• 한국해양공학회지
• /
• 제18권5호
• /
• pp.29-35
• /
• 2004

A new approach, referred to as a successive zooming genetic algorithm (SZGA), is proposed for identifying a global solution, using continuous zooming factors for optimization problems. In order to improve the local fine-tuning of the GA, we introduced a new method whereby the search space is zoomed around the design variable with the best fitness per 100 generation, resulting in an improvement of the convergence. Furthermore, the reliability of the optimized solution is determined based on the theory of probability, and the parameter used for the successive zooming method is optimized. With parameter optimization, we can eliminate the time allocated for deciding parameters used in SZGA. To demonstrate the superiority of the proposed theory, we tested for the minimization of a multiple function, as well as simple functions. After testing, we applied the parameter optimization to a truss problem and wicket gate servomotor optimization. Then, the proposed algorithm identifies a more exact optimum value than the standard genetic algorithm.

• Composites Research
• /
• 제20권1호
• /
• pp.1-7
• /
• 2007

본 논문에서는 골프클럽샤프트의 정적특성의 최적화 방법론을 제시하였다. 복합재료를 사용한 샤프트의 최적성능향상을 위한 쉬트 프리프레그의 적층순서를 구하였다. 클럽샤프트의 굽힘 강성과 비틀림 강성의 동시 최적화를 위하여 새로운 최적화 목적함수를 제시하였다. 샤프트의 정적특성 분석을 위하여 고전적층 이론을 적용하였으며 최적화 방법으로서 적층순서를 설계변수로 정의하는 유전알고리즘을 사용하였다. 또한 얻어진 최적적층순서를 바탕으로 한 샤프트의 동적특성을 분석하였다.

• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.425-431
• /
• 2015

본 논문에서는 균열 진전문제에 대하여 페리다이나믹스 이론을 이용하여 설계민감도 해석 및 구조 최적설계를 수행하였다. 페리다이나믹스는 해의 불연속성을 다루기 어려웠던 기존의 연속체 이론에 비해 균열 진전문제와 같은 불연속성을 가지는 문제를 자연스럽게 표현할 수 있다는 장점을 가지고 있다. 최적설계를 진행하기 위하여 애조인 변수법으로 설계민감도를 유도하였다. 특히 균열이 진전되더라도 애조인 변수법으로 계산된 변위장과 변형에너지에 대한 설계민감도 값은 유한차분법과 비교하여 매우 정확하고 효율적임을 보였다. 이를 바탕으로 간단한 인장응력 하의 균열진전 문제에 대하여 균열의 분기가 발생하는 위치를 조절하기 위하여 정해진 시간구간에서 변형에너지 값을 줄이는 방향으로 최적설계를 수행하였다. 최적의 재료분포로 해석을 수행한 결과 균열의 분기점을 늦출수 있음을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제15권3호
• /
• pp.39-45
• /
• 2012

In this study, optimization of the impeller and design of volute were carried out in order to improve the performance of a centrifugal pump. Design parameters from vane plane development for impeller design were selected, and effect of the design parameters on the performance of the pump was analyzed by using Response Surface Methodology(RSM) to optimized impeller. In addition, total pump design method was suggested by designing volute which was suitable for the optimized impeller through volute design where Stepanoff theory was applied and numerical analysis.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.317-324
• /
• 2004

Shape design optimization of shell structure is implemented on a basis of integrated framework of geometric modeling and finite element analysis which is constructed on the geometrically exact shell theory. This shell theory enables more accurate and robust analysis for complicated shell structures, and it fits for the nature of B-spline function which Is popular modeling scheme in CAD field. Shape of laminated composite shells is optimized through genetic algorithm and sequential linear programming, because there ire numerous optima for various configurations, constraints, and searching paths. Sequential adaptation of global and local optimization makes the process more efficient. Two different optimized results of laminated composite shell structures to minimize strain energy are shown for different layup sequence.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.23-31
• /
• 2003

