• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.302-309
• /
• 2017

If a hydrogen explosion occurs in a containment building, its multiplex defense wall may be destroyed and a large amount of radioactive material may be released. The hydrogen occurred interacting with melting fuel rods must be effectively controlled and removed. however, the countermeasures for reducing explosion risk are difficult to carry out, due owing to the various variety of accident scenarios causes and the irregularity of hydrogen distribution and behavior. In this study, We examine the guide structures while considering the ambient flows, in order to improve the efficiency of PAR the widely used Passive Autocatalytic Recombiner(PAR). We simulate the fluid behavior and the hydrogen reduction rate were simulated when a guide is attached to the two-step catalyst PAR. For an upward flow, the consisting of a height of 150mm, a gap of 0mm, and a performs $60^{\circ}$ showed the best. In contrast, for a sideways flow, a consisting of the height of 150mm, a gap of 100mm, and a performs $60^{\circ}$ showed the best in the case of side ward flow. for a downward flow, a consisting of the height of 50mm and a directly attached guide produce the best in the case of down ward flow results.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.323-334
• /
• 2014

In this paper, experimental program and associated numerical study were carried out to evaluate the fire resistance of unprotected concrete-filled rectangular steel tubular (CFT) columns subjected to the standard fire. The key testing parameters included the length effect, the load ratio, and the sectional dimensions of the CFT columns. Temperature distribution and axial deformation of the CFT column specimens were measured and analyzed. Rather early local buckling of steel tubes was observed in all the specimens. This caused subsequent load transfer from steel tube to concrete, and eventually triggered concrete crushing, or complete loss of the load bearing capacity of the column. This implies that the limit state of local buckling as well as overall flexural buckling should be incorporated in fire design procedure. As expected, the fire resistance time of specimen with higher load ratio consistently lessened. The prediction of fire resistance time of unprotected CFT columns based on the limiting steel temperature in current design codes or the formula proposed by previous studies is slightly conservative compared to the fire test results available. To establish the finite element analysis model that can be used to predict the thermal and structural behaviour of unprotected CFT columns in fire, the fully coupled thermal-stress analysis was also tried by using the commercial code ABAQUS. The numerical results showed a reasonable global correlation with the experimental results.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.434-446
• /
• 2017

This study was carried out to suggest new indicators to be used at airports. Generally, passengers and cargo will be handled at the airport, and the airport will achieve revenues through them. However, all airports can not have the same distribution of passenger and cargo throughput. When comparing and analyzing several airports, a uniform result can be expected only if a unit airport throughput indicator is applied. The 'Work Load Unit' is an indicator that integrates passengers and cargo into one, and assumes that the value of one passenger is equivalent to the cargo volume of 100kg. The existing WLU was set up based on the experience at the airport rather than being established through reasonable grounds or analysis, so there was a lot of controversy. The purpose of this study is to overcome these limitations and to suggest new index. In this study, we applied a method to compare the relative value of cargo and passenger to airport revenue. In order to analyze cargo value and passenger value, airport revenues are classified into aircraft operation related revenues, passenger handling related revenues, and commercial revenues. A total of 50 airports were selected, including 14 airports in Asia, 18 airports in Europe and 18 airports in North America. According to the final analysis results, it is concluded that the cargo is equivalent to 280kg of cargo based on the contribution of one passenger averagely. This is higher than the value of 100Kg cargo per passenger.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.2
• /
• pp.86-94
• /
• 2000

In order to extract the spatio-temporal characteristics of long-term variability of the net heat flux on the sea surface in the East Asian marginal seas, empirical orthogonal function (EOF) analysis was conducted using data set calculated every 12 hours interval during 1978-1995. Among the first three modes explaining 73% of the total variance, the first mode having high peak at 1 year period indicates high variability area around the Sandong Peninsula and central and northeastern part of the East Sea. In the second mode which has spatial distribution of dipole type at the north and south, the peaks appear at 3.6 year and 2.3 year cycles. Time coefficient of the second EOF is believed to have close relation with the E1 Nino and has out-of-phase variation with NINO3 SST. Lagged correlation between NINO3 SST and time coefficient of the second EOF indicates four month time delay in the NINO3 SST. In the third mode which has opposite sign at the east and west, the periodicity of 6-9 year cycle has relatively clear appearance compared to other two EOFs. Also, high heat loss exceeding 800 W/$m^{2}$ in winter time occured at the south part of the Sandong Peninsula and Vladivostok. It reveals more frequent occurrence of about two times at the Sandong Peninsula than Vladivostok. The event is concentrated in January at Vladivostok, but it occurs primarily in December and January at the Sandong Peninsula.

• Journal of Mushroom
• /
• v.10 no.4
• /
• pp.191-197
• /
• 2012

This study was carried out to investigate proper modified atmosphere condition of king oyster mushroom (Pleurotus eryngii) during cold storage and distribution. King oyster mushrooms were divided into two treatments: $1{\mu}L/L$ 1-methylcyclopropene for 20 hours at $0^{\circ}C$ (1-MCP), while the other treatment was left at $0^{\circ}C$ (control). They were packaged with $30{\mu}m$ oriented polypropylene (OPP, $1238.0cc/m^2{\cdot}day{\cdot}atm\;O_2$), and microperforated (MP3, $3179.9cc/m^2{\cdot}day{\cdot}atm\;O_2$) film. Quality and sensory evaluation parameters of weight loss, stem firmness, skin color, off-flavor, overall quality were monitored after 3, and 4 weeks storage at $0^{\circ}C$ and plus 3 days on the shelf at room temperature. 1-MCP treated mushroom packaged with MP3 film kept 3.6~10.9% $O_2$ and 9.0~13.3% $CO_2$ concentration in the bag during storage, and showed high overall quality at 4 weeks storage at $0^{\circ}C$ + 3 days on the shelf at room temperature because of the lowest development of off-flavor, stem discoloration, and cap softening among the treatments.

