• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.698-706
• /
• 2016

Orthogonal frequency division multiplexing (OFDM) has high peak to power ratio (PAPR). High PAPR makes problems such as signal distortion and circuit cost increasing. To solve the problemsm several PAPR reduction methods have been proposed. However, synchronization and orthogonality in OFDM systems may be a limitation to reduce latency for 5G networks. Generalized frequency division multiplexing (GFDM) is one of the possible solutions for asynchronous and non-orthogonal systems, which are more preferable to reduce the latency. However, multiple subsymbols in GFDM result in more superposition in time domain, GFDM has higher PAPR. Selective mapping (SLM) is one of PAPR reduction techniques in OFDM, which uses phase shift. The PAPR of GFDM SLM is compared to conventional GFDM and OFDM SLM in terms of PAPR reduction enhancement via numerical simulations. In addition, the out-of-band performance is analyzed in the aspect of asynchronous condition interference.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.175-177
• /
• 2017

In order to reveal physical conditions of molecular gas in active galaxies (active galaxies mean both starbursts and AGNs in this paper), we carried out systematic observations (R = 19 ~ 120) of CO fundamental band at $4.7{\mu}m$ in absorption with AKARI. We also made follow-up CO absorption observations at higher spectral resolution (R = 5000 ~ 1000) with Subaru. Recently, Herschel made extensive observations of highly-excited CO lines in emission in the far-infrared. The two data sets (absorption and emission) sometimes provide us with apparently inconsistent results. One case is starburst galaxies: Subaru observations showed low temperature of molecular gas toward the starburst NGC 253, while Herschel detected highly excited CO lines in the starburst. This suggests that warm molecular clouds are more deeply embedded than newly formed star clusters. The other case is obscured AGNs; Herschel detected highly excited CO lines in emission in nearby AGNs, while AKARI and Subaru observations showed CO absorption only in some of the obscured AGNs. This could reflect the difference of nature of molecular tori in these AGNs. We propose the combination of the absorption and emission observations as an effective tool to reveal geometry of warm molecular clouds in active galaxies.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.4
• /
• pp.23-30
• /
• 2001

In this paper, the discharge image of NO particles wire-cylinder type electrode in the discharge reactor where AC dielectric barrier type corona discharge occurred and horizontal and vertical signal intensity at each flourescence emission during discharge and the horizontal and vertical signal strength of NO particles at flourescence emission wavelength band[236[nm], 247[nm]], were measured were measured by ICCD Camera. In addition discharge images and signal intensities in accordance with discharge time were measured to figure out the discharge mechanism. It was found that the strongest horizontal and vertical signal intensity of NO particles were observed at 247[nm] band, but no big difference in the horizontal and vertical signal intensity in accordance with discharge time was seen. In particular, the phenomenon image occuring inside the discharge reactor and wavelength ware able to be carried based on the measured data.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.244-250
• /
• 2012

In this paper, worldwide standards and regulations on broadcasting services are reviewed to improve the fringe area of terrestrial DTV broadcasting services. Using these results, in-band/out-of-band emission requirements of low power DTV repeater with 10mW/MHz radiating power are proposed, and experimentally evaluated and verified. Using the proposed regulations, compact and cost-effective DTV repeater can be easily implemented to broaden DTV broadcasting coverage and to improve small/medium size DTV fringe areas.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.415.2-415.2
• /
• 2014

Cost-effective, robust devices for solid-state lighting industry that converts electricity to light revolutionize the current lighting industry. Phosphor materials used in these devices should be synthesized in a low-cost and effective method for use in WLEDs. In this presentation, the synthesis of Eu3+ ions doped BaMoO4 phosphor samples by a facile synthesis process for red component of WLEDs will be shown. The tetragonal phase of the host lattice was substantiated by the X-ray diffraction patterns. The morphological studies were carried out by using a field-emission scanning electron microscope and transmission electron microscope. These confirmed the formation of a shuttle like particles with perpendicular protrusions in the middle of the particle. The photoluminescence (PL) properties exhibited good emission with a high asymmetry ratio when excited with ultraviolet B wavelengths (~ 280-315 nm). The cathodoluminescence (CL) spectra showed similar results to the PL spectra, indicating the rich red emission. The results suggest that this phosphor is a good material as red region component in the development of tri-band UV excitation based WLEDs.

• Journal of Internet Computing and Services
• /
• v.16 no.6
• /
• pp.1-9
• /
• 2015

In this paper, we study the coexistence of typical radio access technologies (WiMAX, CDMA, WLAN) in heterogeneous networks. Although the radio accesses employ different frequency band, they can interfere with each other due to out-of- band emission. We compute the minimum adjacent channel interference ratio (ACIR) to satisfy the allowable level of interference, and the resulting minimum frequency separation (guard band) between interfering and victim system. We observe that WiMAX-WLAN coexistence and WiMAX-CDMA coexistence are feasible with at least 20 MHz and 15 MHz guard bands, respectively.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1576_1576
• /
• 2009

We present the design of an EMI filter to mitigate the electrical noise from the power supply over a broadband of a few tens of KHz to 18GHz. Admitting that our approach is not apart from the standard technology of EMI filter, it is worth checking out how we can implement the filter that meets the challenging spec. on band of operation. The function of the EMI filter is well-depicted by its performance on the CE(Conducted Emission) and RE(Radiated Emission) suppression through tests which convince us of its application to power supplies of land, water and flying vehicles.

• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.215-225
• /
• 2019

The mechanical behavior of rock is essential to estimate the capacity and long-term stability of $CO_2$ storage in deep saline aquifers. As the depth of reservoir increases, the pressure and temperature that applied on the rock increase. To answer the question of how the confining pressure and temperature influence the mechanical behavior of reservoir rock, triaxial compression experiments were carried out on brine-saturated sandstone at elevated temperature. The triaxial compressive strength of brine-saturated sandstone was observed to decrease with increasing testing temperature, and the temperature weakening effect in strength enhanced with the increase of confining pressure. Sandstone specimens showed single fracture failures under triaxial compression. Three typical regions around the main fracture were identified: fracture band, damaged zone and undamaged zone. A function was proposed to describe the evolution of acoustic emission count under loading. Finally, the mechanism of elevated temperature causing the reduction of strength of brine-saturated sandstone was discussed.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.50-55
• /
• 2015

We report design and simulation of a two-dimensional (2D) silicon-based nanophotonic crystal as an optical insulator to enhance the light emission efficiency of light-emitting diodes (LEDs). The device was designed in a manner that a triangular array silicon photonic crystal light insulator has a square trench in the middle where LED can be placed. By varying the normalized radius in the range of 0.3-0.5 using plane wave expansion method (PWEM), we found that the normalized radius of 0.45 creates a large band gap for transverse electric (TE) polarization. Subsequently a series of light propagation simulation were carried out using 2D and three-dimensional (3D) finite-difference time-domain (FDTD). The designed silicon-based light insulator device shows optical characteristics of a region in which light propagation was forbidden in the horizontal plane for TE light with most of the visible light spectrum in the wavelength range of 450 nm to 600 nm.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.193-196
• /
• 2005

This paper presents a Monte-Carlo based method to obtain a probability of interference among systems. We show an efficient algorithm to calculate not only in-band interference for a given emission mask, but out-of-band interference, which depends on the blocking performance of a victim receiver filter. Applying the proposed method to an arbitrary system, we show the simulation results by Matlab and compare them with those by a SEAMCAT software