• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.313-333
• /
• 2017

As science and technology advanced, specialized and massive, development through mutual cooperation or research based on patent licensing such as material transfer contract, technology transfer contract etc are actively taking place to minimize or separate the cost and risk of R&D. In R&D, such mutual work can enjoy the merit of division of labor by effectively allocating resources and manpower to accomplish its goal. Inevitably, however, there are also many possibilities of disputes regarding the ownership and use of intellectual property rights resulting from such mutual/post-studies, or inventions upgraded by using prior patents. The case reviewed by this paper is noticeable regarding the recent trend of upgraded inventions. In the case, a pharmaceutical company conducted tests/assessments on the complete technology of patent owned by a university on the premise of transferring the technology, and then terminated the technology transfer contract due to reasons of toxicity. The university then filed a damage claim suit against the company for infringing the contract. This is a dispute case betw een a university which developed a potential ingredient for new medicine and a pharmaceutical company which agreed to transfer and receive the technological later on. Regarding the upgraded inventions of source patents, this case has many implications on the protection of prior patents, research contract, and research security to protect the accomplishment of research. This paper reviews the subject ruling and the protection of upgraded patents and source technologies. As critical notes, the paper also summarizes the major issues of case ruling to observe the standard of ruling patent infringement related to the extortion of upgraded patents. Then, through the ruling of the case above, the paper suggests implications and future strategies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.635-643
• /
• 2017

The purpose of this study is to investigate the influence of the cold reduction rate and an ultrasonic fatigue test (UFT) on the fatigue behaviors of STS 304L. The tensile strength, yield strength, hardness value and fatigue limit in the UFT fatigue test linearly increased as thickness decreased from 1.5 mm to 1.1 mm, as the cold reduction rate of STS 304L increased. As a result of the UFT fatigue test (R = -1) of four specimens, the fatigue limit of the S-N curve formed a knee point in the region of $10^6$, and the 2nd fatigue limit caused by giga cycle fatigue did not appeared. In the case of t = 1.1 mm, the highest fatigue limit was 345 MPa, which was 64.3% higher than the original material (t = 1.5 mm). As a result of the UFT fatigue test of STS 304L, many small surface cracks occurred, grown, coalesced while tearing.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.268-274
• /
• 2015

Weld overlay was first used in power plants in the US in the early 1980s as an interim method of repairing the welds of flawed piping joints. Weld overlaid piping joints in nuclear power plants must be examined periodically using ultrasonic examination technology. Portable phased array ultrasonic technology has recently become available. Currently, the application of preemptive weld overlays as a mitigation technique and/as a method to improve the examination surface condition for more complex configurations is becoming more common. These complex geometries may require several focused conventional transducers for adequate inspection of the overlay, the original weld, and the base material. Alternatively, Phased array ultrasonic probes can be used to generate several inspection angles simultaneously at various focal depths to provide better and faster coverage than that possible by conventional methods. Thus, this technology can increase the speed of examinations, save costs, and reduce radiation exposure. In this paper, we explain the general sequence of the inspection of weld overlay and the results of signal analysis for some PAUT (phased array ultrasonic testing) signals detected in on-site inspections.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.41-52
• /
• 2002

At the beginning of the modern times, orientalism and ethnic character was the main stream of current fashion. Early in the twentieth century, orientalism had a tremendous affect on various areas of society, culture, and art. Particularly, it inspired and activated the design of costume. A great variety of colors and construction of the Orient and geometrical simplicity were based on the creation of modern costume. Ethnic placed weight on the Orient because Japan strengthened competitiveness and China opened the door to foreign countries. Therefore, a large number of the oriental costume produced by a variety of fashion designers. The oriental handicraft, motif and colors of the traditional costume have been used in modern costume. In addition, they are precious ideas for designers. This thesis is about a Study on costume embroidery close to fashion through the oriental embroidery and the concept of oriental embroidery. It is also a study on patterns, skills and colors of the oriental embroidery shown in modern fashion and practical use through the designers works. First, concept, process of change, patterns, skills and colors of the oriental embroidery are mainly discussed. 1.The oriental embroidery consists of life, Buddhism, appreciation and costume embroidery. Embroidery was widely used for a variety of purposes. First, it is to make a good impression and beauty. Second, to decorate many kinds of patterns and shapes. Last, to indicate social status and stages. 2.The origin of the oriental embroidery started in Persia. was It greatly developed in Iran and was introduced in Korea via China. We are reminded of the oriental embroidery of China. China is the original place of oriental embroidery. Oriental embroidery has developed the peculiar embroidery according to each climate, custom and nationality. On the basis of these, the practical use of the oriental embroidery on modern fashion is presented through patterns, skills and colors which leads Korean designers use. Even though the oriental embroidery is not very popular among people owing to a great deal of cost and a demand for labor, the patterns and colors of the embroidery has been already familiar with the contemporaries A more profound study on the oriental embroidery will supply a great deal of material and ideas to the fashion industry. Moreover, an effort to raise self-pride in traditional culture will be also in need.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.101-110
• /
• 2011

