• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.116-122
• /
• 2006

This study was carried out to compare physical properties of the horticultural substrates measured by the European standard methods (CEN methods) and the Rural Development Administration of Korea methods (RDA methods). Sixty horticultural substrates including 40 marketed substrates and 10 organic and inorganic raw materials such as peat moss, coir dust, rice hull, perlite and zeolite were sampled. The samples were then analyzed for 6 physical properties by both CEN methods and RDA methods. The results of both methods were analyzed by linear regression. Bulk density ($R^2=0.8304$), particle density ($R^2=0.8136$) and porosity ($R^2=0.6374$) values measured by the two methods were highly significant. Whereas those for easily available water (EAW, $R^2=0.3327$), water volume ($R^2=0.2692$) and air volume ($R^2=0.0739$) were not significant. Further research is needed to facilitate the conversion between the two methods.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.103-111
• /
• 2020

Pulling-type cutting devices, which use a diamond wire saw, have been used generally for cutting concrete structures. In this study, a pushing-type cutting device with a collection cover was developed by overcoming the disadvantages of pulling-type devices. In this device, dry or liquid methods can be selected to cool frictional heat. Operation and leakage tests of the dust generated during the dismantling of a concrete structure were carried out, confirming the suitable operation of the fabricated cutting device; the leakage rate was approximately 1.7%. For a conservative evaluation, the internal dose of workers was estimated in dismantling the core center part of biological shield concrete with a specific activity of 99.5 Bq·g^-1. The committed effective dose per worker was 0.25 mSv. The developed cutting device contributed to reducing radioactive concrete waste and minimizing worker exposure due to its easy installation. Therefore, it can be utilized as a cutting apparatus for dismantling not only reinforced concrete structures but also radioactive biological shield concrete in nuclear power plant decommissioning efforts.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.89-94
• /
• 2004

This study was carried out to investigate the suitability of various agricultural by-products as basal substrates for the mycelial growth and fruiting body formation of Hericium erinaceum. For this aim, oak sawdust, cotton waste, sugarcane bagasse, Job's tears, rice hull, Chinese cabbage, and coconut waste were used as sole or mixed substrate(s). Corn waste and rice bran were used as nutrient supplements. The growth and density of mycelium, yield of fruiting body, and biological efficiency were compared among tested substrates colonized by Hericium erinaceum. The best measurement of mycelial growth and density, yield of fruiting body, and biological efficiency in a laboratory test was found in a spawn substrate composed with oak sawdust 80% and rice bran 20%. The suitability of this spawn substrate composition for Hericium fruiting body production was testified through practical tests in plastic bottles (850 ml) in a mushroom farm which had bottle cultivation facility. However, test in a mushroom farm which had plastic bag cultivation facility, best production of Hericium fruiting body (520 g per one bag) was observed in a spawn substrate composed of cotton waste 40%, saw dust 40%, corn waste 10%, and rice bran 10%.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.281-293
• /
• 2022

We examined degradation characteristics of lead based pigments(white lead, Red lead, Litharge) according to atmospheric environmet condition, for example atmospheric gas(CO₂, NO₂) and soluble salt. Painted samples not changed material compositions but were occured the color change(𝚫E 4~31) after exposed UV irradiation. All sample were not affected by CO₂ gas not only color but chemical composition. However, samples were remakably changed color exposed NO₂ gas and it was formed secondary product like as lead nitrate. Such as red lead and white lead samples' color difference were 𝚫E 2 and 𝚫 10 respectively and became dark, along with litharge became bright and color difference was 𝚫E 5 after react with NO₂ gas. It confirm that NO₂ was influential factor than CO₂ in the case of same concentration. Furthermore salt spray test was taken to figure out soluble salt influence in fine dust. The result showed noticeable color change and secondary product was formed on samples' surface. The glue film peeled off or hole, and color changed around the secondary products. After salt spray, XRD pattern showed decrease peak intensity and lower crystalinity. As a result of salt spray test, white lead was formed new product litharge and litharge was formed litharge and minium. According to the results, influential atmospheric factors for conservation of paint pigments were UV, NO₂, soluble salt, and litharge was most weakness throughout lead base pigments.

• Applied Biological Chemistry
• /
• v.40 no.4
• /
• pp.342-346
• /
• 1997

Contents of heavy metals in paddy soils and brown rice of near the Kunsan industrial complex area were investigated. Average total heavy metal contents in paddy soils were Pb 34.33, Cd 0.50, Cu 35.49, and Zn 71.67 mg/kg respectively. There are no correlation between distances from industrial complex and contents of heavy metals in paddy soils. Average contents of heavy metals in brown rice grown above paddy soil were Pb 1.74, Cd 0.07, Cu 3.54, and Zn 16.53 mg/kg. Relationships between 0.1N HCl soluble heavy metals in paddy soils and contents of brown rice showed positive significant correlations for Pb at l% $level(r=0.6853^{**})$ and for Zn at 5% $level(r=0.5420^*)$. Relationships between total contents of heavy metals in paddy soils and contents of brown rice showed only positive significant correlation for Pb at 1% $level(r=0.7131^{**})$. Contents of heavy metals in paddy soils and brown rice of near the Kunsan industrial complex was polluted partly by the influence of smoke and dust out from industrial complex but not polluted anxious level

