Forces and Displacements of Highrise Braced Frames with Facade Riggers

여러개의 파사드리거를 갖는 고층구조물의 응력과 변위

  • 육민혜 (전주대학교 대학원 건축공학과) ;
  • 정동조 (전주대학교 공학부)
  • Published : 2005.06.01

Abstract

In the conventional outrigger system, the outriggers are located in the planes of the core walls and this system has disadvantage of obstructing flexibility in the interior layout. But thc facade riggers in the structure uc located In the exterior frames in the direction of the lateral loading. The interaction between the traced frames and facade riggers is through the floor diaphragms adjacent to the chords of the riggers. This paper presents an approximate analysis technique lot preliminary analysis of multiple facade rigger stiffened braced frames in tall buildings subjected to uniformly and triangularly distributed loads as well as a lateral point load at the top of the structure. Comparisons with the results by the program MIDAS for the structural models have shown that this analysis can give reasonably accurate results for highrise braced frames with multiple facade riggers. The method allows a simple procedure for obtaining the optimum level of the facade riggers in addition to a rapid assessment of the influence of the facade riggers on the performance of the highrise structure such as the reduction in lateral deflection at the top and the overturning moment at the base of the braced frame.

파사드리거는 아웃리거 구조시스템에 rms거하는 것으로 구조물의 외곽에 설치되는 파사드리거는 구조물의 내부에 수직으로 설치된 가새골조로부터 분리되어 구조물의 외곽에 설치된다. 따라서 이 시스템은 중앙의 코아에 부착되는 아웃리거와는 달리 사재로 인한 내부 동선의 장애가 발생하지 않는 장점이 있다. 리거의 현재에 인접한 슬래브가 파사드리거와 가새골조 사이의 전단력을 전달하며 가새골조와 파사드리거를 지지하는 기둥 사이의 상호작용을 일으킨다. 이 논문에서는 등분포하중과 삼각분포하중, 그리고 구조물 상단에 집중하중이 작용하고 구조물의 외곽에 여러개의 파사드리거가 설치된 가새골조에 대한 근사해석방법을 제시하였으며, 구조모델들을 이용하여 MIDAS프로그램에 의한 결과와 비교하였고 만족할만한 결과를 얻었다. 본 연구에서 제시된 매트릭스 해석방법은 구조물 상단의 수평변위나 가새골조 하단의 전도모멘트와 같은 구조물의 거동에 대한 파사드리거의 영향을 신속하게 평가할 수 있으며 구조물 상단의 변위를 최소화할 수 있는 파사드리거의 최적위치 결정을 위해 유용하게 사용될 수 있을 것이다.

Keywords

References

  1. 김지영, 김명한, 김상대(1996) Outrigger 시스템의 구조적거동 및 효율성에 관한 연구, 대한건축학회 학술발표 논문집, 16(1), pp.353-358
  2. 송화철(1999) 엇갈림 오프셋 아웃리거 超高層 構造 시스템의 效率性, 대한건축학회논문집 구조계, 15(11), pp.19-26
  3. Hoenderkamp, J. C. D., Snijder , H.H.(2000) Simplified analysis of facade braced high-rise structures, Struct. Des. Tall Build., 9(3). pp. 309-319 https://doi.org/10.1002/1099-1794(200009)9:4<309::AID-TAL155>3.0.CO;2-Y
  4. Hoenderkamp, J. C. D., Snijder, H.H. (2003) Prdliminary analysis of High-rise braced frames with facade rigger, American Society of civi Engineers, pp.640-647
  5. Stafford Smith. B., Coull. A.(1991) Tall building structure: Analysis and design, Wiley, New York
  6. Stafford Smith. B., Cruvellier. M., Noller. M.J ., Mahavari, A.T.(1996) Offset outrigger concept for tall building structures, Proc., 67th Reeionel conf. on Tall Buildinas-a World View, Council on tall Buildings and Urban Habitat, Lehigh Univ., Bethlehem, pp.73-80
  7. Stafford Smith. B., Salim. L.(1981) Parameter study of outrigger braced tall building structures, J. Struc. Eng., 107(10), pp.2001-2014