• 한국축산시설환경학회지
• /
• 제21권3호
• /
• pp.99-104
• /
• 2015

According to the volumetric mixing rate of dairy cow manure (DCM) and moisture control materials such as decomposed manure (DM) and sawdust (S), 6 reactors (DCM only (R1), DCM : DM = 1:1 (R2), DCM : DM = 1.5:0.5 (R3), DCM : DM = 0.5:1.5 (R4), DCM : DM:S = 1:0.5:0.5 (R5) and DCM : S = 1:1 (R6)) were used for composting of dairy cow manure. Among the composting reactors, composting reactor of R5 was shown the highest temperature of the compost as a $66^{\circ}C$ during composting period. After 3 weeks composting, moisture content of R5 and R6 were 51% and 51.3%, respectively. These values were satisfied with the moisture content standard of livestock manure compost of Korea. We concluded that decomposed manure may be a good moisture control material for dairy cow manure composting when it is used in mixture with sawdust. The optimum volumetric mixing ratio of dairy cow manure and moisture control materials was 50% of livestock manure, 25% of decomposed manure and 25% of sawdust.

• 대한환경공학회지
• /
• 제36권4호
• /
• pp.251-257
• /
• 2014

본 연구는 RO 해수담수화 전처리 공정으로써 응집 및 여과공정에 대하여 수행되었다. RO 시스템은 충분하고 안정적인 전처리를 통하여 RO 막오염을 완화 할 수 있는 우수한 수질을 공급할 수 있어야 한다. 본 실험은 RO 막 공정의 전처리로서 다양한 응집제 주입량, 응집 교반 강도 및 시간, 탁도, 여과속도 실험 조건을 사용하여 응집과 여과공정의 효과를 조사하기 위하여 수행되었다. 본 연구 결과 적합한 RO 공급수로 적절한 SDI 값을 나타내기 위한 최적 전처리 조건은 응집 pH 6.5, 탁도 4 NTU 이상 그리고 여재 충진 높이가 550 mm 이상인 것으로 나타났다. 그러나 응집교반 강도, 응집제 주입농도와 여과속도는 여과효율에 비교적 큰 영향을 미치지 않은 것으로 나타났다.

• 상하수도학회지
• /
• 제32권1호
• /
• pp.1-10
• /
• 2018

Recently, interest in the development of alternative water resources has been increasing rapidly due to environmental pollution and depletion of water resources. In particular, seawater desalination has been attracting the most attention as alternative water resources. As seawater desalination consumes a large amount of energy due to high operating pressure, many researches have been conducted to improve energy efficiency such as energy recovery device (ERD). Consequently, this study aims to compare the energy efficiency of RO process according to ERD of isobaric type which is applied in scientific control pilot plant process of each $100m^3/day$ scale based on actual RO product water. As a result, it was confirmed that efficiency, mixing rate, and permeate conductivity were different depending on the size of the apparatus even though the same principle of the ERD was applied. It is believed that this is caused by the difference in cross-sectional area of the contacted portion for pressure transfer inside the ERD. Therefore, further study is needed to confirm the optimum conditions what is applicable to the actual process considering the correlation with other factors as well as the factors obtained from the previous experiments.

• 콘크리트학회논문집
• /
• 제18권5호
• /
• pp.649-656
• /
• 2006

본 연구에서는 재생 골재 콘크리트의 현장적용성을 높이기 위해 보통 콘크리트에 비해 큰 슬럼프 손실을 개선할 수 있는 분말형 감수제(PSP제)를 개발하였다. 이 PSP제가 혼입된 콘크리트의 유동성 및 역학적 성질들을 평가하기 위하여 재생 굵은골재와 재생 잔골재 혼입조건에 24배합이 실험되었다. 액상형 고성능 감수제를 투입한 콘크리트의 슬럼프는 시간경과와 함께 급격히 감소하며 120분 후에는 초기 슬럼프의 50% 이하로 떨어졌다. 하지만 PSP 제를 혼입한 콘크리트의 슬럼프는 배합 후 30분 까지는 거의 변화가 없으며 1시간 경과 후에도 초기 슬럼프의 85% 이상을 유지하였다. 뿐만 아니라 PSP제는 콘크리트의 압축강도, 할렬인장강도, 휨강도 및 탄성계수들도 향상시켰으며 건조수축 변형률을 감소시켰다. 콘크리트의 성능향상을 고려하였을 때 PSP제의 최적 혼입률은 시멘트 양 대비 5%이었다.

