• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1690-1695
• /
• 2003

In order to investigate the mechanism of brake squeal noise, the sound and vibration of an actua1 brake system were measured using a brake dynamometer. The experimental results show that disc run-out varies with brake line pressure and the factor of squeal generation is the run-out due to the misalignment of brake disk. A three degrees of freedom friction model is developed for the disk brake system where the run-out effect and nonlinear friction characteristic are considered. The results of numerical analysis of the model agree well with the experimental results. Also, the stability analysis of the model was performed to predict the generation of brake squeal due to the design parameter modification of brake systems. The results show that the squeal generation depends on the nm-out rather than the friction characteristic between the pad and the disk of brake.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.174-194
• /
• 2015

In this paper, an Energy Flow Analysis (EFA) for coplanar coupled Mindlin plates was performed to estimate their dynamic responses at high frequencies. Mindlin plate theory can consider the effects of shear distortion and rotatory inertia, which are very important at high frequencies. For EFA for coplanar coupled Mindlin plates, the wave transmission and reflection relationship for progressing out-of-plane waves (out-of-plane shear wave, bending dominant flexural wave, and shear dominant flexural wave) in coplanar coupled Mindlin plates was newly derived. To verify the validity of the EFA results, numerical analyses were performed for various cases where coplanar coupled Mindlin plates are excited by a harmonic point force, and the energy flow solutions for coplanar coupled Mindlin plates were compared with the classical solutions in the various conditions.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.51-55
• /
• 2002

End of July. 2002 Hyundai Heavy Industries Co. Ltd. Offshore Division is successfully completed Load-out & Float-off work of "AMENAM KPONO/FSO Project" similar to 300K VLCC size. The AMENAM FSO hull and topside module built at the HHI Offshore yard using "On-Ground Building Method" developed by HHI. Various methodologies/techniques like Flexi-built FPSO Hull. Topside module erection method. Load-out Float-off methodology etc. are combined to develop a successful on-ground building method. In this paper, we described the "Hull Structural Strength Analysis Methodology" using 3-D Finite Element Analysis and results. This analysis is performed to verily the structural integrity or the AMENAM FSO hull during the main load-out on two semi-submersible barges combined together.

• 한국조리학회지
• /
• 제14권4호
• /
• pp.257-268
• /
• 2008

The purpose of this study was to conduct factor analysis on Foodservice consumers' lifestyle patterns in dietary life, classify lifestyle patterns, and identify how lifestyle patterns influence the 5 stages of decision making process for purchase. Among 300 copies of the distributed questionnaire, 259 copies were collected for this study. It used a total of 283 copies as the effective samples for empirical analysis except 12 copies with false entries among them. For data analysis, it conducted frequency analysis, validity and reliability analysis, factor analysis, and multiple regression analysis using SPSS 12.0. As a result, Hypothesis 1 was significant while Hypothesis 2, 3, and 5 were partially significant. On the contrary, Hypothesis 4 was not significant. Therefore, lifestyle patterns had partially significant effects on decision making process for dining-out purchase. This study subdivided dining-out consumers' lifestyles which were limited to dietary life, and also subdivided decision making process for dining-out consumers' dining-out purchase into five stages. It is significant and very suggestive that this study identified what lifestyle patterns concretely had significant effects on the specific decision making stage. In the future, the researches on adolescent class and silver class should be executed continuously.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.307-314
• /
• 2016

Energy flow analysis(EFA) is a representative method that can predict the statistical energetics of structures at high frequencies. Generally, as the frequency increases, the shear distortion and rotatory inertia effects in the out-of-plane motion of beams or plates become important. Therefore, to predict the out-of-plane energetics of coupled structures in the high frequency range, the energy flow analyses of Timoshenko beam and Mindlin plate are required. Unlike the energy flow model of Kirchhoff plate, the energy flow model of Mindlin plate is composed of three kinds of energy governing equations(out-of-plane shear wave, bending dominant flexural wave, and shear dominant flexural wave). This paper performed the energy flow finite element analysis(EFFEA) of coplanar coupled Mindlin plates. For EFFEA of coplanar coupled Mindlin plates, the energy flow finite element formulation of out-of-plane energetics in the Mindlin plate was performed. The general EFFEA program was implemented by MATLAB® language. For the verification of EFFEA of Mindlin plate, the various numerical applications were done successfully.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.597-600
• /
• 2004