Charcoal burning in the process of manufacture and ordinary use often release many constituent chemical species. As a result of open burning, the chemical composition as well as the physical properties of original material changes through the modification of surface properties of charcoal. Surface modification could be more responsible toward the outside elements for surface adsorption, it becomes easy to adsorb more toxic elements through surface adsorption. In this study, four kinds of commercially available charcoal were studied against the chemical and thermal stability along with the heavy metals and organic hazardous substances. Thermo gravimetric analysis (TGA) and differential scanning calorimetry, from room temperature to $400^{\circ}C$, were performed to study the weight loss and the changes in the behavior of those substances. According to TGA analysis, about 10% of weight loss was happened before $200^{\circ}C$. It was found that related weight loss of this temperature region may responsible to the gas phase organic matter. Natural charcoal, K1 and C1 show 15% of loss during the reaction heated to $400^{\circ}C$, while the artificial charcoal K2, C2 show the weight loss of about 20% was found. This is consistent with the main organic matter and VOC analysis results shown. Chemical composition based on the x-ray diffraction analysis was carried out. X-ray diffraction analysis reveals the existence of chemical additive in the forms of $Ba(NO_3)_2$, $BaCO_3$, and $NaNO_3$.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.439-444
• /
• 1997

Twelve kinds (1set) standard materials of chemical ingredients of lead zirconate titanate[$Pb(ZrTi)O_3$] have been developed in order to determine fast and accurate measurement of X-ray fluorescence spectrometry. Especially, we used diluted(ahout sixteen times) filling compound($Li_2B_4O_7/LiBO_2=4/1$) to consider removal effect of matrix, storage convenience, and homogenous characteristics. As a result from the four different laboratories, we obtained extremly good agreement about the standard curve on twelve standard materials which containing eleven elements, PbO, $ZrO_2$, $TiO_2$, SrO, $WO_3$, $La_2O_3$, $Cr_2O_3$, MgO, $Nb_2O_5$, and $MnO_2$. The correlation factor of standard curve was over 0.998. However, ZnO has relatively low correlation factor, 0.977, because the concentration was 10ppm lower than other original materials. This analysis reveals that ZnO has shown the poor linearity as well as low fluorescence intensity. In present work, XRF standard materials are useful for determining a rapid and accurate results for major and minor elements concentration among PZT.

• Applied Microscopy
• /
• v.36 no.3
• /
• pp.227-234
• /
• 2006

To investigate the comparative effect of spherical and aspherical RGP lens were worn during 3 weeks on rabbit's cornea. Four white rabbits were worn right eyes with spherical lens and 4 white rabbits were worn right eyes with aspherical RGP lens. Left eyes were served as control. The rabbits were sacrificed at 3 weeks after fitting and observed morphological changes by scanning electron microscopy and also investigate proliferation rate of the corneal epithelium with RGP wearing. After spherical RGP lens wearing, the epithet layer damaged compared to aspherical lens. The superficial cell layer strip off seriously, cell size significantly changed abnormal. Both spherical and aspherical RGP lens fitting group showed so many bacteria and back surface of lens was found like a fern shape. The aspherical RGP lens original material type was some formal than spherical lens. We thought that these pattern was significantly altered with spherical lens by prohibited transmitter oxygen from atmosphere therefore the epithelium shape was changed. This suggested wearing the aspherical lens might be less physiologic than shperical lens fitting.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.127-143
• /
• 2001

