• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.210-219
• /
• 1999

The fundamental dispersion property of Si2N4 and a combination of AlN and Nd2O3 as sintering additives in a variety of organic solvents such as alcohols, hydrocarbons, ketones, and ethers was investigated. The stabilization mechanism and interaction between organic functional groups of the various organic additives were studied to clarify the dispersibility of the ceramic particles in the nonaqueous suspending medium. characterization of the suspensions was based mainly on electrokinetic sonic amplitude(ESA) measurements and the flow curves obtained from the rheological studies as well as estimated Hamaker constants. It was found that the contribution of electrostatic repulsive forces to the Si3N4, AlN and Nd2O3 stabilization in organic media is appreciably greater than anticipated and is dependent on the physicochemical properties of organic solvents.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.646-650
• /
• 2009

We report the fabrication of pentacene organic field-effect transistors (OFETs) using a fluorinated styrene-alt-maleic anhydride copolymer gate dielectric, which was prepared from styrene derivatives with a fluorinated side chain [$-CH_2-O-(CH_2)_2-(CF_2)_5CF_3$] and maleic anhydride through a solution polymerization technique. The fluorinated side chain was used to impart hydrophobicity to the surface of the gate dielectric and maleic anhydride was employed to improve its wetting properties. A field-effect mobility of 0.12 cm$^2$/Vs was obtained from the as-prepared top-contact pentacene FETs. Since various functional groups can be introduced into the copolymer due to the nature of maleic anhydride, its physical properties can be manipulated easily. Using this type of copolymer, the performance of organic FETs can be enhanced through optimization of the interfacial properties between the gate dielectric and organic semiconductor.

• Proceedings of the Korean Biophysical Society Conference
• /
• 1996.07a
• /
• pp.23-23
• /
• 1996

A working molecular model of the angiotensin II type 1 receptor is built based on the seven transmembrane helix structure of the recently refined bacteriorhodopsin atomic coordinates. A multiple copy simultaneous search (MCSS) method is used to search the pharmacophore of angiotensin on the surface of the receptor. Multiple copies of amino acid fragments and organic functional groups are scattered around the possible binding site and the time dependent. (omitted)

• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.925-932
• /
• 2008

Manufactures of automotive repair finishes are tending to reduce more and more the level of volatile organic compounds (VOCs) in their paint processes in order to comply with increasingly strict environmental legislation. The production of high solids paints is a way to solve this problem. However, the application of high-solids paints is limited primarily by the viscosity of resin which is strongly related to painting ability: the higher solid content, the lower desired property. In this study, alkyl copolymer with low viscosity was synthesized by the introduction of the monomers with long-side chains and functional groups which improve flexibility and cross-linking density, respectively. The solid content of the paint prepared with the synthesized resin was 80wt% and its VOCs was reduced by 20%, compared to the commercialized paint. Also, the physical and mechanical properties of coatings on steel sheets were similar to commercialized one.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.21 no.1
• /
• pp.17-21
• /
• 2010

Dysphonia is a medical terminology for voice disorders characterized by hoarseness, harshness, weakness, or even loss of voice ; any impairment in ability to produce voice sounds using the vocal organs, larynx, The causes of dysphonia can be classified into two groups, organic and functional. Functional dysphonia includes spasmodic dysphonia, muscle tension dysphonia, mutational dysphonia and conversion dysphonia, etc, The findings of laryngoscopy in these dysphonia are almost normal. Therefore, physicians should diagnosis these diseases from careful history taking and abundant understandings about the phonation pattern, Organic dysphonia is caused by anatomical problems in the larynx, especially on the vocal fold, Some lesions, however, are not easily found because these lesions are too small, or located on the lower lip of vibrating vocal fold. Laryngopharyngeal reflux induced laryngitis, vascular lesions, sulcus vocalis, vocal atropy including presbylaryngis, and mucosal tears are common lesions easily missed in laryngoscopy, Therefore, a high index of suspicion is necessary to avoid missing vocal fold mucosal lesions, and the strobovideolaryngoscopy is indispensable in making the diagnosis,