• 한국수산과학회지
• /
• 제23권3호
• /
• pp.198-207
• /
• 1990

하천과 연안의 극심한 오염을 유발하고 있는 액상폐기물을 동해남부해역에 투기할 목적으로 용존산소분포에 기초하여 허용농도와 최적투기율을 결정하였다. 허용농도 산출은 Streeter-Phelps 모델을 이용하였으며 이 모델의 인자인 탈산소계수는 2개월 간격으로 1년동안 각 수심별 해수에 유기물을 주입한 후 산소소모양을 측정하여 Thomas slope method에 따라 구하였고, 재폭기계수는 Redfield의 폐쇄계모델을 적용, 1년간의 현장관측재료와 C. S. K 자료를 이용하여 산출하였다. 투기율은 Csanady의 초기희석 이론을 적용하였다. 연구결과 표층에서 각 수심까지의 탈산소계수는 하계 $0.24\~0.29/day$, 동계 $0.17\~0.20/day$였으며, 재폭기계수는 하계 $0.03\~0.39/day$, 동계 $0.04\~0.56/day$이었다. 이들 인자로써 초기희석수괴의 용존산소를 $5mg/{\iota}$ 이상으로 유지할 수 있는 각 수심까지의 허용농도는 하계 $2.83\~7.33mgBOD/\iota$, 동계 $4.37\~18.83mgBOD/\iota$이었다. 혼합수심(H)과의 관계를 이용하여 산출된 허용농도($mgBOD/\iota$)는 하계 $17.23\times(H)^{-0.37}$, 동계 $54.96\times(H)^{-0.62}$으로 표현할 수 있었다. 이 허용농도에 기초하여 최적투기율($m^3/sec$)은 이호의 폭(b, m), 흘수(h, m) 그리고 폐기물의 BOD($L_n$, $mg/\iota$)의 함수로 하계에는 $R=275{\times}bh^{0.63}/L_n$, 동계에는 $=745{\times}bh^{0.48}L_n$으로 산출되었다. 이러한 차리는 하계와 동계의 용존산소농도 분포와 이를 좌우하는 각 인자에 기인한 것이다.

• 한국대기환경학회지
• /
• 제30권4호
• /
• pp.339-349
• /
• 2014

$CO_2$ emission has been gradually increased due to rising fossil fuel use. A gliding arc plasma scrubber (GAPS) was proposed to destruct $CO_2$. For optimum design of GAPS, a CFD analysis has been conducted in different configuration for the system. The parameters considered included gas injection velocity at the nozzle and gas flow rate to gap between electrodes. The reactor configuration affected velocity fields which caused changes in the mixture fraction and the retention time. The mixing effect of $CO_2$ and supplied gas ($CH_4$ and steam) was enhanced by installing a orifice baffle. This revealed that the orifice baffle is effective in $CO_2$ conversion by positioning the reactants in the gas into the center of plasma discharge.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.263-268
• /
• 2001

In this study, the physical and mechanical characteristics of Bottom-ash exhausted from each of steam power plant was considered. The comparative objects were Bottom-ash in which a lot of powder contained and that in which less than that relatively contained. The difference in quantity of powder showed different effect on the character of flow. This study was undertaken on the use of Bottom-ash as a fine aggregate, and showed the optimum mixing and the character of flow according to each rate. And this study showed the quantity of water and binder added in different Bottom-ash was differently used.

• 한국분무공학회지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2009

This study carried out numerical analysis of flow field of combustion gas and sorbent to test sorbent efficiency of DSI process. To provide rapid mixing for increase utilization rate of sorbent, streamwise vorticity can be introduced into the flowing streams by other means; for example, by installing vortex generators immediately downstream of the wavy trailing edge. Computing results show that the degree of sorbent dispersion depends strongly on duct structure. Highest dispersion efficiency received when vortex generator was installed inside of duct. The results presented in this study a optimum condition for the development of practical DSI process.

• Elastomers and Composites
• /
• 제52권1호
• /
• pp.17-21
• /
• 2017

The optimum mixing conditions of silica and silane containing rubber composites were evaluated by investigating the properties of rubber composites prepared with a silica composition of 10, 20, 40, 60, and 80 g, respectively. The crosslinking rate decreased with increasing silica content, with he promoters being adsorbed on the silica surface with in the rubber composite. As a result, the increase in crosslinking time resulted in the destruction of the silica structure. The increase of the bound rubber content due to the destruction of the silica structure inhibited the chain motion of the polymer molecules and reduced the cohesion of the silica itself. Finally, the increase of silica content showed the increase of hardness, tensile strength, and storage modulus of rubber composites.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.509-516
• /
• 1995

The treatment performances of anaerobic-aerobic activated sludge process were investigated under various operation conditions. The treatment system proposed in this study gave a relatively stable performance against hourly change of the flow rate and showed a satisfactory removal of nitrogen and phosphorus compounds under experimental conditions. The recycle ratio of mixed liquor from aerobic to anaerobic region and peak coefficient primarily controlled the extent of nitrogen removal. The recycle ratio had the optimum values which were determined by the microbial activities of nitrification and denitrification. The behavior of the treatment unit could be simulated by using the kinetic equations and reactor models which considered the treatment units as complete mixing tanks.