• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.48-53
• /
• 2009

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions are tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• 한국경영과학회지
• /
• 제32권3호
• /
• pp.33-46
• /
• 2007

This study deals with the adaptive multiuser OFDM (Orthogonal Frequency Division Multiplexing) system which adjusts the resource allocation according to the environmental changes in such as wireless and quality of service required by users. The resource allocation includes subcarrier assignment to users, modulation method and power used for subcarriers. We first develop a general optimization model which maximizes data throughput while satisfying data rates required by users and total power constraints. Based on the property that this problem has the 0 duality gap, we apply the subgradient dual optimization method which obtains the solution of the dual problem by iteration of simple calculations. Extensive experiments with realistic data have shown that the subgradient dual method is applicable to the real world system, and can be used as a dynamic resource allocation mechanism.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.62-65
• /
• 2000

In this paper we propose skewed angle detection methods for images that contain text that is not aligned horizontally. In most images text areas are aligned along the horizontal axis, however there are many occasions when the text may be at a skewed angle (denoted by 0 < ${\theta}\;{\leq}\;{\pi}$). In the work described, we adapt the Hough transform, Shadow and Threshold Projection methods to detect the skewed angle of text in an input image using the orthogonal angle view property. The results of this method are a primary text skewed angle, which allows us to rotate the original input image into an image with horizontally aligned text. This utilizes document image processing prior to the recognition stage.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.98-104
• /
• 2009

The objective of this paper is to investigate the effect of factors on the dynamic stiffness variation of boring bar. The experiment was carried out by Taguchi Method and Orthogonal array table. The results indicate that overhang was found out to be dominant factor with 95% confident intervals and feed rate and depth of cut were insignificant. In addition, analysis of loss function shows that loss value increased sharply from 3D to 4D(D is a shank diameter). Consequently, there is critical point which changes property of dynamic stiffness.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.145-154
• /
• 2000

본 논문에서는 제어대상의 사전정보가 미지인 경우의 동정 및 제어를 위하여 직교함수 신경회로망을 제안한다. 제안하는 직교함수 신경회로망은 은닉층 앞에 버퍼층을 사용하고 은닉층에는 시그모이드 함수와 시그모이드 함수의 도함수로 유도한 RBF를 이용한 직교함수를 사용하였다. 제안한 방식의 유용성을 확인하기 위하여 Narendra 모델의 동정 시뮬레이션에 의해 동정능력을 검토하였다. 또한, 제어 시스템을 구성하고 시뮬레이션 및 실험을 통하여 유용성을 확인하였다.

• 한국염색가공학회지
• /
• 제2권1호
• /
• pp.14-20
• /
• 1990

The cotton fabrics were treated with formaldehyde in the presence of zinc nitrate catalyst and urea. The effects of HCHO concentration, urea concentration, catalyst ratio, cure time and cure temperature on the physical properties of fabrics were studied. Cotton fabric finished with HCHO and urea had the lower tensile strength and tear strength than untreated one. These strength losses resulted from tighter oxymethylene crosslinks. The enhanced wrinkle recovery for fabric treated with formaldehyde in the presence of urea was indicative of the formation of urea-formaldehyde polymer. These experimental conditions were set up according to table of orthogonal arrays.

• 한국통신학회논문지
• /
• 제32권12A호
• /
• pp.1219-1225
• /
• 2007

본 논문은 4개의 송신 안테나를 사용 할 경우 임의의 QAM 변조 방식과 준정지 Rayleigh 페이딩 채널 환경에서 최대 다이버시티 이득을 획득하고 더불어 full-rate을 획득하는 새로운 QO-STBC(quasi-orthogonal space-time block code)를 제안한다. 특히 제안된 부호는 기존의 MDC-QO-STBC(minimum decoding complex QO-STBC)와 같이 준직교 특성을 만족하여 수신단에서 2개의 실수 심벌들로 구성된 4개의 그룹들에 대하여 각각 독립적인 ML(maximum likelihood) 복호가 가능하다는 장점을 갖는다. 전산 실험 결과 제안된 부호는 모든 변조 방식들에 대하여 MDC-QO-STBC와 동일한 비트 오율(BER) 성능을 보여준다. 하지만 제안된 부호는 모든 송신 안테나들에서 성상 회전 이전의 신호들에 비해 PAPR(peak-to-average power ratio) 값들이 증가하는 기존의 MDC-QO-STBC와 달리 오직 2개의 송신 안테나들에서만 PAPR의 증가가 발생하도록 수정 가능하며 따라서 실제 송신 시스템 구현 시 훨씬 큰 이점을 갖게 된다.

• Journal of applied mathematics & informatics
• /
• 제32권1_2호
• /
• pp.285-295
• /
• 2014

In the setting of semidenite linear complementarity problems on $S^n$, we focus on the Stein Transformation $S_A(X)\;:=X-AXA^T$, and show that $S_A$ is (strictly) monotone if and only if ${\nu}_r(UAU^T{\circ}\;UAU^T)$(<)${\leq}1$, for all orthogonal matrices U where ${\circ}$ is the Hadamard product and ${\nu}_r$ is the real numerical radius. In particular, we show that if ${\rho}(A)$ < 1 and ${\nu}_r(UAU^T{\circ}\;UAU^T){\leq}1$, then SDLCP($S_A$, Q) has a unique solution for all $Q{\in}S^n$. In an attempt to characterize the GUS-property of a nonmonotone $S_A$, we give an instance of a nonnormal $2{\times}2$ matrix A such that SDLCP($S_A$, Q) has a unique solution for Q either a diagonal or a symmetric positive or negative semidenite matrix. We show that this particular $S_A$ has the $P^{\prime}_2$-property.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.103-111
• /
• 2008

This study proposes a technique to estimate the material property of a paper by using an experimental methods and commercial CAE software. Under gravitation, if one side of the paper is attached to the ground, the opposite side of paper is largely deformed, and vibrates freely. Since the paper has an orthotropic characteristic due to its treatment, the deformations in two orthogonal directions of the dry paper are different. An experimental method to measure the static deformation of the paper introduces this phenomenon. And dynamic behavior, frequency of free vibration is measured. And then. virtual prototypes that can represent the static and dynamic behavior are modeled by using the commercial CAE software $RecurDyn^{MT}$/MTT3D, which has been widely used by the printer makers. While comparing the deformation and frequency from the experiment and simulation, a design optimization technique in the commercial CAE software of R-INOPL, $RecurDyn^{TM}$/AutoDesign is used to estimate the material property such as Young's modulus, shear modulus and density of the paper.

• ETRI Journal
• /
• 제28권2호
• /
• pp.155-161
• /
• 2006

In this paper, we introduce an escalator (ESC) algorithm based on the least squares (LS) criterion. The proposed algorithm is relatively insensitive to the eigenvalue spread ratio (ESR) of an input signal and has a faster convergence speed than the conventional ESC algorithms. This algorithm exploits the fast adaptation ability of least squares methods and the orthogonalization property of the ESC structure. From the simulation results, the proposed algorithm shows superior convergence performance.