• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제23권5호
• /
• pp.406-414
• /
• 2001

현재 악안면 보철 제작에 있어 재료로 실리콘이 제일 많이 사용되고 있으나 이 재료는 시간이 지남에 따라 점차 굳어져 가고 탄력성을 잃으며 원래의 색도 노랗게 변색되어 간다는 단점이 있다. 이러한 재료의 화학적 구성 단점 때문에 보철 생명력을 유지하기 위하여 환자들은 매 3년마다 새로운 보철물을 재 제작하여야 한다. 그렇다면 복잡했던 악안면 기공 과정을 다시 반복해야 하는 시간적, 물질적 손실을 감수해야 했다. 이러한 단점들을 보완하고 환자 피부색과 적합이 잘 되는 다양한 색의 실리콘 개발과 아울러 눈동자를 깜빡일 수 있는 인공 눈동자의 개발 등이 필요하며, 눈동자를 만드는데 사용되는 인공 수정체의 발전이 향후 악안면 보철 분야의 큰 과제라 할 수 있다.

• Journal of Periodontal and Implant Science
• /
• 제44권1호
• /
• pp.33-38
• /
• 2014

Purpose: Autogenous bones are frequently used because of their lack of antigenicity, but good osteoconductive and osteoinductive properties. This study evaluated the biological behavior of perforated and nonperforated cortical block bone grafts. Methods: Ten nonsmoking patients who required treatment due to severe resorption of the alveolar process and subsequent implant installation were included in the study. The inclusion criteria was loss of one or more teeth; the presence of atrophy of the alveolar process with the indication of reconstruction procedures to allow rehabilitation with dental implants; and the absence of systemic disease, local infection, or inflammation. The patients were randomly divided into two groups based on whether they received a perforated (inner surface) or nonperforated graft. After a 6-month healing period, a biopsy was performed and osseointegrated implants were installed in the same procedure. Results: Fibrous connective tissue was evident at the interface in patients who received nonperforated grafts. However, full union between the graft and host bed was visible in those who had received a perforated graft. Conclusions: We found that cortical inner side perforations at donor sites increased the surface area and opened the medullary cavity. Our results indicate an increased rate of graft incorporation in patients who received such perforated grafts.

• 대한치과보철학회지
• /
• 제53권2호
• /
• pp.120-127
• /
• 2015

목적: 4종의 임플란트 나사산이 골유착 중간과정과 완료 이후 단계에서 보이는 응력분산 특성을 평가하고자 한다. 재료 및 방법: 실린더형 몸체(외경 4.1 mm 길이 10 mm)에 이전연구에서 식립 특성이 우수하게 평가되었던 V-자형 나사산과 다른 3종(buttress형, reverse buttress형, square형)의 나사산을 가진 4종의 임플란트가 악골에 매식된 복합체 모델을 CAD 프로그램으로 제작하였다. 지대주 상부에 100 N의 힘을 임플란트 장축과 30도 방향으로 부하하고 인접골 응력분포를 유한요소 해석하였다. 응력분산 특성이 골유착 진척 상태에 따라 달라질 수 있다는 가정하에 임플란트/골 계면을 골유착 미숙단계와 골유착 완료단계의 두 가지로 구분하여 분석하였다. 골유착 미숙단계는 임플란트/골 계면을 비선형 contact 조건(마찰계수 0.3)으로 모사하였고, 골유착이 완료된 단계에 대해서는 계면이 충분히 결합된 것으로 간주하여 접합(bonding) 조건을 부여하였다. 결과: 골유착 정도에 따라 임플란트의 응력분산 특성이 달라졌다. 골유착 미숙단계에서는 골응력과 나사산에 따른 응력 특성의 차이도 상대적으로 컸고 골유착 완료단계에서는 골응력의 절대값과 나사산간 차이가 모두 감소하였으며, V-자형 나사산의 응력분산 특성은 골유착 미숙 및 완료단계에서 모두 4종 나사산의 중간 정도였다. 이로부터 나사산 디자인의 차이는 임플란트 식립후 골유착이 진행되는 과정까지 영향을 미치며, 일단 골유착이 완료되면 나사산의 영향은 급격히 감소할 것임을 추론할 수 있었다. 결론: V-자형 나사산의 응력분산 특성은 골유착이 이루어지는 단계와 완료된 이후 단계 전기간 동안 4종 나사산의 중간 정도였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권3호
• /
• pp.220-230
• /
• 1995

하악골에 발생한 치성점액종을 하악골 절제와 함께 혈관화 유리 비골판으로 재건한다음, 3개월째에 골내성 임프란트를 이용하여 편측하악골 결손을 기능적, 해부학적 및 심미적으로 회복하였다. 비골은 골내성 임프란트를 매식하기에 충분한 크기와 모양을 가지고 있었으며, 골질도 아주 치밀하였다. 미세혈관문합술을 이용한 유리 조직이전술과 임플란트 술식이 병행되어 앞으로의 치과 재건 영역에서 주요한 부분을 차지할 것으로 사료되었다.

• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.430-439
• /
• 2018

The treatment of craniofacial anomalies has been challenging as a result of technological shortcomings that could not provide a consistent protocol to perfectly restore patient-specific anatomy. In the past, wax-up and impression-based maneuvers were implemented to achieve this clinical end. However, with the advent of computer-aided design and computer-aided manufacturing (CAD/CAM) technology, a rapid and cost-effective workflow in prosthetic rehabilitation has taken the place of the outdated procedures. Because the use of implants is so profound in different facets of restorative dentistry, their placement for craniofacial prosthesis retention has also been widely popular and advantageous in a variety of clinical settings. This review aims to effectively describe the well-rounded and interdisciplinary practice of craniofacial prosthesis fabrication and retention by outlining fabrication, osseointegrated implant placement for prosthesis retention, a myriad of clinical examples in the craniofacial complex, and a glimpse of the future of bioengineering principles to restore bioactivity and physiology to the previously defected tissue.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.345-359
• /
• 2006

Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p$MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p$ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.

• Journal of Periodontal and Implant Science
• /
• 제31권4호
• /
• pp.749-763
• /
• 2001

Osseointegrated titanium implants have become an integral therapy for the replacement of teeth lost. For dental implant materials, titanium, hydroxyapatite and alumina oxide have been used, which of them, titanium implants are in wide use today. Titanium is known for its high corrosion resistance and biocompatability, because of the high stability of oxide layer mainly consists of $TiO_2$. With the development of peri-implantitis, the implant surface is changed in surface topography and element composition. None of the treatments for cleaning and detoxification of implant surface is efficient to remove surface contamination from contaminated titanium implants to such extent that the original surface elemental composition. In this sights, the purpose of this study was to evaluate rough surface titanium implants by means of scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS) with respect to surface appearance and surface elemental composition. Moreover, it was also the aim to get the base for treatments of peri-implantitis. For the SEM and XPS study, rough surface titanium models were fabricated for control group. Six experimental groups were evaluated: 1) long-time room exposure, 2 ) air-powder abrasive cleaning for 1min, 3) burnishing in citric acid(pH1) for 1min, 4) burnishing in citric acid for 3min, 5) burnishing in tetracycline for 1min, 6) burnishing in tetracycline for 3min. All experimental treatments were followed by 1min of rinsing with distilled water. The results were as follows: 1. SEM observations of all experimental groups showed that any changes in surface topography were not detected when compared with control group. (750 X magnification) 2. XPS analysis showed that in all experimental groups, titanium and oxygen were increased and carbon was decreased, when compared with control group. 3. XPS analysis showed that the level of titanium, oxygen and carbon in the experimental group 3(citric acid treatment for 1min, followed by 1min of distilled water irrigation) reached to the level of control group. 4. XPS analysis showed that significant differences were not detected between the experimental group 1 and the other experimental groups except of experimental group 3. The Ti. level of experimental group 2, airpowder abrasive treatment for lmin followed by 1min of saline irrigation, was lower than the Ti. level of tetracycline treated groups, experimental group 5 and 6. From the result of this study, it may be concluded that the 1min of citric acid treatment followed by same time of rinsing with distilled water gave the best results from elemental points of view, and can be used safely to treat peri-implantitis.

• 대한치과보철학회지
• /
• 제37권1호
• /
• pp.23-41
• /
• 1999

During the previous several decades the osseointegrated implants have been considered as the most ideal therapy for the fully edentulous or partially edentulous patients. Although the research on the biocompatibility of osseointegration, the oral tactile function, and the histo-neurologic study had been performed, the change of the oral tactile sensibility and maximal occlusal force according to the postinsertion time of implant prostheses has not been studied. The purpose of this study was to compare the oral tactile sensibility and maximal occlusal force of implant pros-theses to natural teeth according to the specific postinsertion time intervals. The fifty seven patients treated with $Br{\aa}nemark$ implants during the recent seven years were involved in this study. The oral tactile sensibility and maximal occlusal force were measured according to the postinsertion time (${\leqq}6\;months,\;{\leqq}12\;{\leqq}\;18\;months\;{\leqq}\;24\;months,\;and\;{\geqq}20\;months$) 1. The passive tactile threshold of implants was higher than 6-7 times when comparing to natural teeth(P<0.05) 2. The absolute pressure threshold in horizontal and vertical direction for the passive tactile sensibility had decreased significantly in the post insertion time 13-18 months group and had increased significantly in the post insertion time over 25 months group (P<0.05) 3. 50% limit thickness and 100% absolute thickness for the active tactile sensibility had decreased significantly in the postinsertion time 7-12 months group ($AT_{50}:P<0.005,\;AT_{100}:P<0.05$) 4. The maximal occlusal force of the implants prostheses had decreased when comparing with natural teeth in the postinsertion time 1-6 months group(P<0.05) and after that there was no significant difference between the implant prostheses and natural teeth(P<0.05) 5. Maximal occlusal force according to the postinsertion time had increased significantly in the 13-18 months group (P<0.05) after that there was no significant difference. 6. There was positive correlation between age and oral tactile sensibility tested in horizontal and vertical direction ($P_{H:r}=0.39,\;P_{v:r}=0.41$) and there was no correlation between age and maximal occlusal force, age and active tactile sensibility 7. According to the results or the questionnaire, 76.6% of the patients were satisfied with the function and 96.7% of the patients were satisfied with the sensibility. In conclusion oral tactile sensibility and maximal occlusal force of implants have changed with the postinsertion time. Oral tactile function of implants was lower than that of the natural teeth, but for the maximal occlusal force there was no difference between implants and natural teeth.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권1호
• /
• pp.135-143
• /
• 1996

