• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.540-546
• /
• 2014

Acid mine drainage sludge (AMDS) has been classified as mine waste and generally deposited in land. For this reason, studies have been conducted to examine the possibility of recycling AMDS as an amendment for heavy metal stabilization in soil. The main objective of this study was to evaluate heavy metal stabilization efficiency of AMDS comparing with the widely used lime stone. Also, optimum mixing ratio was evaluated for enhancing heavy metal stabilization. AMDS and limestone were mixed at the ratio of 0:100, 25:75, 50:50, 75:25, and 100:0 with five different heavy metal solutions ($100mg\;L^{-1}$ of $NaAsO_2$, $CdCl_2$, $CuCl_2$, $Pb(NO_3)_2$, and $ZnSO_4{\cdot}7H_2O$). The amendments were added at a rate of 3% (w/v). In order to determine the stabilization kinetics, samples were collected at different reaction time of 0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 minutes. The heavy metal stabilization by AMDS was faster and higher than those of limestone for all examined heavy metals. While limestone showed only 20% of arsenic (As) stabilization after 1,024 minutes, 96% of As was stabilized within 1 minute by AMDS. The highest effect on the stabilization of heavy metal (loid) was observed, when the two amendments were mixed at a ratio of 1:1. These results indicated that AMDS can be effectively used for heavy metal stabilization in soil, especially for As, and the optimum mixing ratio of AMDS and lime was 1:1 at a rate of 3% (w/v).

• 생물환경조절학회지
• /
• 제23권1호
• /
• pp.39-42
• /
• 2014

본 연구의 목적은 선형, 쌍곡선, 베타 함수를 이용하여 상추의 주요 온도를 예측하기 위함이다. 상추 종자를 항온 생육상에서 발아시켰다. 온도처리는 $10^{\circ}C$, $14^{\circ}C$, $16^{\circ}C$, $20^{\circ}C$, $24^{\circ}C$, $28^{\circ}C$와 $32^{\circ}C$였다. 100개의 종자를 9cm 페트리디쉬에 필터페이퍼 2장을 깔고 4반복 실시하였다. 유근이 1mm 나왔을 때를 발아로 하였다. 시간에 따른 발아율은 로지스틱 함수로 계산하였다. 최저, 최적, 최고 온도는 50% 발아한 시점의 역수를 온도에 따른 함수로 표기하여 나타내었다. 선형 함수의 경우, 최저, 최적, 최고 온도는 각각 $7.9^{\circ}C$, $23.3^{\circ}C$, $28.0^{\circ}C$였으며, 쌍곡선 함수의 경우, 최저, 최적, 최고 온도는 각각 $9.7^{\circ}C$, $19.5^{\circ}C$, $29.4^{\circ}C$였으며, 베타 함수인 경우, 최저, 최적, 최고 온도는 각각 $3.7^{\circ}C$, $20.7^{\circ}C$, $32.0^{\circ}C$였다. 최저, 최적, 최고 온도 범위는 각각 $3.7{\sim}7.9^{\circ}C$, $19.5{\sim}23.3^{\circ}C$, $28.0{\sim}32.0^{\circ}C$이었다.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1278-1284
• /
• 2017

As of December 2016, there are 608,828 elevators in operation in Korea and 179,790 elevators in more than 15 years. 30.4% of all elevator are aging. Improved maintenance of the elevator and proactive replacement of the parts of the elevator can extend the lifetime of the elevator and ensure safety. An unclean environment reduces the lifetime of elevator parts. If you do not clean the environment and prevent preventive parts replacement, eventually shortening the lifetime of the parts connected to the failed part or causing more damage will result in greater economic loss. Also, the risk of elevator safety accidents due to failures of elevator parts will be increased accordingly. The study of optimum replacement time of elevator parts will contribute to prevention of safety accident of elevator and prolongation of lifetime of elevator through preventive replacement of elevator parts.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권2호
• /
• pp.40-46
• /
• 2010

