• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.4
• /
• pp.201-212
• /
• 2016

A Wind resource assessment and optimal micrositing of wind turbines were implemented for the development of an onshore wind farm of 30 MW capacity on Gadeok Island in Busan, Republic of Korea. The wind data measured by the automatic weather system (AWS) that was installed and operated in the candidate area were used, and a reliability investigation was conducted through a data quality check. The AWS data were measured for one year, and were corrected for the long term of 30 years by using the modern era retrospective analysis for research and application (MERRA) reanalysis data and a measure- correlate-predict (MCP) technique; the corrected data were used for the optimal micrositing of the wind turbines. The micrositing of the 3 MW wind turbines was conducted under 25 conditions, then the best-optimized layout was analyzed with a various wake model. When the optimization was complete, the estimated park efficiency and capacity factor were from 97.6 to 98.7 and from 37.9 to 38.3, respectively. Furthermore, the annual energy production (AEP), including wake losses, was estimated to be from 99,598.4 MWh to 100,732.9 MWh, and the area was confirmed as a highly economical location for development of a wind farm.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.4
• /
• pp.67-79
• /
• 2002

The purpose of this study is to present criteria of selection of optimum grout materials through analyzing the limitation of permeability of each materials(MSG-N, OPC), in various ground conditions by comparing presentation of strength and permeability of MSG method and LW method(or SGR method). To do that, physical and chemical characteristics of grout materials were analyzed and compressive tests of homogel, mixed coagulation materials and hardening materials in certain mixing ratio, and of milk paste. In addition, permeability tests for each ground soil, each injection pressure, and each materials in combined stratum were performed with massive chamber. The results of tests showed that ultra fine grout materials like grout of MSG is necessary to construct effective grouting in sand and silty sand ground. Also, it is expected to become chemical grouting guide data to layout construction engineers because presented proper injection pressure by kind of object ground in case using ultra-fine grout material.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.137-143
• /
• 2016

The fifth wheel coupler is a heavy automotive coupling structure which connects a tractor and a trailer used for heavy-duty trucks widely. It is subjected to various loads simultaneously such as rolling, pitching and yawing loads as well as coupling frictional and impact loadings. Most of existing couplers have been overdesigned and, therefore, it is necessary to reduce the dead weight to increase the fuel efficiency. The topology optimization was applied in order to find conceptual layout designs which could show major load paths and ribs locations, and then the size structural optimization was performed in order to determine the heights and thicknesses of coupler ribs with the predetermined various loading conditions for the development of a new slim coupler with a minimum weight and high enough strength and stiffness. As the results of the topology optimum design, an efficient new coupling structure for truck trailers was designed. The weight of the new fifth wheel coupler was reduced by 4.9 %, compared with the existing one, even though all strength requirements were satisfied. The fatigue test of the new coupler was performed with cyclic vertical loads (+78.4 to +235.2 kN) and horizontal loads (-91.2 to +91.2 kN) simultaneously at 1 Hz and the life of 2,000,000 cycles were achieved without failure.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.3
• /
• pp.2029-2034
• /
• 1970

This research was attempted to study on the effects of desalinization by the depth and interval of open conduit in Kang-Hwa polder where is located at the Kil-sang Myun, Kang-Hwa Gun, Kyung-gi Do, and it has been continued for the three years from 1967 to 1969. The results obtained are as follows; 1. The depths of saline expulsion by supplying of irrigation water are approximately 30cm to 50cm under the ground surface, but saline expulsion is hardly done in case of the depth which is deeper than the above mentioned, because the moisture and saline content hardly change in such a condition. 2. The speed of vertical percolation gradually decreases below the 30cm depth, but it is noticed that there is a tendency to make the percolation of the horizental direction from its layer in Kang-Hwa reclaimed tidal land. 3. Comparing experimental treatments-varing depths and intervals of open conduits, the interval of open conduit has a more effect upon the promotion of desalinization and increasing of the rice yields than the depth of it. Therefore, according to the results of experimental data, the optimum depth of open conduit is about 0.9m, the effective interval of it is about 18m. 4. Considering the loss of arable area by the layout of open conduit, the reasonable interval of it could extend to 36m.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.2
• /
• pp.125-133
• /
• 2001

With development of computer engineering and the examination theories, new techniques to use computers in making or administrating examinations had been studied and developed. Recently, studies on web-based testing are in progress with development of Internet and information and communication technology. However, as compared with development of these technical aspects, studies on the user legibility to provide learners with comfortable environment for the evaluation have been insufficient in fact. In the web-based testing, user legibility decreases the anxiety of examinees in the examination and plays an important role in measuring their competence exactly. In this study, we tried to provide the optimum web-based evaluation interface by obtaining information through a questionnaire for primary-school students. We think that principles suggested in this study can give a great help in making the web-based evaluation screen in future. Besides, studies on more various fields including making individual questions, instructing sentences and layout of multimedia factors as well as the principles mentioned in this study should be performed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.2
• /
• pp.181-190
• /
• 2005