• Korean Journal of Environmental Biology
• /
• v.38 no.3
• /
• pp.371-387
• /
• 2020

This study was conducted to investigate the flora of Mt. Unbongsan in the basalt areas of Korea. From the results of eight field surveys undertaken from March to October 2017, we identified 404 total taxa, representing 364 species, seven subspecies, and 33 varieties, which were placed in 256 genera and 91 families. The plant formation of Mt. Unbongsan is a deciduous broad-leaved and conifer mixed forest, which is common in the middle part of the Korean peninsula. Most of the mountain is covered by a young secondary forest, which is mainly composed of Quercus monglica and Pinus densiflora. Out of these 404 taxa, 193 were the first records for the region, six were endemic to Korea, three were listed on the Korean Red List of threatened species, 34 were floristic target species, and 40 were invasive alien species. The naturalized index(NI) percentage was 9.9%. Mt. Unbongsan has plant diversity, which was associated with the geomorphological landscapes. We considered that the composition and distribution of the species were affected by different environmental factors according to the presence of granite, taluses, block streams, drying ridges, valleys, puddles, wetlands, and streams.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.84-92
• /
• 2002

A $32{\times}32$ pixels foveated (linear-polar) structure retina chip with the function of local-light adaptation for edge detection has been designed and fabricated using CMOS technology. Human retina can detect a wide range of light intensity. In this study, we use the biologically-inspired visual signal processing mechanism that consists of photoreceptors, horizontal cells, and bipolar cells in order to implement the function of edge detection in the retina chip. For a local-light adaptive function, the size of receptive field is changed locally according to the input light intensity. The spatial distribution of sensing pixels in the foveated retina chip has the advantages of selective reduction of image data and good resolution in central part to carry out the elaborate image processing with still enough resolution in the outer parts. The designed chip has been fabricated using standard $0.6\;{\mu}m$ double-poly triple-metal CMOS technology and optimized using HSPICE simulator.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.355-360
• /
• 2004

In Korean beef market, one of the major problems is mislabeling or fraudulent distribution of Holstein dairy meat or imported beef as domestic Hanwoo meat. Therefore, there has been a great need for a development of technology to identify beef breeds in meat and meat products. This study was carried out to develop the accurate and reliable method for the identification of beef breed using PCR-RFLP marker of MC1R, MGF and TYRPl genes affecting coat colors in cattle. A single base substitution (G\longrightarrowT transition) at the codon for amino acid position 104 of MC1R gene was identified between Hanwoo and Holstein and Angus breeds. The change at this position creates Msp I restriction site in Holstein and Angus, but not in Hanwoo. When the DNA amplified products (537 bp) was digested with Msp I, Hanwoo meat showed a single band of 537bp, while two fragments of 329bp and 208 bp were observed in Holstein meat and Angus breed, respectively. Thus, breed-specific RFLP marker in the MC1R gene can be used to distinguish between Hanwoo meat and Holstein and Angus meats. In the RFLP genotype of MGF gene, the frequency of r/r type was 75％ in Manwoo, whereas the frequency of R/R was 80％ in Hereford breed. Holstein and Angus breeds showed 100％ for R/r type. Therefore, Hanwoo meat showed significant difference in the MGF genotype frequencies compared with those of Holstein meat and imported beef cattle breeds. However, TYRP1 gene showed the same genotype in all breeds examined. Thus, this TYRP1 gene can not be used as a molecular marker for breed identification. As a consequence, we suggest that RFLP markers of the MC1R and MGF coat color genes could be used as DNA marker for identification of Hanwoo meat from Holstein and imported meats.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.204-208
• /
• 1999

This study was carried out to investigate the chemical properties of rainwater in Taean area. The rainwater way collected for six months from May to Octotber in 1998, and analyzed its chemical composition. The ion balance and electric conductivity balance showed confidence to chemical analyses of rainwater. Distribution rates of pH of rainwater in Taean area were 43% and 38% in the range of pH $4.5{\sim}5.0$ and $5.0{\sim}5.6$, respectively. Among the 1mm fraction for initial 5mm of rainfall, ion concentration of initial rainwater (less than 1mm of rain) was higher than those of the later terms. The major ions in rainwater were $NH_4\;^+$ and $Ca_2\;^+$ for cations, and $SO_4\;^{2-}$ and $NO_3\;^-$ for anions. The pH value of rainwater showed the lowest level of 4.3 in August. The ratio of non-sea salt $SO_4\;^{2-}$ to $NO_3\;^-$ was 2.4.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.467-471
• /
• 2011

PET bottle is manufactured by blow molding the preform, which is molded by injection molding. The neck part of the preform of PET bottle for juice or grain-based beverage is crystallized before blowing to improve heat resistance at the entrance of the bottle. However, residual stress, developed during injection molding of preform, prevents the crystallization. In order to release the residual stress in the preform, the preform is annealed after the injection molding. If the residual stress is reduced by optimizing the injection molding conditions of preform the annealing time would be shortened. In this study, the optimum conditions for minimizing the residual stress and increasing dimensional accuracy of the injection molded preform are suggested through CAE analysis. In order to optimize the molding conditions, minimizing residual stress and shrinkage, computer simulations have been carried out with help of design of experiment scheduling. Injection temperature, initial packing pressure and filling time were selected for control parameters. Residual stress was affected by injection temperature and filling time. Shrinkage was affected by injection temperature. It was found that maximum residual stress, distribution of residual stress and shrinkage were decreased by 22%, 40% and 25%, respectively at an optimum molding condition compared with the results of previous molding condition.