• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.24-37
• /
• 2007

The Korean Ministry of Environment started controlling indoor air quality (IAQ) in 2004 through the introduction of a law regulating the use of pollutant emitting building materials. The use of materials with formaldehyde emission levels above $1.25 mg/m^2{\cdot}h$ (JIS A 1901, small chamber method) has been prohibited. This level is equivalent to the $E_2$ grade ($>5.0mg/{\ell}$) of the desiccator method (JIS A 1460). However, the $20{\ell}$ small chamber method requires a 7-day test time to obtain the formaldehyde and volatile organic compound (VOC) emission results from solid building interior materials. As a approach to significantly reduce the test time, the field and laboratory emission cell (FLEC) has been proposed in Europe with a total test time less than one hour. This paper assesses the reproducibility of testing formaldehyde and TVOC emissions from wood-based composites such as medium density fiberboard (MDF), laminate flooring, and engineered flooring using three methods: desiccator, perforator and FLEC. According to the desiccator and perforator standards, the formaldehyde emission level of each flooring was ${\le}E_1$ grade. The formaldehyde emission of MDF was $3.48 mg/{\ell}$ by the desiccator method and 8.57 g/100 g by the perforator method. To determine the formaldehyde emission, the peak areas of each wood-based composite were calculated from aldehyde chromatograms obtained using the FLEC method. Formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde and benzaldehyde were detected as aldehyde compounds. The experimental results indicated that MDF emitted chloroform, benzene, trichloroethylene, toluene, ethylbenzene, m,p-xy-lene, styrene, and o-xylene. MDF emitted significantly greater amounts of VOCs than the floorings did.

• 멤브레인
• /
• 제26권1호
• /
• pp.55-61
• /
• 2016

저압 침지식 멤브레인을 이용한 해수 담수화 전처리에 있어서 유기 파울링은 막간 압력 증가로 인한 화학 세정 횟수의 증가 및 에너지 소비 증가 등 멤브레인 운전시 문제점들을 야기한다. 조류대응 해수전처리에서 조류가 배출하는 extracellular polymeric substances의 대표물질인 sodium alginate를 이용하여 침지식 여과에서 파울링 현상을 관찰하였다. 공기 폭기가 적용되지 않은 경우 순수한 aglinate 파울링은 농도가 증가하면서 증가하였다. 그러나 공기 폭기를 적용해 준 경우 alginate 파울링 감소는 매우 효과적이었다. 공기 폭기가 없는 경우 칼슘 농도의 증가에 따라 alginate 파울링은 감소하였다. 동일 조건에서 공기 폭기 시 높은 alginate 파울링 감소효과를 나타내었으나 NaCl 농도를 증가시킨 경우 칼슘 농도의 증가에 따라 파울링 제어를 위한 공기 폭기 효과는 감소하였다. 해수와 유사한 높은 NaCl과 칼슘 농도에서 고농도 sodium alginate의 경우 공기 폭기량 증가를 통해 초기 파울링을 감소시킬 수 있었으나 시간의 경과에 따라 상대적으로 낮은 폭기량에서의 파울링 감소 효과와 큰 차이는 없었다.

• 대한화학회지
• /
• 제9권1호
• /
• pp.61-65
• /
• 1965

有機클로로酸, 또는 에스타와 各種金屬(亞鉛, 硅素, 마그네슘, 錫)과의 여러 溶媒存在下(아세트나이트라일, 디옥센 및 토루엔)의 反應에서 얻은 反應生成物, 또는 反應系中의 金屬分布狀態를 (n,${\gamma}$)反應으로 製造한 各種放射性 金屬트레이서를 使用하여 決定하였다. 有機클로로 金屬 콤푸렉스의 溶解度는 親水性溶媒에서는 顯著하게 增加하였으며, 無極性溶媒에는 減少하였다. 이 事實은 回收된 金屬, 또는 回收된 金屬混合物의 水洗液中의 金屬分布狀態의 增加로서 確認되었다. 카보닐化合物 存在下에서 反應시켰 때에도 같은 事實을 나타내었다. 親水性溶媒中의 金屬콤푸렉스의 溶解度는 亞鉛, 硅素, 錫 및 마그네슘이 順序로 減少되었으며 無極性溶媒下에서는 硅素, 錫, 마그네슘 및 亞鉛의 順으로 減少되었다. 有機할로겐化合物과 金屬과의 反應生成物로 普通 豫期되는 有機金屬化合物은 全反應을 通하여 거의 없었다. 反應結果를 論議하였으며, 本反應過程에서 觀察한 溶媒의 影響에 關하여 論及하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권3호
• /
• pp.827-830
• /
• 2013