A two-degree-of-freedom out-of-plane model with contact stiffness is presented to describe dynamical interaction between the pad and disc of a disc brake system. It is assumed that the out-of-plane motion of the system depends on the friction force acting along the in-plane direction. Dynamic friction coefficient is modelled as a function of both in-plane relative velocity and out-of-plane normal force. When the friction coefficient depends only on the relative velocity, the contact stiffness has the role of negative stiffness. The results of stability analysis show that the stiffness of both pad and disc are equally important. Complex eigenvalue analysis is conducted for the case that the friction coefficient is also dependent on the normal force. The results further verify the importance of the stiffness. It has also been found that increasing the gradient of friction coefficient with respect to the normal force makes the system more unstable. Nonlinear analysis is also performed to demonstrate various responses. Comparing the responses with experimental data has shown that the proposed model may qualitatively well represent a certain type of brake noise.

• 복식
• /
• 제62권7호
• /
• pp.97-116
• /
• 2012

The purpose of this study is to analyze the trench coat designs shown in the latest collection by using a checklist method among many fashion design idea methods and then investigate the trend of trench coat design in multilateral directions. As for the research method, 1,307 photos selected from the photos of women's trench coats publicized from 2006 until 2011 were used for the analysis and then a frequency analysis was conducted. As a result, the types of checklist methods shown in trench coats included modification type, elimination type, conversion type, combination type, minimization type, addition type, and magnification type. In the modification type, the modification of color to the back side stood out; in the elimination type, the design eliminating epaulet stood out ; in the conversion type, conversion to jacket among many items stood out. In the combination type, the combination between different material texture and identical colors among colors stood out ; in the minimization type, the design minimizing sleeves stood out; in the addition type, the addition of sleeves among many details stood out ; in the magnification type, the design magnifying panels stood out.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.96-109
• /
• 1996

The airbag system is known to be extremely efficient for the protection in an automobile crash. The performance of the airbag system is evaluated by real tests. However, the test is very difficult and expensive. Therefore, the computational simulations are carried out with low cost. The airbag analysis is included in the anlysis of the full-car crashworthiness. The behavior of the airbag can be predicted by a thermodynamic analysis. The contact force between the occupant and the airbag is calculated from the contact volume and the pressure in the airbag. The injury rate is evaluated from the contact force and the acceleration of dummies. So far, the contact is defined after the airgag is fully inflated. In many cases, the occupant is seated in the out-of-position and the contact can happen during the inflation process. A new algorithm has been developed for the out-of-position. To describe the inflation process precisely, the airbag is defined by a sphere and a torus. The injury is evaluated for the contact happened at any time. The developed algorithm is coded and interfaced with an existing software in the public domain. The full-car modeling is adopted from the previous study which is tuned for the regular position and real tests. Numerical experimentation have been carried out with a couple of dummies in the out-of-position and the injury processes are analyzed.

• Advances in concrete construction
• /
• 제3권2호
• /
• pp.127-143
• /
• 2015

Steel fibre reinforced concrete (SFRC) is an anisotropic material due to the random orientation of the fibres within the cement matrix. Fibres under different inclination angles provide different strength contribution of a given crack width. For that the pull-out response of inclined fibres is of great importance to understand SFRC behaviour, particularly in the case of fibres with hooked ends, which are the most widely used. The paper focuses on the numerical modelling of the pull-out response of this kind of fibres from high-strength cementitious matrix in order to study the effects of different inclination angles of the fibres to the load-displacement pull-out curves. The pull-out of the fibres is studied by means of accurate three-dimensional finite element models, which take into account the nonlinearities that are present in the physical model, such as the nonlinear bonding between the fibre and the matrix in the early stages of the loading, the unilateral contact between the fibre and the matrix, the friction at the contact areas, the plastification of the steel fibre and the plastification and cracking of the cementitious matrix. The bonding properties of the fibre-matrix interface considered in the numerical model are based on experimental results of pull-out tests on straight fibres.

• 한국지반공학회논문집
• /
• 제24권8호
• /
• pp.43-52
• /
• 2008

본 연구에서는 단철근 네일과 다철근 네일의 인장강도를 조사하기 위해 단철근과 다철근 네일의 극한인발시험과 크리프시험을 수행하였다. 철근과 시멘트 그라우트의 부착력과 인장하중에 의해 유발된 마찰력, 하중전이 특성을 조사하였다. 단철근과 다철근 네일의 현장인발시험과 유한차분해석 프로그램의 하나인 $FLAC^{2D}$를 이용하여 얻은 결과를 분석하고 비교하였다. 다철근 네일의 현장인발시험결과 단철근 네일에 비해 인발파괴하중이 크고 하중전이가 큼을 알 수 있다.