In the conventional outrigger system, the outriggers are located in the planes of the core walls and this system has disadvantage of obstructing flexibility in the interior layout. But thc facade riggers in the structure uc located In the exterior frames in the direction of the lateral loading. The interaction between the traced frames and facade riggers is through the floor diaphragms adjacent to the chords of the riggers. This paper presents an approximate analysis technique lot preliminary analysis of multiple facade rigger stiffened braced frames in tall buildings subjected to uniformly and triangularly distributed loads as well as a lateral point load at the top of the structure. Comparisons with the results by the program MIDAS for the structural models have shown that this analysis can give reasonably accurate results for highrise braced frames with multiple facade riggers. The method allows a simple procedure for obtaining the optimum level of the facade riggers in addition to a rapid assessment of the influence of the facade riggers on the performance of the highrise structure such as the reduction in lateral deflection at the top and the overturning moment at the base of the braced frame.

• Smart Structures and Systems
• /
• v.19 no.4
• /
• pp.341-350
• /
• 2017

Based on the super elastic properties of the shape memory alloy (SMA) and the inverse piezoelectric effect of piezoelectric (PZT) ceramics, a kind of hybrid semi-active control device was designed and made, its mechanical properties test was done under different frequency and different voltage. The local search ability of genetic algorithm is poor, which would fall into the defect of prematurity easily. A kind of adaptive immune memory cloning algorithm(AIMCA) was proposed based on the simulation of clone selection and immune memory process. It can adjust the mutation probability and clone scale adaptively through the way of introducing memory cell and antibody incentive degrees. And performance indicator based on the modal controllable degree was taken as antigen-antibody affinity function, the optimization analysis of damper layout in a space truss structure was done. The structural seismic response was analyzed by applying the neural network prediction model and T-S fuzzy logic. Results show that SMA and PZT friction composite damper has a good energy dissipation capacity and stable performance, the bigger voltage, the better energy dissipation ability. Compared with genetic algorithm, the adaptive immune memory clone algorithm overcomes the problem of prematurity effectively. Besides, it has stronger global searching ability, better population diversity and faster convergence speed, makes the damper has a better arrangement position in structural dampers optimization leading to the better damping effect.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.17-30
• /
• 2006

This study is for the size calculation of classroom based on the size of human body and teaching tools. The curriculum of Elementary school has been changed since 1960. It has been reflected on the size of classroom of elementary school. The new education curriculum-the 7th curriculum- demands various activities in classroom. And the Ministry of Education repealed the statute about the facilities of the schools on September in 1997. So we need to different size of unit space of the classroom in elementary school because the size of classroom will affect the quality of education. It is generally known that a part of human body-size has an invariable proportion with human's status, age and weight. In this study, regression analysis is used to find out a part of human body-size of Korean. Then the size of classroom is calculated by the part of human body-size, teaching tools and the type of desk arrangement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.521-527
• /
• 2011

POWER PC series are common to the Central Processing Unit for Military Single Board Computer. Among them, G4 group, which contains the 74xx series supported by Freescale manufacturer is mainly used in the Military applications. We focus on the Interface between memory and controller. PCB stacking method, component routing, impedance matching and harsh environment for Military spec are the main constraints for implementation. Also, we developed memory as a module for the consideration of Military environments. The overall type of SBC should be designed by the form of 6U VME or 3U VME. Therefore this study suggests the electrically optimum Interface matching, Artwork technology based on the signal cross over and PCB stacking method on the harsh environment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.2
• /
• pp.134-142
• /
• 2010

A comparative study on the trade-off between the drive current and the total gate capacitance in double-gate (DG) and triple-gate (TG) FinFETs is performed by using 3-D device simulation. As the first result, we found that the optimum ratio of the hardmask oxide thickness ($T_{mask}$) to the sidewall oxide thickness ($T_{ox}$) is $T_{mask}/T_{ox}$=10/2 nm for the minimum logic delay ($\tau$) while $T_{mask}/T_{ox}$=5/1~2 nm for the maximum intrinsic gate capacitance coupling ratio (ICR) with the fixed channel length ($L_G$) and the fin width ($W_{fin}$) under the short channel effect criterion. It means that the TG FinFET is not under the optimal condition in terms of the circuit performance. Second, under optimized $T_{mask}/T_{ox}$, the propagation delay ($\tau$) decreases with the increasing fin height $H_{fin}$. It means that the FinFET-based logic circuit operation goes into the drive current-dominant regime rather than the input gate load capacitance-dominant regime as $H_{fin}$ increases. In the end, the sensitivity of $\Delta\tau/{\Delta}H_{fin}$ or ${{\Delta}I_{ON}}'/{\Delta}H_{fin}$ decreases as $L_G/W_{fin}$ is scaled-down. However, $W_{fin}$ should be carefully designed especially in circuits that are strongly influenced by the self-capacitance or a physical layout because the scaling of $W_{fin}$ is followed by the increase of the self-capacitance portion in the total load capacitance.