Investigation of an organic extract of the fruits Schisandra wilsoniana led to the isolation of two new highly oxygenated nortriterpenoids, named schilancidilactones V-W (1-2). Their structures were elucidated by spectroscopic evidence. Compounds 1-2 feature a double bond between C-7 and C-8 compared with related known nortriterpenoids isolated from the genus Schisandra. Compounds 1 and 2 were tested for their anti-HIV-1 activities and cytotoxicity. The results revealed that compounds 1 and 2 showed moderate anti-HIV-1 activities with $EC_{50}$ 3.05 and 2.87 ${\mu}g/mL$, respectively, and compound 1 showed high cytotoxicity against KB and MDA-MB-231 cell with $IC_{50}$ values of 3.18 and 5.22 ${\mu}M$, respectively.

• 아시안잔디학회지
• /
• 제6권2호
• /
• pp.83-88
• /
• 1992

Peat 및 화학 비료시용에 따른 잔디식물의 생장반응에 대한 실험 결과를 요약하면 다음과 같다. 1. 금잔디 생장반응 효과는 peat와 복합비료를 혼용했을 때 무처리 또는 peat나 복합비료의 단용시 보다 지상부와 지하부의 생장이 지속적으로 현저하게 증가되었다. 2. 줄기의 수는 무비상태보다 peat의 시용량이 증가함에 따라 많아졌으며 peat 3,000kg과 복합비료 혼용구에서 2배 이상 증가하였다. 3. 시험 후의 토양성분 변화는 peat 시용량이 증가할수록 대조구에 비해 pH와 유기물 함량이 높아지는 경향을 보였다. 4. 토양 중 Ca과 Mg의 함량은 대조구에 비해 peat의 시용량이 증가할 수록 높아지는 경향을 보였지만, Na의 함량은 peat시용량에 따라 큰 차이를 보이지 않았다.

• 한국환경보건학회지
• /
• 제35권2호
• /
• pp.124-129
• /
• 2009

The photocatalysis degradation of simazine, s-triazine type herbicide was carried out using circulating photo reactor systems. In order to search for the effective method to mineralize this compound into environmentally compatible products, this study compared the removal efficiencies of simazine by changing various parameters. First, under the photocatalytic condition, simazine was more effectively degraded than by photolysis and $TiO_2$ only condition. With photocatalysis, 5 mg/l simazine was degraded to approximately 90% within 30 min, and completely degraded after 150 min. Ionic byproducts such as ${NO_2}^-$, ${NO_3}^-$, and $Cl^-$ were detected from the photocatalysis of simazine, however, the recoveries were poor, indicating the presence of organic intermediates rather than the mineralization of simazine during photocatalysis. Two bioassays using V. fischeri and D. magna were employed to measure the toxicity reduction in the reaction solutions treated by both photocatalysis and photolysis. Simazine and its photocatalysis treated water did not exert any significant toxicity to V. fischeri, marine bacterium. However, the acute toxicity test using D. magna indicates that initial acute toxicity ($EC_{50}$ = 57.30%) was completely reduced ($EC_{50}$ = 100%) after 150 min under both photocatalysis and photoysis of simazine. This results indicates that photocatalysis and photolysis of simazine reduced the acute toxicity through mineralization.

• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.227-237
• /
• 1998

HgCdTe Is the most versatile material for the developing infrared devices. Not like III-V compound semiconductors or silicon-based photo-detecting materials, HgCdTe has unique characteristics such as adjustable bandgap, very high electron mobility, and large difference between electron and hole mobilities. Many research groups have been interested in this material since early 70's, but mainly due to its thermodynamic difficulties for preparing materials, no single growth technique is appreciated as a standard growth technique in this research field. Solid state recrystallization(SSR), travelling heater method(THM), and Bridgman growth are major techniques used to grow bulk HgCdTe material. Materials with high quality and purity can be grown using these bulk growth techniques, however, due to the large separation between solidus and liquidus line on the phase diagram, it is very difficult to grow large materials with minimun defects. Various epitaxial growth techniques were adopted to get large area HgCdTe and among them liquid phase epitaxy(LPE), metal organic chemical vapor deposition(MOCVD), and molecular beam epitaxy(MBE) are most frequently used techniques. There are also various types of photo-detectors utilizing HgCdTe materials, and photovoltaic and photoconductive devices are most interested types of detectors up to these days. For the larger may detectors, photovoltaic devices have some advantages over power-requiring photoconductive devices. In this paper we reported the main results on the HgCdTe growing and characterization including LPE and MOCVD, device fabrication and its characteristics such as single element and linear array($8{\times}1$ PC, $128{\times}1$ PV and 4120{\times}1$ PC). Also we included the results of the dewar manufacturing, assembling, and optical and environmental test of the detectors.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.318-326
• /
• 1996

