• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.10
• /
• pp.766-770
• /
• 2013

This paper tried to develop a BLDC electric motor securing the 800 W-level watertight structure for driving the outboard motor. For this purpose, this paper developed a high-efficient controller-integrating BLDC electric motor system for underwater propulsion and designed and developed a triple watertight structure. Besides, this study developed a outboard motor integrating motor, propeller and controller based on the production of a controller for BLDC motor which can the speed control by selecting low-voltage, high-current power element. The characteristics of developed outboard motor were 24 V input voltage, over 800 W motor output, and max. 3,000 rpm motor, and 84.9% motor efficiency, and the developed outboard motor could secure the watertight structure in 5 m in water depth.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.309-316
• /
• 2017

Recently, the outboard engine system of internal combustion engine is widely used in the field of small ship propulsion. However, the internal combustion engine has serious problems of energy depletion and environmental problems, so electric propulsion methods are being studied. In this paper, we have developed important motors and controllers of electric propulsion system for small marine outboard motors. The motor design was performed through the motor characteristics analysis method, and the 30Kw system was developed through the BEMF processing circuit and the power conversion circuit by the embedded microprocessor. This study was carried out through government supported projects and achieved quantitative targets through accredited institutions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.476-483
• /
• 2012

This paper introduces the method for efficiency improvement of 5HP electric thrusting system for outboard motor. The most efficient model of motor and propeller is suggested and verifying its performance through the prototype model. Also, We show improvement of 20% compared to existing system through the equipped test.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.518-526
• /
• 2018

As a new technical approach, this paper introduces a method for improving an electrically propelled outboard motor in consideration of the driving system applied to an electric-propulsion boat with solar cell energy. The most efficient model for a drive shaft, propeller shaft, and bevel gear was suggested and examined with respect to the results of test operation in prototype mode. Furthermore, this research included a performance evaluation of the manufactured prototype to acquire the purposed quantity value and the development items. After manufacturing the desired prototype of an electrically propelled outboard motor, the maximum sail time, thrust force, noise, and weight were evaluated in a performance test. An additional test in relation to the maximum sail speed (knots) of the completed prototype was conducted using a sea trial evaluation to acquire the optimum quantity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.56-64
• /
• 1996

In this paper, the sound radiation level of parts of a O.B. Motor was measured and analyzed by the measurement method using wave-guide reverberation environment. Based on the above measurement results, a noise control was established for engine cover and exhaust silencer and its effects were compared and analyzed. The noise control method increased transmission loss by painting GELNAC on the engine cover and extend exhaust pipe to reach under water.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.229-234
• /
• 2007

Currently offshore fisheries are one of shrinking industries and fishermen are getting older. Moreover it is difficult to work fisheries for decreasing fishermen as the time goes. Two people per a boat work together at least for proper fisheries. If the unskilled fisherman boards on boat, it will make some troubles to speak each other and diminish the efficiency of working because one person should control the boat. So it need to study the remote control system for leasure and outboard engine that can control and work at the same time. The remote control system is consisted of engine, steering gear and forward reverse neutral gear controls. These three controls are made by position and speed control using DC motor, and microcontroller is used to control the engine speed and rudder angle. This system can be controled and worked alone and we tested the system at sea and confirmed that the system works properly.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.71-74
• /
• 2006

Currently offshore fisheries are one of shrinking industries and fishermen are getting older. Moreover it is difficult to work fisheries for decreasing fishermen as the time goes. Two people per a boat work together at least for proper fisheries. If the unskilled fisherman boards on boat, it will make some troubles to speak each other and diminish the efficiency of working because one person should control the boat. So it need to study the remote control system for leasure and outboard engine that can control and work at the same time. The remote control system is consisted of engine revolution, steering gear and forward reverse neutral gear controls. These three controls are made by position and speed control using DC motor, and microprocessor is used to communicate and control the engine speed This system can be controled and worked alone and we tested the system at sea and confirmed that the system works properly.

• International Journal of Aerospace System Engineering
• /
• v.3 no.2
• /
• pp.26-30
• /
• 2016

Experimental study on the unsteady aerodynamics analysis and power consumption of a folding wing is accomplished using a wind tunnel testing. A folding wing model is fabricated and actuated using servo motors. The flapping wing consists of an inboard main wing and an outboard folding wing. The aerodynamic forces and consumed powers of the flapping wing are measured by changing the flapping and folding wings inside a low-speed wind tunnel. In order to calculate the aerodynamic forces, the measured forces are modified using static test data. It was found that the effect of the folding wing on the flapping wing's total lift is small but the effect of the folding wing on the total thrust is larger than the main wing. The folding motion requires the extra use of the servo motor. Thus, the amount of the energy consumption increases when both the wings are actuated together. As the flight speed increases, the power consumption of the folding wing decreases which results in energy saving.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.902-903
• /
• 2014

현재, 해양 레저 스포츠 산업이 발달로 인하여 해양 레저용 보트 산업도 발달해 나가고 있다. 그러나 세계적으로 친환경 기술 개발 관련 정책이 강화되고 있으며, 미국 및 유럽의 경우는 가솔린 엔진으로부터 배출되는 대기 오염 물질에 대한 환경규제를 점점 강화해 나가고 있다. 이러한 원인으로 인하여 친환경 배터리 충전식 전기모터시스템을 도입하고 있으며, 충전식 전기모터시스템에 사용되는 소형 모터 및 충전용 배터리에 대한 수요가 꾸준히 증가하고 있다. 본 논문에서는 배터리 충전식 전기모터시스템에 사용되는 직류 24[V] 환경에서 2.5[HP] 용량의 고출력 고효율의 선외기용 BLDC(Brushless Direct Current) 모터 제어기 및 모터 드라이브, 홀(Hall) 센서를 통한 BLDC 모터의 상태 파악 및 모터의 정/역 제어 및 속도제어에 대한 설계 방법을 제시하고자 한다.