• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.36-41
• /
• 2011

Meso-scale or micro-scale forming of sheet metal parts has been recently considered as one of the important forming technologies with growing demand on meso/micro products for electric or medical devices. Experimental investigation on the cylindrical meso-cup drawing with hemispherical punch is carried out to examine the limit drawing ratio and thickness distribution of drawn cups. The working parameters chosen in this study are blank diameter, die-corner radius and blankholding force. It is found from the experiments that the limit drawing ratio of 2.4 can be achieved in the case of hemispherical cup drawing and uniform thickness distribution in wider region can be obtained compared with the results of conventional cup drawing.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.12 no.3
• /
• pp.53-60
• /
• 2006

The medicine development and upwardly raised standard of living brings out the increased dental needs at dental hospital OPD. The dental college hospital, follows up the raised dental needs, was subdivided by specialized dental office. And now a specialized dental office needs co-work with the other specialized dental office for special dental illness and treatment. The purpose of this study is to provide a proper area distribution and location of each specialized dental office and relationship between dental office, clinic and other department by analyzing the space, area and characteristics of dental hospital OPD. The results could be used for helping its users, of patients and dentists.

• Journal of Urban Science
• /
• v.7 no.1
• /
• pp.23-27
• /
• 2018

This research was carried out to investigate the corrosion prevention effect in the water distribution system by galvanized zinc-brass pipe which is using potential between brass and zinc. As a result of this study, pH and conductivity of influent were constant in spite of its installation, and it was difficult to estimate the effect of the installation with temporary increased and reduced concentration of Zn and Fe ions, respectively. However, since the corrosion rate of the steel coupon with galvanized zinc-brass pipe was relatively low, it has an effect of inhibiting corrosion.

• Journal of Plant Biology
• /
• v.8 no.4
• /
• pp.1-6
• /
• 1965

Cytological observations were carried out to investigate the frequencies and geographical distribution of accessory chromosomes in rye in Korea. (1) All the 41 strains of rye investigated were found to have accessory chromosomes and the frequencies of accessories are ranged from 2 to 73.3%. (2) The frequency ranging from 30 to 40% was predominant and it included 13 different strains. (3) The edaphic factor seemed to play more marked role than the climatic factor in determining geographical distribution of accessories in rye in Korea. (4) Breakages of A-chromosomes into two fragments were observed in 11 plants. This phenomenon may throw some light on possible orgin of accessory chromosomes in rye.

• Tunnel and Underground Space
• /
• v.12 no.3
• /
• pp.198-209
• /
• 2002

To assess deep geological environment for the research and development of hish-level radioactive waste disposal, six boreholes of 3" in diameter were installed in two granitic areas. An areal extent of the rock block scale in the study sites was estimated by the lineament analysis from satellite images and shaded relief maps. The characterization of fracture system developed in rock block scale was carried out based on the acoustic televiewer logging in deep boreholes. In the Yuseong site, the granite rock mass was divided into the upper and lower zones at around -160m based on the probabilistic distribution characteristics of the geometric parameters such as orientation, fracture frequency, spacing and aperture size. Since the groundwater flow is dependent on the fracture system in a fractured rock mass, the correlation of the fracture frequency and cumulative aperture size to the hydraulic conductivity was also discussed.

• Progress in Superconductivity and Cryogenics
• /
• v.2 no.1
• /
• pp.31-34
• /
• 2000

this paper deals with the initial magnetic field decay for a large scale superconducting magnet e.g. NMR/MRI magnet. The high resolution image can not be obained during the periods of the initial field decay. It is known that all superconducting materials have the property of diamagnetism. This diamagnetism is usually explained with the concept of screening current. We assumed that the existence of the screening currebt. we assumed that the existence of the screening current makes the current distribution in the superconducting wire non-uniform. And the initial magnetic field decay is caused steady current state in the view of its pattern. The initial magnetic field decay is caused by the change of the current distribution between the energizing state and persistent current mode. in this paper the theoretical analysis for the current distributions has been introduced for each state. The experiments have been carried out to verify transport currents in order to veperiments, it small at the higher transport current.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1085-1086
• /
• 2008

An error prediction system (EPS) for a power distribution system can predict an out-of-order state based on gathered data from the system. This paper describes a software structure of an EPS that is equipped with various sensors. The software analyzes the gathered data from sensors and predict error symptoms using statistical methods. The EPS system is installed on a real power distribution system.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.12
• /
• pp.109-116
• /
• 2017

Short-lived pseudonym certificates as vehicle identities could satisfy both security and privacy requirements. However, to remove revoked certificates especially in vehicle communications, pseudonym certificate revocation list (CRL) should be distributed resource-efficiently from a practical deployment point of view and in a timely manner. In this paper, we propose a novel CRL distribution scheme capable of CRL multicast to only activated vehicles registered to the CRL multicast group using the group communication system enabler, namely, the GCSE which is being standardized. The scheme is resource efficient by using CRL distribution paths instead of paging processes to find out multicast vehicle(s) within a certain region. The analyzed results show that the proposed scheme outperforms in terms of paging cost, packets transmission cost, and the processing cost at the respective entities compared to the existing four schemes in the literature.

• Journal of Welding and Joining
• /
• v.19 no.3
• /
• pp.292-297
• /
• 2001

One of the major characteristics that affects the life of welded steel water pipes is the stress distribution caused by welding and external forces. Some studios have bean carried out on the residual stress of steel water pipes. But the results on the stress distributions by welding and complex external forces are rare, because real water pipes operate under the ground and many kinds of external forces act simultaneously on the joints. To understand the complex stress distributions of welded joints, therefore predictions by numerical or analytic methods are required. In this study, temperature and stress distributions in steel water pipes produced by welding are predicted by a three-dimensional finite element method(FEM). Based on these results, stress distributions by welding and complex external forces are evaluated by adopting the same numerical method. The influence of some post weld heat treatments on residual stress distributions is also investigated.

• Journal of Welding and Joining
• /
• v.25 no.3
• /
• pp.85-91
• /
• 2007

The conventional study on the laser surface transformation hardening has been carried out with a beam of the specified shape and uniform power-intensity distribution in order to ensure the uniformity of the hardening depth. Two types of beams - the circular gaussian beam and rectangular beam of the uniform power-intensity distribution were used in this study. we were supposed to optimize the process parameters and to compare the hardening results with two optics respectively. As a result, the hardness distribution of the hardened zone was similar in both cases and the hardened phase by the rectangular beam was denser than that by the circular gaussian beam.