• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.71-79
• /
• 1997

This paper introduces a methodology of the precise control of a mobile/task robot using visual information captured bythe camera attached at the hand of the task robot. The major problem residing in the precise control of mobile/task robot is providing an accurate and stable base for the task robot through the precise control of mobile robot. On account of uncertainties on the surface, the precise control of mobile robot is not feasible without using external position sensor. In this paper, the methodology for the precise control of mobile robot is proposed, which recognizes the position of mobile robot using the camera attached at the hand of the task robot. While the task robot is approaching to an assembly part, the position of mobile robot is measured using the line correspondence between the image capturesd by the camera and the real assembly part, and using the kinematic transformation from the hand of the task robot to the mobile robot. To verify the solidness of this method, experimental data for the measurement of camera position/orientation and for the precise control of mobile robot using measurement are shown.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.37-40
• /
• 2008

The purpose of this paper is to extract DEMs from Spot-3 strips using orbit modeling technique. Spot-3 stereo strip images along 420km in distance were used for experiments. The orbit modeling technique has been suggested to establish accurate geometric models for a whole strip taken on the same orbit using only a small number of GCPs on the top area of the strip. This method enables extraction of orientation parameters of the scene along the strip that is needed to generate DEMs. Consequently, we were able to extract DEMs over the areas without accurate GCPs obtained by GPS surveying per each scene. Assessment of accuracy was carried out using USGS DTED. DEMs generated from the orbit modelling technique suggested showed satisfactory performance when quantitative analysis of accuracy assessment was carried out.

• 로봇학회논문지
• /
• 제4권3호
• /
• pp.169-176
• /
• 2009

Low-cost sensors have been widely used for mobile robot navigation in recent years. However, navigation performance based on low-cost sensors is not good enough to be practically used. Among many navigation techniques, building of an accurate map is a fundamental task for service robots, and mapping with low-cost IR sensors was investigated in this research. The robot's orientation uncertainty was considered for mapping by modifying the Bayesian update formula. Then, the data association scheme was investigated to improve the quality of a built map when the robot's pose uncertainty was large. Six low-cost IR sensors mounted on the robot could not give rich data enough to align the range data by the scan matching method, so a new sample-based method was proposed for data association. The real experiments indicated that the mapping method proposed in this research was able to generate a useful map for navigation.

• 센서학회지
• /
• 제16권4호
• /
• pp.301-306
• /
• 2007

AlN thin film for SAW filter application was deposited on (100) silicon wafers by reactive magnetron sputtering method. The structural characteristics were dependent on the deposition conditions such as sputtering pressure, RF power, substrate temperature, and nitrogen partial pressure. Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Electron Probe MicroAnalyzer (EPMA) and Atomic Force Microscope (AFM) have been used to find out structural properties and preferred orientation of AlN thin films. Insertion loss of SAW devices was 28.51 dB and out of band rejection was about 24 dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.905-908
• /
• 1988

In recent, Kalman filter technique has been much used as one of technique for tracking of the moving target. But some problem are still remained to be resolved. For example, when Kalman filter technique is applied to nonlinear system, the technique is nonoptimal estimator. Therefore, extended Kalman filter is proposed to reduce modeling error for nonlinear system. In this study, an extended Kalman filter in Cartesian coordinates is described for moving target, when the radar sensor measures range, azimuth and elevation angle in polar coordinates. And an approximate gain computation algorithm is proposed. In this approach, Kalman gains are computed for three uncoupled filter and multiplied by a Jacobian transformation determined from the measured target position and orientation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2015-2017
• /
• 1998

This paper deals with the design of a field oriented control system model for the high performance induction motor using Matlab with Simulink. The proposed control system model, which is not used the speed and flux sensor, contains IM model, Tranformation, Decoupling, FFOC(Field Flux Orientation Controller), Torque calculator and PI Controller to control speed, torque. Results present the stator and rotor flux phasor trajectory, the startup and transient response of speed, torque and stator current with field oriented control and the response to changes in reference speed with no load. This paper shows that the propose control system is more robust than other vector control system, and suggest the enchanced model, using Matlab with Simulink for the high performance in induction motor control.

• 공학논문집
• /
• 제2권1호
• /
• pp.63-71
• /
• 1997

본 논문에서는 range 데이터로부터 평면, 또는 곡면을 갖는 물체의 표면을 인식하여 matching시키는 단순하고 효율적인 방법을 제안한다. 물체의 해당 면을 인식하기 위해 단순히 물체의 면을 나타내는 고유 값만을 비교하기 때문에 인식에 따르는 불필요한 절차를 줄일 수 있다. 여기서, 사용되는 물체의 면을 나타내는 고유값(SRV)은 그 물체의 view-point에 독립적인 특징들에 대하여 가중치를 부여한 값들의 합으로 얻어진다. 따라서, 이 방법은 단순하고 효율적이며 센서에 얻어진 데이터의 잡음과 occlusion에 덜 민감하다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제45차 동계학술발표논문집 20권1호
• /
• pp.7-10
• /
• 2012

본 논문에서는 스마트폰을 이용하여 도로 주행 정보를 기록하고 운전자에게 패턴 별 주행정보를 제공하는 라이프로그(Lifelog) 형태의 서비스에 목적을 두고 있다. 운전자의 도로 주행 데이터를 데이터베이스화한 이 정보는 다양하게 이용될 수 있다. 주행 패턴 인식은 이벤트 구간 검출 과정을 통한 패턴 구간을 검출하고 가속도 센서와 방향 센서, 즉 멀티 센서 기반으로 주행패턴을 인식한다. 주행 패턴을 분석 후 시간 정보를 이용하여 촬영된 영상 데이터에서의 패턴 구간 영상을 같이 제공한다. 이렇게 패턴 구간의 센서 스트리밍 정보와 영상을 제공하면 운전자의 운전 성향 및 주행 기록을 분석하는데 이용될 수 있다. 따라서 주행패턴 인식 알고리즘을 프로토타입으로 제안한다.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.113-120
• /
• 2016

The necessity of maritime sector for continuous management, accurate and update location information such as seabed shape and location, research on airborne LiDAR bathymetry surveying techniques are accelerating. Airborne LiDAR systems consist of a scanner and GPS/INS. The location accuracy of 3D point data obtained by a LiDAR system is determined by external orientation parameters. However, there are problems in the synchronization between sensors should be performed due to a variety of sensor combinations and arrangement. To solve this issue, system calibration should be conducted. Therefore, this study evaluates the system verification methods, processes, and operation techniques.

• International Journal of Control, Automation, and Systems
• /
• 제4권5호
• /
• pp.615-623
• /
• 2006

The gyroscope free strap-down INS is composed only of accelerometers. Any gyroscope free INS navigation error is deeply affected by the accuracy of the sensor bias, scale factor, orientation and location error. However these parameters can be found by calibration. There is an important research issue about a multi-position calibration method in this paper. It provides a novel method to find the error parameters for the six-accelerometer INS. A superior simulation is shown that the multi-position calibration can find the specifications of a six-accelerometer INS in laboratory. From these parameters the six-accelerometer INS could apply in realistic navigation.