A novel 3D shape optimization algorithm is presented for electromagnetic devices carry-ing eddy current. The algorithm integrates the 3D finite element performance analysis and the steepest descent method with design sensitivity and mesh relocation method. For the design sensitivity formula, the adjoint variable vector is defined in complex form based on the 3D finite element method for eddy current problems. A new 3D mesh relocation method is also proposed using the deformation theory of the elastic body under stress to renew the mesh as the shape changes. The design sensitivity f3r the sur-face nodal points is also systematically converted into that for the design variables for the parameterized optimization application. The proposed algorithm is applied to the optimum design of the tank shield model of the transformer and the effectiveness is proved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.937-940
• /
• 1988

The problem of minimization of energy, consumed by the robot manipulator, is important, notably for larger manipulators, higher working speeds, and loads. Obviously, the stated problem requires the application of optimal control theory, which is being successfully applied for linear system and certain classes of nonlinear systems. However, the application of optimal control theory(in energy or time optimization) leads to substantial practical difficulties, so that significant simplifications are usually performed, either in model complexity or by neglecting the existing constraints. In this paper the problem of obtaining such an optimization method. which would take into account the complete system dynamics and all the constraints is considered. The only method found to be suitable for such a complex optimization should be based on dynamic programming.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권2호
• /
• pp.473-493
• /
• 2019

5G vehicular communication is one of key enablers in next generation intelligent transportation system (ITS), that require ultra-reliable and low latency communication (URLLC). To meet this requirement, a new hybrid vehicular network structure which supports both centralized network structure and distributed structure is proposed in this paper. Based on the proposed network structure, a new vehicular network utility model considering the latency and reliability in vehicular networks is developed based on Euclidean norm theory. Building on the Pareto improvement theory in economics, a vehicular network uplink optimization algorithm is proposed to optimize the uplink utility of vehicles on the roads. Simulation results show that the proposed scheme can significantly improve the uplink vehicular network utility in vehicular networks to meet the URLLC requirements.

• 대한전자공학회논문지
• /
• 제19권5호
• /
• pp.12-19
• /
• 1982

현재까지의 적응 필터(adaptive filter)의 설계 방법을 대별하면 국부 파라미타 최적화(local parameter optimization)방법[1]과 안정성(stability)을 주한점으로 하는 방법[1-3] 의 두 가지로 된다. 그리고 이들 중에서 비교적 간단한 방법은 로칼 파라미터 최적화 방법으로서, 이것에서는 스티피스트-디샌트(steepest-descent)방법[15]을 이용하는 LMS 알고리즘을 대표적인 것으로 들 수 있다. 적응 필터의 설계에 있어서 가장 중요한 것은 수검 속도를 높이는 일이다. 본 논문은 적응 비순환 필터의 설계를 위한 고속 수검 알고리즘을 개발하는 문제에 관하여 연구한 것으로, 적응 이득(adaptation-gain)을 적절히 조정함으로써, 종래 사용되어 오던 LMS 알고리즘 및 그의 변형인 여러 알고리즘에 비하여 수검 속도를 높일 수 있으며 동시에 안정성이 높은 새로운 알고리즘을 제시하였다. 그리고 제안된 알고리즘을 이용한 적응 필터의 특성 배선 문제를 다각도로 검토하였다.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.210-221
• /
• 2000

Plastic mold designers and frequently faced with optimizing multi-quality issues in injection molded parts. These issues are usually in conflict with each other and thus tradeoff needs to be made to reach a final compromised solution. in this study an automated injection molding design methodology has been developed to optimize multi-quality characteristics of injection molded parts. The features of the proposed methodology are as follows : first utility theory is applied to transform the original multi-objective problem into single-objective problem. Second is an implementation of a direct search-based injection molding optimization procedure with automated consideration of robustness against process variation. The modified complex method is used as a general optimization tool in this study. The developed methodology was applied to an actual mold design and the results showed that the methodology was useful through the CAE simulation using a commercial injection molding software package. Applied to production this study will be of immense value to companies in reducing the product development time and enhancing the product quality.