• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.605-606
• /
• 2021

In this paper, one channel oscilloscope was implemented using arduino uno board and 1.8 inch TFT LCD. The oscilloscope is designed using the built-in analog to digital converter(ADC) inside arduino uno board as data acquisition unit and can handle up to about 1 KHz signal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.37-42
• /
• 2022

Recently, with the development of mobile communication technologies such as 5G, interest in oscilloscope technology based on high bandwidth and user-friendly UI is increasing. In this paper, we proposed a Python-based UI(user interface) SW for a high-bandwidth digital oscilloscope in connection with the study of a 13GHz band digital oscilloscope system. The proposed UI SW is designed not only to be executed integrally with the oscilloscope, but also to be run on a separate PC or laptop cooperating with the instrument through WiFi communication. Functions of the UI SW consists of displaying and analyzing signal data, storing signal data in an external storage device, generating test signal data, and reconfiguring the toolbar. Finally, we have shown that the proposed digital oscilloscope system operates normally by interworking test with the signal generator.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.53-64
• /
• 2004

The CRT(cathode ray tube) in oscilloscope consists of an electron gun, horizontal vertical deflection system and a phosphor screen. When the electron beam strikes the phosphor screen, the phosphor generates light. The phosphor screen has formed by CRT precipitation method. But, this method has some defects that are complex process, low yield, much consumption of raw-material, dirty working environment, waste problem, require of high cost. Moreover phosphor for oscilloscope used at present has been imported from Japan. Therefore developments of new phosphor and new method(the screen printing) top form phosphor screen for oscilloscope are required to improve these matters. This study was developed novel method(the screen printing) to form the phosphor screen for oscilloscope used new phosphor. This screen printing method has advantages of simple process, high yield, clean working environment, saving raw material and running-cost.

• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.327-333
• /
• 1997

We designed and constructed the high frequency magnetic characteristics measurement system to measure core loss, B-H curve, permeability of toroidal ferrite core, amorphous core and various materials for high frequency application. The system consists of universal equipments such as digitizing oscilloscope, signal generator, power amplifier, PC in order to make upgrade easily. The power source is composed of waveform synthesizer and power amplifier ranging from DC to 20 MHz, and output signal H and B from sample core are digitized by oscilloscope with sampling rate 1 GS/ s per channel. Computer controls power source and oscilloscope, reads data from oscilloscope, displays analyzed waveform and saves data with file. The entire procedures finishes within few seconds.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1804-1809
• /
• 2017

A data acquisition (DAQ) system based on oscilloscope was developed and evaluated for radiation detector. The dedicated LabVIEW program that perform the oscilloscope control and the data process was developed. Triggered events for each analog channel were acquired and the output signals were subsequently digitized and recorded for offline processing. Radiation pulse generation circuit was developed to evaluate the intrinsic characteristics of DAQ system. Energy linearity and energy resolution performances were assessed by voltage-peak channels and FWHM obtained from Gaussian fit, respectively. Radiation detector consists of LYSO and GAPD array. The 16 output signals were multiplexed by the RCD networks, and they were fed into the custom-made preamplifiers. Voltage-peak channels was linearly changed as a function of input voltage and the estimated coefficient of determination ($R^2$) was 0.999. No considerable changes in voltage resolution were observed. All 16 crystals were clearly identifiable on the resulting flood image and the mean energy resolution was ~15.1%. This study demonstrated that it is feasible to develop the DAQ system based on oscilloscope and LabVIEW program for radiation detector and the proposed approach offers opportunities to build simple DAQ system in various radiation measurement field.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.31-36
• /
• 1997

In this paper, a digital oscilloscope is implemented using a C54x DSK with PC. This digital oscilloscope has some basic measurement functions with a capability to change Volt/Div and Time/Div as well as to set appropriate trigger level automatically. Also several stored waveforms and current input waveform can be displayed simultaneously. Experimetal results show that our approaches are versatile and cost-effective particularly in educational installment.

• 전기의세계
• /
• v.20 no.1
• /
• pp.19-23
• /
• 1971

In testing the moving balance of a rotor instead of strobotron system here to for in use, making the pick up touch the rotor without putting the subject on the testing table, we can observe both the corrected original point and its unbalance point which appeared on the Braun tube screen with naked eyes. Then we can do our correcting job with rapidity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.344-352
• /
• 2018

We herein propose a calibration method for a sampling oscilloscope. The proposed method can correct the systematic errors in the oscilloscope such as time-based distortion and impedance mismatch. In addition, it can accurately estimate the residual jitter that remains after a time-based correction and the scale factor that varies in accordance with the setting of the pulse generator. The proposed method is validated thorough the comparison and verification with the power meter, and the uncertainty of the measurement method is analyzed.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.113-118
• /
• 1989

By using the single mode optical fiber, we fabricated Fiber-optic Fabry-Perot interferometer (FFPI). The change over a wide range in the optical path length of a FFPI is observed. The temporal movement of the interference fringes by external condition to P.Z. T) is converted to circular motion on an oscilloscope display and then recorded with a micro-computer. The two output voltages of the D/A converters are applied to X and Y terminals of oscilloscope to display circular motion on oscilloscope. Thus the direction of phase shift can be determined with observing the direction of circular motion. The variation of the optical length can be measured by calculating the angle of spot of circle with an accuracy of λ/90 wave length due to variation of temperature in this system 2.7x10-4$^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.506-510
• /
• 2005

As FPD technology is getting improved, there are a lot of issues on signal processing and analysis, and its relative importance has been increasing day by day. In particular, response time sad in the evaluation item of FPD has been measured by oscilloscope. In this paper, we propose an effective measurement method of response time in FPD. The proposed method is to calculate the rising/ falling time by using statistical techniques of histogram and analyzing an energy distribution. Ultimately, the method has proved the utility and reliability by comparison of oscilloscope