• KSBB Journal
• /
• v.29 no.5
• /
• pp.385-391
• /
• 2014

In this study, the emulsion dispersion stability of optimizing storage temperature was investigated. The system was based on oil/water (O/W) emulsions. In order to evaluate the stability, mean diameter of droplet was measured as a function of temperature with various mixed hydrophilic lipophilic balance (HLB). In addition, the correlations between phase inversion temperature (PIT) and the optimum storage temperature were probed. In this system, majority of the smallest droplet was shown at temperature of $20^{\circ}C$ below PIT. Whether the temperature was increased or decreased from the optimum, size of the droplet increased. According to the mixed HLB, the particle size and optimum storage temperature were also affected. As the concentrations of surfactant were increased, the size of particle decreased with lower optimum temperature for storage. If the surfactant (4 wt%) were mixed with HLB, the optimum storage temperature was $21^{\circ}C$ for maintaining the size of smallest droplet at 108.3 nm in diameter. At above optimum condition, increased size of particle was observed approximately 4 % increases from 108.2 nm to 112.3 nm after 600 hours. The size of particle in emulsion was maintained stably without any considerable effect of Ostwald ripening phenomena at the optimum storage temperature with low polydispersity index.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.145-149
• /
• 2001

This paper did so that may can establish optimum temperature according to kind of vaccine and digitalized various action situations using PIC 16C74A-04A/SP. Also, PID Algorithm Controller designed to maintain optimum temperature using PIC. Begin to operating system after temperature setting, reached in optimum storage temperature within 30 minutes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.2
• /
• pp.189-199
• /
• 2000

This paper investigates the thermodynamic performance of latent heat thermal energy storage system using two phase change materials(2-PCM system). The thermodynamic merit of using 2-PCM is clear in terms of exergetic efficiency, which is substantially higher than that of 1-PCM system. Optimum phase change temperature to maximize the exergetic efficiency exists for each case. The heat transfer area ratio of high temperature storage unit, X, becomes another important parameter for 2-PCM system if the phase change temperatures of given materials are different from those of optimum conditions. It is a good approximation for X$_{opt}$ to be 0.5 when optimum phase change temperatures are used. Otherwise X$_{opt}$ is determined differently as a function of given phase change temperatures.res.

• Agricultural and Biosystems Engineering
• /
• v.3 no.2
• /
• pp.65-72
• /
• 2002

Temperature is the most influential environment parameter which affects the quality change of agricultural products in cold storage. Therefore, it is essential to keep the uniform temperature distribution in the storage room. This study was performed to analyze the air movement and temperature distribution in the forced recirculating cold storage facility and to simulate optimum storage method of green groceries using 3-D CFD(three dimensional computational fluid dynamics) computer simulation which applied the standard $textsc{k}$-$\varepsilon$ turbulence model and FVM(finite volume method). The simulation was validated by the experimental results for onion storage and the simulation model was used to simulate the temperature and velocity distribution in the storage room with reference to the change of storage method such as location of storage, no stores, bulk storage, and pallet storage. In case of no stores, internal airflow was circulated without stagnation and consequently air movement and temperature distribution were uniform. In case of bulk storage, air movement was stagnated so much and temperature distribution of onion was not uniform. Furthermore, the inner temperature of onion roses more than the initial temperature of storage. In case of pallet storage, air movement and temperature distribution of onion were so uniform that the danger of quality change was decreased.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.361-366
• /
• 2001

The purpose of installation of the brine heating system for LNG storage tank is the prevention of ground freezing. If the ground of LNG tank areas is frozen, it is caused by safety problems. The design of brine heating system for LNG storage tank which is constructing in our country is not well considered about domestic weather conditions and economical efficiency. Therefore, this paper reports on the study of the optimized temperature of inside pipes and cooling process through the transient analysis by using the existing brine heating system.