This thesis looks into the characteristics and compares the clothing styles between the Three Kingdom to the Unified Shilla era. The purpose of this study is to see what common themes exists between the foundation of Korean clothing and how it has evolved and through see to what extent the Chinese influence has been to Korean clothing culture. Also by explaining the originality and creativity of Korean clothing, we will be able to make clear the status of Korean culture. These findings include the following; 1. The Korean strait line Gik-ryong Kyo-im can also be found at the Gochang region in the west. 2. The Ban-ryong-ui, worn by the aristocrats of the Three kingdom and Unified Shilla era, began to appear from the nobles from the Nam-Buk cho(South-north era). This combined with a Bokdu(headwear) became a part of casual dress wear. 3. Go(pants) became a traditional part of clothing for Unified Shilla and the west. 4. Ban-bi and Bae-dang, all forms of Bansu-ui ( short sleeve), came from Chinas Kucha and Hotan and came to Korea. 5. Chinas Pae-baek and Pae-za (Shawl) which is the same as Unified Shillas Peo was also to be found to have come from the west. 6. The way a different color line was added to clothing both can be found in Korean and western clothing. Similarities to material used are; First, expensive wool was used and mostly originated from the west. From far away Rome came the O-saek-gae (Five-color wool). Secondly, Kong-gak me (peacock feather) and Bi-chi mo were all originated from the west. Third, Sil-sil is stated in the Sam-kuk Sa-ki (Three Kingdom records) as being prohibited to be worn by Jin-gol women (Highest nobility during Shilla era) as headwear or comb (pin) or as a comb(pin) for yuk-doo poom ( 6th class nobility) women. Suggesting that it existed and other sources tell us that it came from Tashkent region of Russia and was a jewelry of some sort. From what we have seen above, we can see the similarities between Korean and western clothing cultures and that these interactions not only occurred with China but with many other nations. We can see that our ancestors were creative and original that when importing foreign cultures that they transformed them into a Korean style. That these foreign cultures were transformed into our own style is good evidence to these facts.

• Korean journal of food and cookery science
• /
• v.24 no.3
• /
• pp.312-324
• /
• 2008

In this study, we investigated the names and various types of "kwa-jung" along with their recipes and ingredients occurring in Korean cookbooks published before the 17th century. The kwa-jungs were classified into 7 groups including Yoomilkwa, Yookwa, Dasik, Junkwa, Kwapyun, Yutganjung and Dang. A total of 72 kinds of kwa-jung were found. 26 kinds of Yoomilkwa, 18 kinds of Yookwa, 7 kinds of Dasik, 10 kinds of Junkwa, 1 kind of Kwapyun, 3 kinds of Yutganjung and 8 kinds of Dang. Among the types of Yoomilkwa, Yackwa was recognized as the best food according to the references. Also the cooking methods for items had a tendency to become simpler as society became modernized. Original and rare Ingredients were often substituted with other items that could be found more easily where people lived As recorded, the Yookwa group included kangyung, sanja, and bingsakwa. And as society became modernized, people tended to buy Yookwa in the store rather than making it at home due to its complicated and often difficult cooking process. The Dasik items were a kneaded mixture of flour, or the flour of chestnuts, with honey. These were formed into various patterns like birds, animals, butterflies, tree leaves and flowers, or as ki-wha by using printing cooking utensils Honey was used as a sweetener and as a combining material. The Junkwa consisted of roots or fruits that could be easily obtained these cooked or raw foodstuffs were then mixed with sugar and simmered. The Kwapyun used sour fruit juices as a main ingredient. These were then combined with sugar and simmered and allowed to harden. Then they were cut into square shapes after cooling. Yutkangjung was a mixture of yut, chochung, honey or syrup and pine nuts. which was combined over low heat. After mixing and stirring it was cut into square shapes. Finally, the Yut was typically cooked with grains and powdered malt and stirred until thickened.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.153-161
• /
• 2010

Numerous past studies have shown that safety and serviceability of many concrete infrastructures and buildings built in 1970's have far less strength capacities than their original intended design capacities, thereby requiring repair and strengthening. Currently, aged concrete structures are being repaired using various methods developed in the past. Unfortunately, these methods do not consider the specific conditions that these members are under, but they merely attach repairing materials on the external surface for random strength improvements. Therefore, in order to improve repair and strengthening methods by considering composite behavior between repairing material and structural member, enhanced construction methodologies are needed. Also, the enhanced repairing and strengthening methods must be able to be implemented on structural members constructed using high performance concrete to meet the present construction demand of building mammoth structures. Therefore, in this study, a repairing and strengthening method for retrofitting high strength concrete (HSC) columns that can effectively improve column performance is developed. A square HSC column's cross-sectional shape is converted to an octagonal shape by attaching precast members on the surface of the column. Then, the octagonal column surface is surface wrapped using Carbon Fiber Sheets (CFS). The method allows maximum usage of confinement effect from externally jacketing CFS to improve strength and ductility of repaired HSC columns. The research results are discussed in detail.