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.1
• /
• pp.9-13
• /
• 2002

In this work, the surface of inorganic fillers were modified with some functional groups such as stearic acid, aliphatic long chain, vinylsilane and aminosilane to control the interaction between inorganic fillers and polymer matrix. Ethylene-vinyl acetate copolymers (EVA) with various amount of vinyl-acetate and copolyether-ester elastomer were used as polymer matrix. The addition of inorganic fillers increases flame retardancy, but results in steep drop of electrical and mechanical properties, which may be caused by the defects in the interface between organic/inorganic hybrid composites. The hybrid composites are found to show better mechanical properties and higher volume resistivities as inorganic fillers are well dispersed and have good adhesion with polymer matrix. Also, the most effective type of functional group coated on fillers depends on the chemical structure of polymer.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.75-80
• /
• 1989

The approximate rates and stoichiometry of the reaction of excess potassium 9-sec-amyl-9-boratabicylco[3.3.1]nonane (K 9-sec-Am-9-BBNH) with selected organic compounds containing representative functional goups under standardized conditions (tetrahydrofuran, $0^{\circ}C)$ were examined in order to explore the reducing characteristics of the reagent for selective reductions. The reagent readily reduces aldehydes, ketones, acid chlorides and epoxides to the corresponding alcohols. However, carboxylic acid, aliphatic nitriles, t-amides, and some sulfur compounds show very little reactivity or no reactivity to this reagent. The most interesting feature of the reagent is that aromatic nitriles are reduced moderately to the corresponding aldehyde stage, wheras aliphatic nitriles are inert. In addition, the reagent shows a high stereoselectivity toward cyclic ketones at $0^{\circ}C$ and - $25^{\circ}C.$ The selectivity exhibited at $0^{\circ}C$ is comparable to that by lithium trisiamylborohydride at that temperature.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.29-29
• /
• 2012

Rhodamine chromophore/fluorophore have been attracted to many researchers due to its excellent photophysical properties. In this study, we have designed and synthesized a strong emissive fluorescent dye chemosensor for toxic elements. A rhodamine-based sensor was prepared by incorporation the rhodamine fluorophore and several functional host groups with high affinity to hazardous metal and anion. This sensor shows a high selectivity and an excellent sensitivity and is a dual-responsive colorimetric and fluorescent metal/anion-specific sensor. In addition, the 1:1 binding mode was proposed based on Job's plot method. Finally, computational calculation was simulated and calculated to approach for HOMO/LUMO of this dye chemosensor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.10
• /
• pp.665-671
• /
• 2017

Herein, we report the fabrication of low-voltage N-type organic field-effect transistors by using high capacitance fluorinated polymer gate dielectrics such as P(VDF-TrFE), P(VDF-TrFE-CTFE), and P(VDF-TrFE-CFE). Electron-withdrawing functional groups in PVDF-based polymers typically cause the depletion of negative charge carriers and a high contact resistance in N-channel organic semiconductors. Therefore, we incorporated intermediate layers of a low-k polymerto prevent the formation of a direct interface between PVDF-based gate insulators and the semiconducting active layer. Consequently, electron depletion is inhibited, and the high charge resistance between the semiconductor and source/drain electrodes is remarkably improved by the in corporation of solution-processed charge injection layers.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.133-144
• /
• 2022

Fast-paced industrial and agricultural development generates large quantities of hazardous heavy metals (HMs), which are extremely damaging to individuals and the environment. Research in both academia and industry has been spurred by the need for HMs to be removed from water bodies. Advanced materials are being developed to replace existing water purification technologies or to introduce cutting-edge solutions that solve challenges such as cost efficacy, easy production, diverse metal removal, and regenerability. Water treatment industries are increasingly interested in activated carbon because of its high adsorption capacity for HMs adsorption. Furthermore, because of its huge surface area, abundant functional groups on surface, and optimal pore diameter, the modified activated carbon has the potential to be used as an efficient adsorbent. Metal-organic frameworks (MOFs), a novel organic-inorganic hybrid porous materials, sparked an interest in the elimination of HMs via adsorption. This is due to the their highly porous nature, large surface area, abundance of exposed adsorptive sites, and post-synthetic modification (PSM) ability. This review introduces PSM methods for MOFs, chemical modification of activated carbons (ACs), and current advancements in the elimination of Pb²⁺, Hg²⁺, and Cd²⁺ ions from water using modified MOFs and ACs via adsorption.