Application of Field and Laboratory Emission Cell (FLEC) to Determine Formaldehyde and VOCs Emissions from Wood-Based Composites

  • Kim, Sumin (Composite Materials and Structures Center, Department of Chemical Engineering and Materials Science, College of Engineering, Michigan State University) ;
  • Kim, Jin-A (Lab. of Adhesion & Bio-Composites, Program in Environmental Materials Science, Department of Forest Sciences, Seoul National University) ;
  • Kim, Hyun-Joong (Lab. of Adhesion & Bio-Composites, Program in Environmental Materials Science, Department of Forest Sciences, Seoul National University)
  • Received : 2007.03.19
  • Accepted : 2007.04.25
  • Published : 2007.09.25

Abstract

The Korean Ministry of Environment started controlling indoor air quality (IAQ) in 2004 through the introduction of a law regulating the use of pollutant emitting building materials. The use of materials with formaldehyde emission levels above $1.25 mg/m^2{\cdot}h$ (JIS A 1901, small chamber method) has been prohibited. This level is equivalent to the $E_2$ grade ($>5.0mg/{\ell}$) of the desiccator method (JIS A 1460). However, the $20{\ell}$ small chamber method requires a 7-day test time to obtain the formaldehyde and volatile organic compound (VOC) emission results from solid building interior materials. As a approach to significantly reduce the test time, the field and laboratory emission cell (FLEC) has been proposed in Europe with a total test time less than one hour. This paper assesses the reproducibility of testing formaldehyde and TVOC emissions from wood-based composites such as medium density fiberboard (MDF), laminate flooring, and engineered flooring using three methods: desiccator, perforator and FLEC. According to the desiccator and perforator standards, the formaldehyde emission level of each flooring was ${\le}E_1$ grade. The formaldehyde emission of MDF was $3.48 mg/{\ell}$ by the desiccator method and 8.57 g/100 g by the perforator method. To determine the formaldehyde emission, the peak areas of each wood-based composite were calculated from aldehyde chromatograms obtained using the FLEC method. Formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde and benzaldehyde were detected as aldehyde compounds. The experimental results indicated that MDF emitted chloroform, benzene, trichloroethylene, toluene, ethylbenzene, m,p-xy-lene, styrene, and o-xylene. MDF emitted significantly greater amounts of VOCs than the floorings did.