본 연구는 초고집적회로의 금속 배선으로써 보다 유용할 것으로 기대되는 구리박막의 화학적인 증착기술에 관한 것으로 precursor 물질로는 (hfac)Cu(I)VTMS ; (hevaflouoroacetylacetonate trimethyvinylsilane copper)로 명명된 금속 유기 물질을 사용하였다. 실험시스템의 초기 압력은 $10^{-6}$ Torr를 유지하고, 시스템의 챔버압력과 기판온도가 조정 가능하도록 설계, 제작되었다. 공정 조건에 따른 구리 박막 결정의 성장속도, Grain size, 전기적 성질을 측정하였다. 구리 박막을 증착하기 전에 W(tungsten) 또는 TiN(titanium nitride)이 증착되어 있는 실리콘 웨이퍼를 사용하였다. 본 연구에서는 $250^{\circ}C$이하의 상대적으로 낮은 실리콘 웨이퍼 온도에서의 실험이 가능하였으며 헬륨을 carrier gas로 사용하였는데 연구 결과 구리 박막 증착율이 $220^{\circ}C$에서 최대 $1,800\;{\AA}/분$으로 증가한 반면 표면 거칠기는 $200\;{\AA}$를 갖는 다결정 구리 박막을 관찰하게 되었다. 기판 온도가 $250^{\circ}C$이하일 때의 W(또는 TiN)과 $SiO_{2}$ 기판사이에서 구리 증착 선택성이 관찰되었으며, 최적의 기판 증착 온도는 약 $180^{\circ}C$와 반응용기 압력 0.8 Torr로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1780-1782
• /
• 2001

In this experiment, an attempt to use the sludge pellets as catalyst for NO removal from simulated gas is experimentally investigated by using $BaTiO_3$-sludge packed-bed reactor of plate-plate geometry. An experimental investigation has been conducted for NO concentration of 50[ppm] balanced with air, a gas flow rate of 5[1/min]. $BaTiO_3$ pellets are filled at upstream of reactor for corona discharge and sludge pellets are put at downstream of reactor for catalystic effect. The volume rate of sludge pellets to $BaTiO_3$ pellets is 50[%] and AC voltage to dischare the gases was supplied. In the result, when sludge pellets is seperated to $BaTiO_3$ by other reactor and AC voltage is supplied to $BaTiO_3$ and sludge pellets NO, $NO_2$ removal rate is higher. When gas temperature increase from room temperature to 100[$^{\circ}C$], NO removal is decreased while $NO_2$ concentration is independent on gas temperature. This result suggest that the removal mechanism of active oxyzen species and $NO_2$ in sludge is not absorption, but chemical reaction. Temperature of heating treatment is on sludge pellets increased, $NO_x$ removal rate is decrease. It is thought that organic compound is removed by heating treatment.

• The Journal of Korean Physical Therapy
• /
• 제13권3호
• /
• pp.509-527
• /
• 2001

The Sun's ray is composed of Infrared(49%), Visible light(40%) and Ultra violet(11%), however the ray getting to the earth is FIR(Far infrared; 60%), IR(Infrared; 20%), and UV(Ultra Violet; 20%). Human beings has utilized FIR already from time immemorial. Hershel found out Infrared for the first time. in the Industrial Revolution the Infrared and FIR had been begun to use making products. In these days, with contemporary science FIR would be begun to clear up the implication in the human body and organic compound. IR classified by wavelength three parts NlR, MIR, FIR. There is FIR which is radiated from healthy human body the wave length is 8-l4m. The human body is composed of proteins which get easily changed by a thermal factor (about 42 $^{\circ}$C over). FIR with low temperature can deeply penetrate on the human body composed things without troublesomes, since FIR has effectively operated on the human body at low temperature (35-40 $^{\circ}$C). When FlR penetrated on the human body. it would inhibit the abnormal genes and cells expression, and then information of DNA and RNA would be reexpressed for arranging DNA and RNA abnormal state. As FlR's receptors in the body, it could be presumed that N-glycosyl linkage of purine and deoxyribose, RNA splicing process, and Heat shock protein. To take the FIR which was a optimized wavewlength and strength, at first, we induced the characteristic algorithm and the computerized programing. Then we formed that the formular of optimized FIR with physical, mathematical logic and theory. especially, Plank, Kirchhoff, Wien, Stefan-Boltzmann's logic and law. In the long run, the formular was induced with integration mathematical, since we had to know the molecular wavelength. Based on the induced formular as above, we programmed the optimized FlR radiating computerized program. In this research, we designed the eletronic circuit f3r interfacing with human body to diagnosis and treatment with FIR sensor which radiated FIR wavelength optimized.