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.3-18
• /
• 1992

This research was carried out on 1,017 production workers for four months from May to August, 1991, to search more effective management method of their health by grasping their knowledge and attitude on industrial health. The results of this study can be summarized as follows: 1. As for general characteristics, 74.2% were male and 25.8% were female among the 1,017 workers. The two largest age groups were 30~39, 38.7%. As for education level, graduation from high school was 58.6%, 61.2% were married, 35.9% owned their house, and workers who worked more than 1 year less than 5 years was 52.9%, workers who worked 8 hours a day was 46.7%, the largest group income level was 60~69 thousand won 21.2%, and the degree of satisfaction with work was ordinary, 45.6%. 2. The degree of recognition concerning occupational diseases was 92.5% at a very high rate. Causes of occupational diseases under the present work field were in order of noise, dust, heavy metal. The largest group of the counterplan for prevention was an improvement of working environment, 62.0%. 3. The major cause that threatens worker's health was poor working environment, 31.4%. As the best method for workers' health management, working environment management was pointed. 4. As for health examination result, the response that it is of use to health management was 53.8%. As for examination method and result, 42.7% responded that they are formal. The practice period was more than once every six months as the largest group, and the highest desire for improvement was that they wants an exact information of the result. 5. 49.3% of the respondents know about the measurement of working environment an the response that the measurement is necessary to improve working environment was 57.9%, and that the results from the measurement were reflected on improvement an management 57.5%. Appropriate period to take a measurement was more than once per six months, 40.2% and per three months, 29.1%. 6. As for safety and halth instruction, 34.5% were educated for both, 38.2% for only safety education and just 4.6% for only health education. 51.9% responded that they had never been educated out of work place. The period of its practice was more than once a month, 39.5% and every three months, 21.3%. 7. The importance of safety and health showed that the one is equal to the other, 59.8%, that the one is more important, 29.6%, and that other is more important, 7.6%. 67.7% said the necessity of a safety and health manager. 8. In spite of more or less health obstacle of work environment, 14.9% of the respondents wanted to overwork to gain an allowance for over-time work, 39.9% didn't, and 40.2% according to condition and state. 9. As the most important cause of industrial accident, 40.2% indicated unsafe behavior. As for the individual protective instrument, 66.1% of all the respondents said they have worn it to protect industrial diseases. 10. As for the degree of understanding of the contents in Industrial Safety and Health Law and Industrial Law of Accident Insurance, an affirmative response was respectively 49.3% and 50.8% and the sources of safety-health information were televisions and radios, 28.0%. Therefore, it is necessary that we do positive working environmental improvement, continuous management and health education's inforcement to increase their health and prevent occupational diseases.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.723-737
• /
• 2021

This study analyzed the composition and structure of materials with Buddhist paper scriptures excavated from architectural sites in 'Sum Tolgoi' of the 17^th century and carried out conservation treatment base on the result of the analysis. The scriptures were covered in dust and foreign sub stances, and were so crumpled that it was impossible to identify the form. The damage, loss, and discoloration have been identified. Buddhist scriptures written in Tibetan used indigo and ink sticks on paper as a result of UV-Vis analysis, and ink sticks as black character materials from scriptures written ancient Mongolian. SEM-EDS and Micro-XRF analyses revealed that the outlines were drawn with red lines using a mix of Minium (Pb₃O₄) and Cinnabar (HgS), or Cinnabar (HgS) alone, and the contents of the scriptures were written with silver paint. Silver chloride (AgCl) and Calcium (Ca) were identified in the silver paint component of the characters, while Calcium and Orpiment (As₂S₃) were identified in the yellow lines. Concerning the paper ground, Buddhist scriptures written in ancient Mongolian were characterized by herbal plant fiber and bast fiber, and those written in Tibetan, by bast fiber. Radiocarbon dating indicates that the paper for the scriptures was produced between the 15^th and 17^th centuries. Conservation treatment of the scriptures was carried out based on the experiment on the production of pre-coated paper and how to coat that to prevent the second damage due to the deformation and fragility of the excavated paper. The scriptures were preserved and mounted, and a neutral box was made to identify the contents of the scriptures recorded on both sides after the treatment. This conservation treatment is the result of a study that applied new conservation treatment materials and methods according to the principle of conservation treatment reversibility.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.171-178
• /
• 2008