• Food Science and Preservation
• /
• v.4 no.2
• /
• pp.115-122
• /
• 1997

This experiment was hocused on the improvement of postharvest management of fresh shiitake to increase the marketing duration. the respiration rate of fresh shiitake at 2$0^{\circ}C$ was ranged from 395mg to 551mg CO2/kg/hr depending on the cultural condition. The rapid precooling is considered as one of the most important postharsvest management to remain shiitake quality. The optimum temperature for precooling and storage was -3$^{\circ}C$ because the occurrence of physical damage on frozen tissue at below -5$^{\circ}C$. Frozen storage at -3$^{\circ}C$ had benefits to minimize weight loss, browning induction at gill tissue and consumption of stored materials where as storage at $0^{\circ}C$ appeared not to be adequite for the extension of marking duration. Frozen shiitake was succesefully thawed when exposed to RH 40-50% at below 1$0^{\circ}C$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.6
• /
• pp.1317-1323
• /
• 2001

The circumstance is giving the blow against fishermen with the incoming-decreasing and the difficulty of crew's supply & demand and management. In addition, the depression of the external situation like the departure of WTO system and the plan of EEZ proclaim is forcing fishery into improving their fishing condition. By this international and domestic circumstance, development of the sea water cooling apparatus for fish hold storage is demanded sincerely. First of all, we Investigated load characteristics which based on development of sea water cooling system and optimum fish hold storage. The experimental results is as follows. In creasing the speed of compressor and mass blew rate of refrigerant, the temperature of NaCl solution is low. And the load characteristics experiment on fish hold storage outlet is as fellows. As time goes by, increasing the mass flow rate of NaCl solution, temperature difference between inlet and outlet is small in a model of fish hold storage. These results provide many useful informations applicable to an actual design of sea water cooling system and optimum fish hold storage.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.1
• /
• pp.29-35
• /
• 2022

This study was conducted to investigate the seed storage method and seed germination characteristics of Synurus deltoides (Ait.) Nakai, a kind of wild vegetables. Several parameters affecting seed germination, such as germination temperature, chilling duration, imbibition duration, and storage method were evaluated. The seed germination of Synurus deltoides showed the highest germination rate (GR), promptness index (PI), germination performance index (GPI), mean daily germination (MDG) at 25℃. This implies that the optimum germination temperature was 25℃. And also, Seeds stored at -4℃, after 150 days showed relatively high germination rate about 98%. Therefore, The optimum germination temperature of Synurus deltoides was 25℃ and to increase the germination rate over 98% of Synurus deltoides, cold-wet storage 20 days treatments at 4℃ were effective in the improvement of seed germination.

• Food Science and Preservation
• /
• v.2 no.2
• /
• pp.285-291
• /
• 1995

This study was performed to investigate the optimum moisture content and the best packaging method of dried persimmons for long term storage at room temperature. The package material to be used were 0.05mm polyethylene film, Wrap film, 0.08mm LDPE film exchanged nitrogen gas, and non package for untreated control. Before the storage, the initial moisture contents of dried persimmons were treated with 40%, 35% and 30%, respectively; 40% as traditional dryness, 35% as extending dry period one more week, and 30% as for two more weeks. The best package method was 0.08mm LDPE film exchanged nitrogen gas, and the optimum moisture control was 35%

• Korean Journal of Animal Reproduction
• /
• v.14 no.3
• /
• pp.199-204
• /
• 1990

Equine semen was analysed for its survival after storage under different conditions. Total 12 ejaculates from 2 Thoroughbred were analysed for general characterisitcs and preservation at low temperature. The sperm fraction, concentration, nd the rate of motile spermatozoa were 57.91ml per ejaculate, 2.18$\times$108/ml and 74.1%, respectively. The survival rate of spermatozoa was highest when diluted semen with E-Z Mixin was stored at 7~8$^{\circ}C$. The optimum survival rate(>54%) can be obtained upto 24h at 7~8$^{\circ}C$. However only 10% spermatozoa survived after 5h storage at 7~8$^{\circ}C$ without use of E-Z Mixin. Other ranges of temperature(15$^{\circ}C$ and room temperature) gave less survival rates(<25%). These results indicate that the extender could be used as a basic solution for the preservation of equine spermatozoa at low temperature. It also provides a practical method for short-term storage of collected equine semen in a simple manner.