Keywords

References

  1. ASTM-D5116-97. 1997. Standard guide for smallscale environmental chamber determinations of organic emissions from indoor materials/products
  2. ASTM-D6007-96. 1996. Standard test method for determining formaldehyde concentrations in air from wood products using a small scale chamber
  3. Bornehag, C.-G. 1991. Indoor Climate in Dalen. Physical measurements in 90 flats at Ensskededalen, Stockholm, Byggforskningsrdet BFR, Stockholm
  4. Brown, S. K. 1999. Chamber assessment of formaldehyde and VOC emissions from woodbased panels. Indoor Air 9: 209-215 https://doi.org/10.1111/j.1600-0668.1999.t01-1-00008.x
  5. CEC-Commission of the European Communities, prENV 13419-2. 1998. Building products-determination of the emission of volatile organic compounds-Part 2: Emission test cell method, Brussels: European Committee for Standardization
  6. Cleno, J. G., P. A. Clausen, C. J. Weschler, and P. Wolkoff. 2001. Determination of ozone removal rates by selected building products using the FLEC emission cell. Environmental Science and Technology 35: 2548-2553 https://doi.org/10.1021/es000284n
  7. ECA-IAQ Report No.2. 1989. Guideline for the determination of steady state concentrations in test chambers, Luxembourg
  8. ECA-IAQ Report No.8. 1991. Guideline for the characterization of volatile organic compounds emitted from indoor materials and products using small test chambers, Brussels
  9. ECA-IAQ Report No.13. 1993. Determination of VOCs emitted from indoor materials and products Inter laboratory comparison of small chamber measurements, Brussels
  10. ECA-IAQ Report No.16. 1995. Determination of VOCs emitted from indoor materials and products - Second inter laboratory comparison of small chamber measurements, Brussels
  11. ENV 13419- 1. 1999. Building products -Determination of the emission of volatile organic compounds- Part 1: Emission test chamber method, Brussels, European Committee for Standardization
  12. European Collaborative Action. 1991. European Collaborative Action, Guideline for the characterisation of volatile organic compounds emitted from indoor materials and products using small test chambers. Report No.8, Commission of the European Communities, Brussels-Luxembourg
  13. European Collaborative Action. 1993. European Collaborative Action, Determination of VOCs emitted from indoor materials and products-interlaboratory comparison of small chamber measurements. Report No. 13, Commission of the European Communities, Brussels-Luxembourg
  14. Hawthorne, A. R. and T. G. Matthews. 1987. Models for estimating organic emissions from building materials: formaldehyde example, Atmospheric Environment 21 (2): 419-424 https://doi.org/10.1016/0004-6981(87)90021-7
  15. ISO 16000-9, 2006a ISO 16000-9, 2006a. Indoor-Air Part 9: Determination of the Emission of Volatile Organic Compounds from Building Products and Furnishings-Emission Test Chamber Method
  16. ISO 16000-10, 2006b ISO 16000-10, 2006b. Indoor-Air Part 10: Determination of the Emission of Volatile Organic Compounds from Building Products and Furnishings-Emission Test Cell Method
  17. Jarnstrom, H., K. Saarela, P. Kalliokoski, and A.-L. Pasanen. Reference values for structure emissions measured on site in new residential buildings in Finland Atmospheric Environment, In press
  18. Karlsson, S., Z. G. Banhidi, and A.-C. Albertsson. 1989. Gas chromatographic detection of volatile amines found in indoor air due to putrefactive degradation of casein-containing building materials, Materials and Structures 22: 163-169 https://doi.org/10.1007/BF02472183
  19. Kim, S. and H.-J. Kim. 2005a. Effect of addition of polyvinyl acetate to melamine-formaldehyde resin on the adhesion and formaldehyde emission in engineered flooring. International Journal of Adhesion and Adhesives 25: 456-461 https://doi.org/10.1016/j.ijadhadh.2005.01.001
  20. Kim, S. and H.-J. Kim. 2005b. Comparison of standard methods and gas chromatography method in determination of formaldehyde emission from MDF bonded with formaldehyde-based resins. Bioresource Technology 96: 1457-1464 https://doi.org/10.1016/j.biortech.2004.12.003
  21. Kim, S. and H.-J. Kim. 2005c. Comparison of formaldehyde emission from building finishing materials at various temperatures in under heating system; ONDOL. Indoor Air 15:317-325 https://doi.org/10.1111/j.1600-0668.2005.00368.x
  22. Kim, S., J.-A. Kim, H.-J. Kim, and S. D. Kim. 2006. Determination of formaldehyde and TVOC emission factor from wood-based composites by small chamber method. Polymer Testing 25(5): 605-614 https://doi.org/10.1016/j.polymertesting.2006.04.008
  23. Kim, S., H.-J. Kim, H.-S. Kim, Y.-K. Lee, and H.-S. Yang. 2006. Thermal analysis study of viscoelastic properties and activation energy of melamine-modified urea-formaldehyde resins. Journal of Adhesion Science and Technology 20(8): 803-816 https://doi.org/10.1163/156856106777638671
  24. Risholm-Sundman, M. 1999. Determination of formaldehyde emission with field and laboratory emission cell (FLEC)-recovery and correlation to the chamber method. Indoor Air 9: 268-272 https://doi.org/10.1111/j.1600-0668.1999.00006.x
  25. Risholm-Sundman, M. and N. Wallin. 1999. Comparison of different laboratory methods for determining the formaldehyde emission from three-layer parquet floors, Holz als Roh- und Werkstoff 57(5): 319-324 https://doi.org/10.1007/s001070050351
  26. Rothweiler, H., P. A. Wager, and C. Schlatter. 1992. Volatile organic compounds and some very volatile organic compounds in new and recently renovated buildings in Switzerland. Atmospheric Environment 26: 2219-2225 https://doi.org/10.1016/0960-1686(92)90411-D
  27. Tuomaninen, M., A.-L. Pasanen, A. Tuomaninen, J. Liesivuori, and P. Juvonen. 2001. Usefulness of the Finnish classification of indoor climate, construction of indoor climate between two new blocks of flats in Finland. Atmospheric Environment 35: 305-313 https://doi.org/10.1016/S1352-2310(00)00157-6
  28. Uchiyama, S., T. Akimoto, and S.-I. Tanabe. 2001. Emission rate measurement of chemical compounds emitted from the thermal insulating materials, International FLEC Symposium 2001. pp. 110-115
  29. Wen sing, M. 1999. Environmental test chambers. In: T. Salthammer, Editor, Organic Indoor Air Pollutants, Wiley-VCH, Weinheim
  30. Weschler, C. J. and H. C. Schields. 1997. Potential reactions among indoor air pollutants, Atmospheric Environment 31: 3487-3495 https://doi.org/10.1016/S1352-2310(97)00219-7
  31. Wilke, O., O. Jann, and D. Bradner. 2004. VOCand SVOC-emissions from adhesives, floor coverings and complete floor structures, Indoor Air 14: 98-107 https://doi.org/10.1111/j.1600-0668.2004.00314.x
  32. Wirtanen, L. 2005. Influence of moisture and substrate on the emission of volatile organic compounds from wall structures, Helsinki university of technology, Espoo. pp. 321
  33. Wolkoff, P. 1998. Impact of air velocity, temperature, humidity, and air on long-term VOC emissions from building products, Atmospheric Environment 32: 2659-2668 https://doi.org/10.1016/S1352-2310(97)00402-0
  34. Wolkoff, P., P. A. Clausen, and P. A. Nielsen. 1995. Application of the field and laboratory emission cell 'FLEC' - Performance study, intercomparison study, and case study of damaged linoleum in an office. Indoor Air 5(3): 196-203 https://doi.org/10.1111/j.1600-0668.1995.t01-1-00006.x
  35. Wolkoff, P., P. A. Clausen, C. K. Wilkins, and G. D. Nielsen. 2000. Formation of strong airway irritants in terpene/ozone mixtures, Indoor Air 10: 82-91 https://doi.org/10.1034/j.1600-0668.2000.010002082.x
  36. Wolkoff, P., P. A. Clausen, P. A. Nielsen, and L. $\varphi$lhave. 1991. The Danish twin apartment study; part I: formaldehyde and long-term VOC measurements. Indoor Air 4: 478-490
  37. Wolkoff P. and P. A. Nielsen. 1999. A new approach for indoor climate labeling of building materials-emission testing, modeling, and comfort evaluation. Atmospheric Environment 30: 2679-2689