In this study, microwave irradiation, which is reflected by metals, was used to reduce the amount of sewage sludge, and the results were used to verify solubilization efficiency and determine optimum operation conditions. Biogas production and methane content of the gas under optimized conditions were measured with the biochemical methane potential (BMP) test. The sludge was taken from a thickened sludge tank at J sewage treatment plant (JSTP) in Seoul, Korea. For the experiments, 50 mL of sludge was filled in vessels and the vessels were irradiated with the power of 500, 600, 700, and 800W for 2~5 min. In addition, Fe powder was added by 0.01, 0.05, and 0.1 g to compare the efficiency with and without Fe powder. The results confirmed that solubilization efficiency was higher in the presence of Fe powder. The optimum conditions of 0.01 g addition of Fe powder with 800W irradiation for 5 min, yielded nearly 22.95% higher solubilization efficiency than without Fe powder. The BMP tests were carried out using sludge obtained from the experiments carried out under the optimum conditions. As a result, sludge subjected by 800W with 0.01 g of Fe powder for 5 min displayed the highest level of gas production and methane content. Through this study, it could be confirmed that solubilization efficiency increased by addition of Fe powder.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.429-436
• /
• 2004

Circulating fluidized bed combustion (hereafter CFBC) technology enables an efficient combustion for the materials with low heating values such as high ash coal and sludges. It also has desulfation function by adding limestone directly to combustor. The CFBC has been considered as one of the best processes for low grade coal containing with large contents of ash and sulfur. In this paper, in order to various tests were performed to find the optimum desulfation condition for CFBC using Korean Anthracite. We surveyed possible parameters and conducted desulfation efficiency test in D Thermal Power Plant. In addition, the result of some fundamental theoretical consideration was discussed with CFBC. Optimum limestone size could be considered to be 0.1-0.3mm irrespective of combustion temperature and Ca/S molar ratio variation. Desulfation efficiency increased as the molar ratio increased. Because desulfation process occurs at the surface at higher temperature, inner side of limestone can＇t be utilized. When surface area is not appropriate, some SO$_2$ emit without reaction. Optimum molar ratio should be decided after considering chemical and physical properties of limestone and coal thoroughly such as particle size, pore size and HGI. Commercial CFBC is operated at Ca/S 1.6. Combustor temperature 840-87$0^{\circ}C$ shows good desulfation efficiency.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.231-238
• /
• 2014

Optimum lot size calculation for real world manufacturing environment has been focused since last few decades. Several extensions have been made to the basic economic order and production order quantity models to realize the possible practical situations in industry. However, focus on work-in-process inventory has been ignored relatively. This paper provides a comprehensive review of the models developed for group technology based manufacturing environment focusing on work-in-process inventory. Models have been extended from a perfect manufacturing conditions to an imperfect manufacturing situation considering rework, rejection and inspection. Optimum lot size has been evaluated using a simple algebraic optimization approach. Significant parameters are highlighted using sensitivity analysis for the developed models. Numerical example is used to illustrate the utilization of such models in day-to-day production setups and the impact of significant factors' variation on total cost and optimum lot size.

• 설비공학논문집
• /
• 제24권7호
• /
• pp.578-584
• /
• 2012

In this study, the analysis on the distribution of indoor airflow velocity and temperature by using numerical simulation has carried out to make fundamental data for establishing the optimum design of laboratory animal facilities. From the results, it was found that replacement of cage lacks, air supply and exhaust system, supply air temperature, supply air velocity affect to the optimum design of laboratory animal facilities as a important element.

• 생태와환경
• /
• 제54권1호
• /
• pp.71-77
• /
• 2021

Using data from flies collected with pitfall traps in 365 forests on a nationwide scale in Korea, the abundance and distribution changes of two families (Phoridae and Lauxaniidae) in Korean forests were predicted at the genus level according to two climate change scenarios: RCP 4.5 and RCP 8.5. The most suitable temperature for the 17 major genera was estimated using a weighted average regression model. Stichillus and Anevrina displayed the lowest optimum temperature with 7.6℃ and 8.5℃ in annual mean temperature, respectively, whereas Chonocephalus had the highest optimum temperature with 12.1℃. Among thirty genera, seven genera (four from Phoridae and three from Lauxaniidae), which showed their abundance in a bell-type or linear pattern along the temperature gradient, were used for predicting the distribution changes according to the future climate change scenarios. All the taxa of this study are expected to decrease in abundance and distribution as a function of temperature increase. Moreover, cold-adapted taxa were found to be more affected than warm-adapted taxa.

