• 한국환경과학회지
• /
• 제8권1호
• /
• pp.61-67
• /
• 1999

Silicone oil has organic and inorganic properties, and its skeleton is polysiloxane bonding that silicon is bonded hydrogen or organic group. Silicone compounds are very smooth and lubricant properties by low surface tension, low temperature dependence, and nonadhesive properties. Because of these properties, silicone compounds are used as many parts of chemicals, softener, smooth and libricant agents, water-repellent agent, and defoaming agent, etc. Emulsion was prepared with the inversion emulsification method which adopted the agent-in-oil method dissolving the polyoxyethylene(7) tridecyl ether(HLB 12.2) into methoxy terminated poly(dimethyl-co-methyl amino) siloxane and hydroxy terminated poly(dimethyl-co-methyl amino) siloxane in water. At this time, processed emulsion was almost microemulsion. When ratio of emulsifier increases, emulsion is stable bacuause microemulsion is solubilized by emulsion drop size and zeta-potential are decreased. But, when amount of electrolyte is increase, emulsion became unstable because emulsion drop size is increased.

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.118-130
• /
• 2011

In this study, hydrophilic polyurethane (PU) was synthesized by one shot process to get good non-swelling effect and to keep high breathability using reactive silicone oil of mono terminal and bi-terminal types. We also blended non reactive silicone oil with pure hydrophilic PU to compare non-swelling effect and breathability with hydrophilic PU synthesized by the two types of reactive silicone oils. The hydrophilic films were analyzed by nuclear magnetic resonance (NMR) spectroscopy, scanning electron microscope (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray photo electron (XPS) spectroscopy, energy dispersive spectrometry (EDS), breathability, waterproofness, tensile strength, contact angle and swelling effect. The results showed that the film made by hydrophilic PU which was synthesized with mono terminal type silicone oil provided good non-swelling effect and acceptable moisture permeability due to the modified surface properties.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.864-869
• /
• 2013

As the size of mechanical components decreases, capillary forces and surface tension become increasingly significant. A major problem in maintaining high reliability of these small components is that of large frictional forces due to capillary action and surface tension. Unlike the situation with macro-scale systems, liquid lubrication cannot be used to reduce friction of micro-scale components because of the excessive capillary and drag forces. In this work, the feasibility of using evaporation to coat a thin film of organic lubricant on a solid surface was investigated with the aim of reducing friction. Petroleum and silicone oils were used as lubricants to coat a silicon substrate. It was found that friction could be significantly reduced and, furthermore, that the effectiveness of this method was strongly dependent on the coating conditions.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.623-627
• /
• 2014

에멀젼은 섞이지 않은 두 물질을 분산시스템으로 혼합시켜 놓은 것이다. 에멀젼의 점도에 영향을 미치는 인자는 유화입자 크기, 연속상 및 분산상 종류, 연속상과 분산상의 비, 유화제 종류 및 유화기기 등 다양한 요소들이 있다. 본 연구에서는 오일 극성도에 따라 에멀젼의 점도 변화를 관찰하였고 이를 유기개념도를 이용하여 해석하였다. 탄화수소계, 에스테르계 및 실리콘계 오일을 사용하여 에멀젼을 제조하여 점도를 측정하였다. 오일 극성도가 높을수록 계면에 위치하는 유화제 및 유화안정제의 양이 적어지기 때문에 점도는 감소하였다. 극성 오일간 극성도를 수치적으로 비교하기 위해 유기개념도 이용하였으며 유기개념도상의 해석과 에멀젼의 점도 측정 결과가 실리콘 오일을 제외하고는 모두 일치하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.731-735
• /
• 2008

The fluid ensemble in the liquid lens, which is composed of electrolyte and silicone oil, is the key material system to vary the focal length processing of the electrochemical desorption. In order to characterize the capability of the liquid lens according to response time and optical range, we prepared a fluid ensemble comprising the electrolyte and oil. To elucidate the physical mechanism of the effective response time, we examined the viscosity dependency while satisfying the requirements for the density and refractive index of the electrolyte and oil, respectively. The characterization results indicated that the response time (up and down) is influenced by the viscosity of the electrolyte and oil. On this basis, we prepared a fluid ensemble capable of reversibly adjusting for the focal length of the liquid lens, as well as the response time. The ensemble is applicable to various systems such as micro-lens and optical sensors.

• 전기학회논문지
• /
• 제64권11호
• /
• pp.1592-1597
• /
• 2015

In this study, we developed a fiber-optic temperature sensor (FOTS) based on a silicone oil and an optical time domain reflectometer (OTDR) to apply the measurement of a coolant leakage in the nuclear power plant. The sensing probe of the FOTS consists of a silicone oil, a stainless steel cap, a FC terminator, and a single mode optical fiber. Fresnel reflection arising at the interface between the silicone oil and the single mode optical fiber in the sensing probe is changed by varying the refractive index of the silicone oil according to the temperature. Therefore, we measured the optical power of the light signals reflected from the sensing probe. The measurable temperature range of the FOTS using a Cu-coated silica fiber is from $70^{\circ}C$ to $340^{\circ}C$ and the maximum operation temperature of the FOTS is sufficient for usage at the secondary system in the nuclear power plant.