이 연구의 목적은 성견의 발치와에 식립된 implants에 새로운 골 형성을 유도할 목적으로 사용한 흡수성막의 골유도재생술을 평가하고자 하였다. 성견의 제 3소구치를 발거하고 cylindrial HA-coated implants를 식립하였다. 실험군에는 흡수성막인 $GUIDOR^{(R)}$ 를 덮어 보호를 하고, 대조군은 막으로 보호하지 않았다. 성견은 1, 2, 4개월에 차례로 희생하였으며, 치유과정 및 골형성 정도의 평가를 위해 임상적, 방사선학적, 그리고 조직학적 관찰을 통한 다음과 같은 결론을 얻었다. 1. 치유리간 동안에 실험군의 흡수성막의 안정성과 조직의 만족할 만한 치유능력을 볼 수 있었다. 2. 술후 4개월 정도에서 막이 완전한 흡수를 볼 수 있었다. 3. 미숙골이 정상적인 충판의 성숙골로 바뀌는데 약 4개월의 시간이 필요하였다. 4. 대조군에 비하여 실험군에서 더 많은 골형성을 관찰할 수 있었다. 5. 흡수성막이 implant 매식에 유용하게 이용될 수 있으리라 평가한다.

• 대한치과교정학회지
• /
• 제33권4호
• /
• pp.307-317
• /
• 2003

본 연구는 miniplate(Titanium C-tube, Martin Co., Germany)를 교정적 고정원으로 사용하여 교정력 및 악정형력을 즉시 가했을 때 miniplate의 안정성 및 주위 조직 반응을 관찰하여 고정원으로서의 유용성을 밝히고자 시행되었다. 네 마리의 비글 성견을 대상으로 하악의 좌우 협측 제3소구치와 제4소구치 사이에 두개의 titanium miniscrew(직경 2.0mm, 길이 7.0mm)에 의해 고정되는 miniplate를 식립하여 15주 동안 200-250gm의 힘을 가한 교정력 적용군과 8주 동안 400-450gm의 힘을 가한 악정형력 적용군으로 분류하였고 대조군은 제4소구치와 제1대구치사이에 식립하고 힘을 가하지 않았다. 동요도는 식립 직후와 희생 직전에 측정하여 비교하였고 희생 후 제작된 조직 절편을 방사선적으로 검사하여 주위 골의 흡수 여부를 관찰하였다. 실험 동물은 관류 고정하고 조직 절편은 레진 포매하여 비탈회 경조직 표본을 제작하였다 miniplate 제거 후의 조직의 치유와 연조직의 관찰을 위해 일부 조직편은 탈회 표본으로 제작하였다. 표본은 H&E 염색 후 광학 현미경하에서 검경하였고 위의 실험내용을 통해 다음과 같은 결과를 얻었다. 1. 교정력과 악정형력을 적용한 두 그룹 모두 miniscrew와 골간의 계면에는 직접적인 골유착이 일어났다. 힘의 크기에 따른 차이는 관찰되지 않았고, 힘의 적용기간이 증가함에 따라 골침착이 증가되었으며, 하중이 가해지지 않은 대조군이 실험군에 비해 골조직이 덜 침착되었다. 2. Miruplate와 miniscrew를 피개하고 있는 연조직은 염증소견 없이 모두 치유가 잘 일어났다. 3. 모든 실험군에서 동요도는 발생되지 않았고, 하중이 가해지지 않은 대조군의 경우 경미한 동요도를 보였으며, 교합력이 직접 가해진 대조군에서 고정원이 탈락될 정도의 동요도를 보였다. 4. Miniscrew 제거 후의 연조직 및 경조직은 정상조직의 형태와 구조로 치유되었다. 이상의 결과로 miniplate(Titanium C-tube, Martin Co., Germany)는 식립 즉시 악정형력 정도의 힘까지 수용할 수 있고, 인접 조직에 자극이 적은 골내 고정원으로서 충분한 가치가 있다고 판단되어 진다.