Metal filter elements were newly introduced to the high temperature filter(HTF) system in the low- and intermediate-level radioactive waste vitrification plant. In order to evaluate the performance of various metal materials as filter media, elements made of AISI 316L, AISI 904L, and Inconel 600 were included to the test set of filter elements. At the visual inspection to the elements performed after completion of each test, a few dark spots were observed on the surface of some elements. Especially they were found much more at the AISI 316L elements than others. To check the dark spots are the corrosion phenomena or not, two kinds of analyses were performed to the tested filter elements. Firstly, the surfaces or the cross sections of filter specimens cut out from both normal area and dark spot area of elements were analyzed by SEM/EDS. The results showed that the dark spots were not evidences of corrosion but the deposition of sodium, sulfur and silica compounds volatilized from waste or molten glass. Secondly, the ring tensile strength were analyzed for the ring-shape filter specimens cut out from each kind of element. The result obtained from the strength tested showed no evidence of corrosion as well. Conclusionally, depending on the two kinds of analysis, no evidences of corrosion were found at the tested metal filter elements. But the dark spots formed on the surface could reduce the effective filtering area and increase the overall pressure drop of HTF system. Thus, continuous heating inside filter housing up to dew point will be required normally. And a few long-period test should be followed for the exact evaluation of corrosion of the metal filter elements.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.135-147
• /
• 2015

Recent underground common utility tunnels are underground facilities for jointly accommodating more than 2 kinds of air-conditioning and heating facilities, vacuum dust collector, information processing cables as well as electricity, telecommunications, waterworks, city gas, sewerage system required when citizens live their daily lives and facilities responsible for the central function of the country but it is difficult to cope with fire accidents quickly and hard to enter into common utility tunnels to extinguish a fire due to toxic gases and smoke generated when various cables are burnt. Thus, in the event of a fire, not only the nerve center of the country is paralyzed such as significant property damage and loss of communication etc. but citizen inconveniences are caused. Therefore, noticing that most fires break out by a short circuit due to electrical works and degradation contact due to combustible cables as the main causes of fires in domestic and foreign common utility tunnels fire cases that have occurred so far, the purpose of this paper is to scientifically analyze the behavior of a fire by producing the model of actual common utility tunnels and reproducing the fire. A fire experiment was conducted in a state that line type fixed temperature detector, fire door, connection deluge set and ventilation equipment are installed in underground common utility tunnels and transmission power distribution cables are coated with fire proof paints in a certain section and heating pipes are fire proof covered. As a result, in the case of Type II, the maximum temperature was measured as $932^{\circ}C$ and line type fixed temperature detector displayed the fire location exactly in the receiver at a constant temperature. And transmission power distribution cables painted with fire proof paints in a certain section, the case of Type III, were found not to be fire resistant and fire proof covered heating pipes to be fire resistant for about 30 minutes. Also, fire simulation was carried out by entering fire load during a real fire test and as a result, the maximum temperature is $943^{\circ}C$, almost identical with $932^{\circ}C$ during a real fire test. Therefore, it is considered that fire behaviour can be predicted by conducting fire simulation only with common utility tunnels fire load and result values of heat release rate, height of the smoke layer, concentration of O2, CO, CO2 etc. obtained by simulation are determined to be applied as the values during a real fire experiment. In the future, it is expected that more reliable information on domestic underground common utility tunnels fire accidents can be provided and it will contribute to construction and maintenance repair effectively and systematically by analyzing and accumulating experimental data on domestic underground common utility tunnels fire accidents built in this study and fire cases continuously every year and complementing laws and regulations and administration manuals etc.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.333-344
• /
• 2011

Cleaning of foreign matter and corrosion products on surface among conservation treatment of iron artifacts is an important part for looking up a original form. The sand blaster is the most popular equipment when it removes the foreign matter and corrosion products on iron artifacts surface. Current foreign matter and corrosion products equipment, which mostly uses, is sand blaster. Glass dust which sprayed from sand blaster is harmful and causing environmental pollution. In order to solve these problems, we investigated the $CO_2$ snow cleaning that use a eco-friendly equipment to apply for cleaning foreign matter and corrosion products on surface of iron artifacts. It examined by using sand blaster and $CO_2$ snow cleaning to aged steel coupon and iron artifacts. In case of aged steel coupon, the result showed that the sand blaster and $CO_2$ snow cleaning methods were similar to the degrees of cleaning foreign matter and corrosion products, through surface roughness, color measurement and SEM. $CO_2$ snow cleaning applied to aged steel coupons weren't worn out the surface in comparison with sand blaster by SEM. When applied to the iron artifacts, power nozzle of the $CO_2$ snow cleaning was an excellent cleaning effect that surface wern't worn out in comparison with sand blaster. And, it showed that internal structure change of metal was no found before and after cleaning by X-ray radiography. Consequently, we confirmed that cleaning of the sand blaster and power nozzle of $CO_2$ snow cleaning were similar to the effect. But, it's very careful to use this method because of high outlet pressure of power nozzle for applying to the iron artifacts. As a result of experiments, it could be found that the cleaning methods should be selected depending on internal state of the artifacts.