• Tribology and Lubricants
• /
• 제25권3호
• /
• pp.176-181
• /
• 2009

Aminated polyacrylonitrile as the new organic disperse phases of the anhydrous ER fluid has been synthesized and ER effect of the suspension composed of aminated polyacrylonitrile in silicone oil investigated. The suspension showed a typical ER response (Bingham flow behavior) upon application of an electric field. The shear stress for the suspension exhibited the dependence with a factor equals to 1.6 power on theelectric field. The current density and the conductivity of the of aminated polyacrylonitrile suspension increase with the electric field intensity and moreover the conductivity of the suspension is about 8 order of magnitude higher than that of the silicone oil. On the basis of the the results, aminated polyacrylonitrile suspension showed the ER flow behavior upon application of the electric field due to the polarizability of the branched amine polar group of the aminated polyacrylonitrile particles.

• 보존과학회지
• /
• 제37권2호
• /
• pp.101-119
• /
• 2021

국보 제229호 창경궁 자격루 누기는 조선시대 과학기술의 정점을 보여주는 과학 문화재로서, 현재는 대·중·소 파수호(播水壺)와 수수호(受水壺)만 남아있다. 2018년부터 약 2년 여간 이루어진 자격루 누기의 전면적인 보존처리 과정에서, 표면에 발생한 오염물을 동정하고 이를 제거하기 위한 실험을 실시하였다. 표면 오염물은 이전 보존처리와 조사 과정에서 사용된 스쿠알란(squalane)과 실리콘 오일(silicone oil)이 환경 요인에 노출되어 발생한 오염물로 확인되었다. 이에 따라 우선적으로 고려할 사항을 설정하여 실험을 진행하였으며, 이를 통해 오염물을 효과적으로 제거할 수 있는 방법을 알아보았다. 우선 유기용제와 습포제를 이용한 실험에서는 톨루엔과 벤토나이트를 적용했을 때 가장 큰 색차 변화폭(𝚫E)을 나타내는 등 뛰어난 반응성이 확인되었다. 그러나 이에 수반되는 유기용제의 유해성과 습포제로 인한 2차 오염 발생 가능성 또한 확인할 수 있었다. 한편 보존처리자의 안전과 작업 환경 및 작업 용이성을 우선적으로 고려한 실험에서는 유기용제에 비해 반응성이 미비하고 비교적 많은 시간과 인력이 요구되었으나, 회차가 거듭될수록 색차 변화폭(𝚫E)의 정도가 유기용제 실험 결과와 동일한 범주 내까지 도달하는 것을 확인하였다. 특히 계면활성제를 활용한 방법이 오염물 제거에 가장 효과적인 것으로 확인되었다.

• 대한화장품학회지
• /
• 제47권4호
• /
• pp.273-280
• /
• 2021

자외선차단 제형은 내수성이 중요하므로 수상이 유상에 분산되는 water-in-oil (W/O) 에멀젼으로 만드는 것이 바람직하다. 이 경우에는 오일 특유의 무겁고 끈적이는 사용감 때문에 이를 보완하는 방법으로 실리콘계 오일을 사용한다. 이러한 오일은 유기 자외선차단제와의 상용성이 낮아 에멀젼의 안정성에 문제가 되고 있다. 본 연구에서는 자외선차단 제형의 W/O 에멀젼에서 다양한 오일들 간의 상용성을 Hansen solubility parameter(HSP)를 이용하여 수치적으로 도출하였다. HSP는 물질의 분산, 극성 및 수소 결합을 나타내는 지표로 물질간의 상용성을 판단하는데 유용하다. 본 연구에서는 HSP가 다른 다양한 오일을 선정하여 W/O 에멀젼을 제조하고 제형의 시간에 따른 점도 변화 및 안정성을 조사하여 HSP 수치와의 상관관계 또는 일치성을 고찰하였다. HSP를 이용하면 상용성이 높은 오일 선택을 용이하게 할 수 있었다. 또한, W/O 에멀젼에서 유상의 상용성이 높으면 점도의 경시변화가 작았으며 freeze-thaw cycle (-15 ℃ ~ 45 ℃) 조건에서 안정성이 향상된 것을 확인하였다. 향후 HSP를 통해 성분 구성을 최적화한다면 사용감이 우수하면서 안정성을 확보한 W/O형 자외선차단 제형 개발에 도움이 될 것이라 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.85-89
• /
• 1993

Silicone oil exhibits the properies of both organic and inorganic substances and, thus, it has many superior properties such as higher thermal resistance and lower thermal oxidation level when compared to other dielectric liquids. In order to investigate the dielectric characteristics, dielectric liquids of viscosity 1 [cSt] is chosen as the specimen and experiment is performed in the temperature range of 20∼65 [$^{\circ}C$] and frequency range of 30∼1${\times}$10$\^$6/ [Hz] respectively. As a result, the observed linear decrease in dissipation factor at the frequency range below 3 [kHz] is due to the influence of frequency, whereas the increase in dissipation factor at higher frequency range is contributed by electrode's resistance. At a fixed frequency of 30 [kHz], increasing temperature results in higher peak value and wide width of the absorption curve. This is due to the increase in dipole and viscosity. As temperature increases, dipole moment is decreased from 0.98 to 0.64 [debye]. The activation energy which causes the relaxation and loss of dielectric is obtained about 15 [kcal/mole].