PFM is used as feedback to control the frequency of the power switch. On the other hand, PWM feedback is used to control the pulse width of the power switch and to regulate the slave output. This chip is fabricated in 0.35um 2P3M BC(Bipolar-CMOS-DMOS) Process and the die area is $2.3mm{\times}2.2mm$. Current consumptions is 26mA from 5V supply.