• 공업화학
• /
• 제17권6호
• /
• pp.619-624
• /
• 2006

유연탄을 연소하는 화력발전소의 탈황설비에서 생산된 배연탈황석고를 대상으로 가압반응기를 이용하여 수열반응을 통한 알파형 반수석고의 생성과정을 살펴보았다. 실험 결과 첨가제를 사용하지 않아도 반응온도 $120{\sim}140^{\circ}C$ 범위 하에서는 용해-재석출 기구에 의하여 알파형 반수석고가 생성되었으나 아스펙트 비가 매우 높은 침상형 결정이 생성되었다. 호박산나트륨을 첨가제로 주입한 결과 결정형상은 침상형에서 각주형으로 변화되었으며 혼수 비(water/powder ratio)는 33%까지 감소하였다. 호박산나트륨의 농도는 20 mM이 적정하였으며 반응도중 성형체의 붕괴를 방지하고 성형체의 기공부피에 의한 모세관 효과를 최대화하기 위한 최적의 성형체 성형압력은 $30kgf/cm^2$이었다.

• 한국인구학
• /
• 제29권1호
• /
• pp.269-292
• /
• 2006

오늘날 환경문제는 범지구적이며 인류의 생존 자체를 위협할 만큼 심각하다. 산업화가 환경문제 발생의 근원적 원인이다. 그러나 자연관 자연에 대한 지식 증가, 기술개발, 경제성장과 불평등, 인구 등 산업화의 과정 또는 결과로 인해 초래되는 개별 요소들도 환경문제 발생의 중요한 원인들로 지적되고 있다. 특히 인구를 환경문제 발생의 한 원인으로 보는 관점은 적정인구의 초과를 주장하고 있다. 그 이유는 인구가 지탱되는 데 필요한 의식주의 자원은 전적으로 자연에 의존하고 있고, 풍요롭고 편리한 의식주를 위한 재화와 용역의 생산, 유통, 소비 과정에서 배출되는 폐기물도 모두 자연으로 되돌아가는데 오늘날 인구수는 자연이 감당할 수 있는 자원공급과 폐기물 흡수 처리용량을 초과하고 있기 때문이다. 그러나 몇 명이 적정인구인가에 관한 연구는 국내외적으로 아직 없다. 이런 맥락에서 본 연구는 환경 측면에서 한국이 수용가능한 적정인구를 두 차원에서 추계하였다. 하나는 환경상태 및 이와 관련된 변인들에 기초한 추계이고, 다른 하나는 국민들이 바람직하다고 생각하는 환경상태와 이와 관련된 변인들에 기초한 추계이다. 전자는 객관적 상태에 기초한 추계이고, 후자는 사회적 합의에 의한 추계라고 할 수 있다. 객관적 상태에 의한 최소 적정인구는 약 4,749만 명으로 추계되었고, 사회적 합의에 의한 적정인구는 4,850만 명으로 추계되었다. 그러나 정부환경예산을 2.00%로 증액시키면 수용가능한 적정인구는 5,046만 명으로 증가한다. 이처럼 적정인구는 변인들의 값에 따라 증감한다. 적정인구 결정에 가장 강한 영향을 주는 변인이 정부의 환경예산이고, 다음으로 청정에너지공급 등이다. 그러나 본 연구는 1993년부터 2002년까지 10년간 시계일 자료에 기초한 적정인구 추계이기 때문에 다른 연도의 시계열 자료에 기초하면 적정인구 추계모형이 달라지고, 그 결과 적정인구수도 다르게 추계될 수 있다.